33415
3
Zoom out
Zoom in
Previous page
1/16
Next page
ENGLISH
6
After accepting with the OK button, the automatic search begins and the channels
are identified and saved automatically. The most current channels are
automatically put in order according to the country that you chose.
You can also interrupt the search at any time by pressing the MENU button.
4. Description of the buttons and indicator lights
4.1. Buttons located within the righthand side door
AUTO TUNING
Searching
237
Channels found :
Frequency :
1
MENU key to stop searching
Validation button (in menus).
Programme change button.
P-
V-
OK
P+
V+
STBY
When the menu is called up, the buttons are used for moving within the screens.
and,,
On/off button.
Buttons for adjusting the volume.
5
2.5. Switching off your SAGEM AXIUM Home Cinema Screen
To put your SAGEM AXIUM™ Home Cinema Screen into standby mode, press the standby button on the
remote control or the standby button on the righthand side door.
You can cancel standby mode within 5 seconds (indicator light flashes green) by pressing the standby but-
ton again on the remote control or the righthand side door. After this time, standby mode cannot be stopped.
During the standby phase (approximately 1 minute), the indicator light on the front panel starts flashing orange.
The state of real standby is only effective when this indicator light changes to red.
In order to prolong the lamp's working life, do not interrupt the standby procedure,
NEVER switch off your appliance using the mains switch or disconnect the wall plug
unless the front panel LED is red.
If you want to switch on your television set again, wait at least 10 seconds before pres-
sing the switch on the left.
3. First Rapid Installation
Your SAGEM AXIUM™ Home Cinema Screen is not preset to receive the wireless channels for your region.
This rapid installation is automatically offered when you set up the appliance. It allows you to configure the basic
elements of your product (menu languages, country, and channel reception).
You can return to these settings at any time (see chapter 6).
Select the menu language using the buttons , validate using the OK
key.
Select the country where you are by using the buttons then validate
with the OK button.
and
and
COUNTRY
UK
PORTUGAL
GREECE
FRANCE
GERMANY
AUSTRIA
ITALY
SPAIN
OSD LANGUAGE
ENGLISH
ELLHNIKA
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
NEDERLANDS
PORTUGUES
Country Colour System Stereo
France SECAM L Nicam L
Germany PAL B, G Two B/G carriers
Austria PAL B, G Two B/G carriers
Italy PAL B, G Two B/G carriers
Spain PAL B, G Nicam B/G
Netherlands PAL B, G Two B/G carriers
Denmark PAL B, G Nicam B/G
Sweden PAL B, G Nicam B/G
Norway PAL B, G Nicam B/G
Finland PAL B, G Nicam B/G
Belgium PAL B, H Nicam B/G
Switzerland PAL B, G Two B/G carriers
UK PAL I Nicam I
Portugal PAL B, G
Greece PAL, SECAM B, G
Poland PAL D, K
Russia SECAM D, K
Czech Republic SECAM D, K
(*) For Australia, choose the Germany configuration.
Internal temperature light:
Red flashing or fixed: Excessive internal temperature.
Put you SAGEM AXIUM™ Home Cinema Screen into
standby and wait for the indicator light to go out.
On/standby light:
Red: standby
Flashing red: switch-on and standby phases
Flashing green: Phase during which the order to go
into standby can be cancelled. (see § 2.5)
Light out: Functioning.
Remote control receiver: the infra-red receiver is located in the bottom/righthand corner of your SAGEM AXIUM™ Home
Cinema Screen. All you have to do is aim at this spot with the remote control.
Lamp indicator:
Red flashing for 10s then going out: The lamp is
worn out; prepare a replacement.
Red flashing for 10s then remaining fixed (the
appliance going into standby): Change the lamp (see
chapter 14)
4.2. Front panel indicator lights and remote control receiver
Infra-red receiver:
Reception of the remote control
Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 5
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem AXIUM_HDD56B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem AXIUM_HDD56B in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagem AXIUM_HDD56B

Sagem AXIUM_HDD56B User Manual - German - 16 pages

Sagem AXIUM_HDD56B User Manual - Dutch - 16 pages

Sagem AXIUM_HDD56B User Manual - French - 16 pages

Sagem AXIUM_HDD56B User Manual - Italian - 16 pages

Sagem AXIUM_HDD56B User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info