521549
163
Zoom out
Zoom in
Previous page
1/170
Next page
English
- 22 -
12.2.2. Remote access control
To remotely access your answering machine: Dial your telephone number and wait for the
answering machine to come on.
When your outgoing message is played, press # and enter your remote access code (0000 by
default).
Note!
The code for remote access to the answering machine corresponds in fact to the
PIN Code of your Base. This code is 0000 by default, and it can be modified from
the "ADVANCED SET / CHANGE PIN" menu (refer to the paragraph “Base master PIN code”
page 14).
A beep will indicate access to the answering machine. You can carry out the following
operations:
1: Previous message.
2: Listen to your messages.
3: Next message.
6: Delete the current message.
8: Stop the playback of the message.
9: Switch OFF the answering machine.
12.3.
Selecting the answering machine language
You can choose the language of your answering machine. The messages will be played back in
the language you select.
1. Press
. Select "answ machine " using the or , press .
2. Select "settings" using the or key, press
.
3. Select "language" using the or key, press
.
4. In the list, choose the desired language using the  or key.
12.4.
Memory status
Your answering machine has a capacity of 15 minutes (2 minutes for the OGM and 13
minutes for the messages) or 59 messages.
When your answering machine reaches its maximum recording capacity, you can no longer
receive new messages.
13. Changing the battery
Make sure the telephone is OFF before you replace battery.
1. Remove the battery compartment door.
2. Disconnect the jack attached to the battery pack then remove the battery pack from the
handset.
3. Insert the new battery pack and connect the cord into the jack inside the handset.
4. Put the battery compartment door back on.
5. Place handset in the base to charge. Allow the handset battery to properly charge (for
12 hours) prior to first use or when you install a new battery pack. If you do not properly
charge the phone, battery performance will be compromised.
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem D16V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem D16V in the language / languages: English, German, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 6,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info