521549

Sagem D16V Manual

157
Zoom out
Zoom in
Previous page
1/170
Next page
English
- 16 -
4. You will hear a confirmation tone: the settings of your phone are restored to their initial
values.
9.6.
Prefix ( Depending on Country)
If a PABX is used in a private network, you can program the outside call prefix.
This function sets:
- the PABX prefix number: this number will be added at the beginning of the
number you dialled.
- the number to be detected: if the number you dialled starts with the recorded
sequence, this sequence will be automatically deleted.
These two settings are not applied if number you dialled starts with "#" or "*".
1. Press
. Select "advanced set" using the or key, press .
2. Using the or key, select "auto prefix". Press
.
3. Select "detect digit" to define the number giving you access to the outside line.
4. Select "prefix" to specify the «digits before prefix».
5. Press
key to confirm your selection. You will hear a confirmation tone.
9.7.
Flash timing
If you connect your telephone to a private automatic branch exchange or use it in a foreign
country, you may need to modify the flash duration in order to use your telephone correctly with
regard to the following functionalities: outgoing 2nd call, incoming 2nd call, conference call.
Contact your administrator, who will supply the appropriate time period, and proceed to the new
settings.
1. Press
. Select "advanced set" using the or key, press .
2. Using the or key, select "recall time". Press
.
3. Three choices are available: " short ", " medium " and " long ".
4. Select the appropriate time period.
5. Press
key to confirm your selection. You will hear a confirmation tone.
9.8.
Modifying the dialing mode (Depending on Country)
Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling
mode. To select a dialling mode, follow this procedure:
1. Press
. Select "advanced set" using the or key, press .
2. Using the or key, select "dial mode". Press
.
Two modes are available: "tone" et "pulse".
Press
key to confirm your selection. You will hear a confirmation tone
9.9.
First ring
Activating this function is only useful if your line does not have the CLIP service.
This menu allows you to arrange your telephone to ring when a call is received even if it is
connected on the same line with another device (a fax, a cord telephone, etc.).
This function is activated by default. It will be automatically deactivated when a CLIP call is
received (the number of which will be displayed on the handset screen).
… 157 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem D16V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem D16V in the language / languages: English, German, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 6,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info