521531
26
Zoom out
Zoom in
Previous page
1/32
Next page
24
APPENDIX
Time reset to 12:00 The base power was removed or base was reset :
The base if power was interrupted, the time will also reset or perform Default.
Please set the time again.
Replace or remove the batteries
D20T is in strange mode Reset all the user-set features to the factory DEFAULT (refer to paragraph Re-
initialize the base, page 19).
D20T cannot make call The base unit may not be correctly connected:
Ensure the base unit is correctly installed and connected. Make sure that the
power is On.
Other handset are already in communications (in multi handset user):
Make sure that, only one internal or external call can be made at the same time.
Ensure that other handset is not already in communication prior to use.
Network Failure:
Try making a call from another telephone. If unsuccessful, contact your network
supplier.
If connected to PABX:
Make sure you have entered the correct PABX code in PBX feature of D20T.
Base Station does not function Error in connection or lack of power supply:
Ensure that the Adaptor power supply has been connected to the D20T and and
the adaptor is properly plug in to the AC power plug. Ensure that the AC power
should match the Adapotr AC voltage.
Make a power off / on reset of the base by removing and plug-in back the power
supply.
Handset does not function Battery may not be installed correctly:
Ensure that the battery pack has been correctly installed. Follow the polarity
marking of the baterry and the drawing on D20T handset battery compartment.
Make sure the battery is fully charge. If not, need to charge it on the base cradle.
If the rechargeable batteries are not being properly recharged, please change
them (refer to chapter Erreur ! Source du renvoi introuvable., Fehler! Textmarke
nicht definiert.). In order to prevent any damage to your handset, only use
rechargeable batteries of the following type: NiMH 1.2 V 600 mAh AAA. Do not
use non-rechargeable batteries.
Registration fail Wrong registration procedure:
Make sure that you know your D20T system CODE. If you are registering a new
handset to your D20T base, (refer to paragraph Registering a second handset
to a base, page 21). Try again if possible.
The handset displays "non
enregist"
Your handset is not registered on a base, (refer to paragraph Registering a
second handset to a base, page 21).
Note: When the handset is not registered on a base, you can access only to the
REGISTRATION menu.
LU 251619615_D20T_GB_SAGEM.book Page 24 Jeudi, 26. août 2004 4:54 16
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem D20T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem D20T in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagem D20T

Sagem D20T User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info