521549
151
Zoom out
Zoom in
Previous page
1/170
Next page
English
- 10 -
6. You will then enter the number screen. Enter the number of the entry. press to
confirm. You will hear a confirmation tone.
5.5.1. Calling an abbreviated number
To call the number you have assigned to one of the shortcut keys:
1. Hold down the key on which the number was programmed (1 or 2).
2. The number is displayed on the screen and is automatically dialled.
5.6.
Inserting a pause
You can insert a pause in the dialling sequence. Wait for a dial tone before you press .
The pause time is fixed to 3 seconds.
Press and hold
key during edit mode to inset the pause. The display shows an ’’P’’.
6. Using the Multi-Handset capabilities
These functions are used for handset management when two or more handsets are registered
on the same base.
6.1.
Intercom Call/Intercom
1. Make sure your handset is on standby mode.
2. Press the
key on the handset.
- If your installation has two handsets, the second handset is directly called, and "intercom"
followed by the handset number are displayed on the screen.
- The display shows the INT icon and the number of all registered handsets
- Enter the desired handset number or press the
key if you want to call all handsets. All
registered handsets are ringing.
3. On the called handset, press the
key to answer.
6.2.
Answering an internal call
1. The ring melody from an internal call is different from an external call. "intercom " and the
calling handset number appear on the screen. "
" is blinking.
2. Press the
key to answer. The " " stop blinking.
3. Ending an internal call press the
key.
6.3.
Call management
6.3.1. An external and an internal call
Transfering an external call to another handset registred on same base
1. During a call, press . The external user is put on hold.
2. Enter the internal call number. When the user answers, you can announce the call.
3. Press the
key to transfer the call.
Note!
To switch from one call to another, press and hold down the key until an aural
signal is heard.
Note!
If the called handset does not answer, press to take back the call.
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem D16V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem D16V in the language / languages: English, German, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 6,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info