Manual Sagem AXIUM_HDD45 (page 12 of 14) (English)

33407

Zoom out

Zoom in

1/14

ENGLISH

1. Precautions

1.1. Safety

Respect all maintenance advice, safety precautions and instructions recommended in this user booklet

are for your safety and to prolong the working life of the equipment.

• Definitions

Warning concerning user and equipment safety.

Warning about the risk of electric shocks.

Indicates a hot surface.

Warning about the danger of the lamp depreciation

• Safety regulations

This SAGEM AXIUM™ Home Cinema Screen is a class I appliance; it MUST be connected

to an electrical wall socket equipped with an earth

Your SAGEM AXIUM™ Home Cinema Screen is designed to function:

– with a 220-240 V~, 50-60 Hz, AC (alternating current) network;

– at an ambient temperature between +5°C and +35°C;

– in areas with humidity less than 85%.

(For more details, see chapter 16).

To avoid danger of overheating or electrocution:

– avoid direct exposure to sunlight and do not put naked flames or any other heat source

under the appliance;

– do not expose the appliance to water drips or splashes;

– do not place objects filled with liquid, such as flower vases, on the appliance;

– do not expose the appliance to very dusty environments;

– avoid shocks and vibrations.

You are recommended to disconnect the appliance from the power supply and the aerial:

– during thunder storms;

– when not used for long periods of time;

– when the appliance is malfunctioning (see chapter 13).

Before connecting or changing any connections to an audio-video/computer source (DVD

player, PC, etc.), disconnect the power cord from each appliance.

Make sure that ventilation grills are not obstructed by objects such as newspapers, table

cloths, curtains etc.

To avoid electric shocks, do not insert foreign bodies, such as needles or coins into the

ventilation grills.

Leave a gap of at least 10 cm around the appliance to allow sufficient ventilation.

Before disconnecting the power lead, you are recommended to let the cooling fans of your

SAGEM AXIUM™ Home Cinema Screen work for a few minutes. This will increase its working

life.

TABLE OF CONTENTS

1. Precautions 2

1.1. Safety 2

1.2. Maintenance 3

2. Set Up 4

2.1. Fitting the speaker columns (optional) 4

2.2. Aerial connection 4

2.3. Mains connection 5

2.4. Switch on 5

2.5. Switching off your SAGEM AXIUM™ Home Cinema Screen 5

3. First Rapid Installation 6

4. Description of the buttons and indicator lights 6

4.1. Buttons the right side door 6

4.2. Front panel indicator lights and remote control receiver 7

5. Remote Control 7

6. Personalised settings 8

6.1. Changing the security code 8

6.2. Return to initial configuration 8

6.3. Searching TV programmes 8

6.3.1. Choice of country 8

6.3.2. Manual installation 9

6.3.3. Automatic installation 9

6.3.4. Modifying the programme list 9

6.4. Choose the MENU language 10

6.5. Setting for the economy mode 10

6.6. Setting for the SPDIF output 10

6.7. Adjusting the headphones output 11

6.8. Setting the speaker mode 11

6.9. Adjusting the Hi-Fi output 11

6.10. Exit stanby mode tuning 11

7. Connecting equipment and configurations 12

7.1. Connection advice 12

7.2. Source configuration 13

7.3. Configuration of computer sources 14

8. Day-to-day use 14

8.1. Picture adjustment 14

8.2. Sound adjustment 15

8.3. Sleep timer 16

8.4. Choice of sources 16

8.5. Choice of format 16

8.6. Programme information 17

8.7. Double picture mode selection 17

8.8. Choosing a TV programme 17

8.9. Picture hold 17

9. Teletext 18

10. NexTView EPG 19

10.1. Installation 19

10.2. Navigation 19

11. Compatibility with High Definition Television 20

12. HDCP 20

13. Diagnosing Trouble Shooting 21

14. Changing the lamp unit 22

15. Index 23

16. Technical characteristics 24

16.1. Overall view 25

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 1

2. Set Up

2.1. Fitting the speaker columns (optional)

Take the speaker columns out of their packaging. Put the first speaker column beside the screen making the fixing

holes coincide with those of the frame. Using the screw supplied and a screwdriver, fix the two lugs of the column

against the frame. Do the same for the second speaker column.

Connect each column to your SAGEM AXIUM™ Home Cinema Screen with the audio cables supplied. To hide

the cables, start from the black and red terminals on the back of the column pushing the wires into the groove.

Then continue like this up to the terminals of the television set. Do the same for the second speaker column.

You have the possibility of connecting your own speakers to your SAGEM AXIUM™ Home Cinema Screen if these

have impedance greater than or equal to 8 ohms. To do this, disconnect the speaker columns, connect your

speakers instead, pass the wires in the grooves provided and deactivate the subwoofer (see §8.2).

2.2. Aerial connection

Insert the end of the coaxial cable leading from your aerial into the aerial input socket at the back of your SAGEM

AXIUM™ Home Cinema Screen.

Your SAGEM AXIUM™ Home Cinema Screen is fitted with 2 tuners, but only one cable is needed to supply both.

AV3

AV2

AV1

SPDIF

AV4AV5

PC2 IN

ANT

HI-FI

OUT

DVI-D

INTERLACED

PROGRESSIVE

SERVICE

1.2. Maintenance

• Before doing anything, disconnect the mains lead from the wall socket.

• Clean the cabinet using a soft, slightly damp cloth and a non-abrasive and non-wax detergent.

• Clean the screen carefully using a soft, damp cloth lightly impregnated with a soap solution.

• Never use benzene, alcohol or petroleum-based cleaning products as these could damage the finish and the

screen.

Your SAGEM AXIUM™ Home Cinema Screen utilises high voltage. Never attempt to access

the interior of the apparatus, except when you are changing the lamp unit.

Do not open or dismantle this product as this will expose you to the risk of electrocution.

This appliance will auto-detect the end of the lamp's working life. Replace the lamp as soon as

the bulb indicator lights up on the front panel.

When the SAGEM AXIUM™ Home Cinema Screen lamp reaches the end of its working life,

there could be a loud, sharp sound when it stops working. The appliance will only work when

you replace the bulb.

To avoid burns or the lamp unit damage whilst it is being replaced, you must disconnect the

mains lead from the wall socket.

Wait at least one hour before starting to change the lamp unit.

Make sure that you follow the whole replacement procedure described in "Changing

the lamp unit" on page 22.

Only use suitable batteries that comply with the maker's specifications (see chapter 16).

– the batteries supplied are not rechargeable;

– pay particular attention to environmental matters;

– take the defective or used batteries to the places provided for this effect in accordance with

current regulations; never throw them in the dustbin.

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 3

ENGLISH

3. First Rapid Installation

Your SAGEM AXIUM™ Home Cinema Screen is not preset to receive the wireless channels for your region.

This rapid installation is automatically offered when you set up the appliance. It allows you to configure the basic

elements of your product (menu languages, country, and channel reception).

You can return to these settings at any time (see chapter 6).

Select the menu language using the buttons , validate using the OK

key.

Select the country where you are by using the buttons then validate

with the OK button.

COUNTRY

PORTUGAL

GREECE

FRANCE

GERMANY

AUSTRIA

ITALY

SPAIN

OSD LANGUAGE

ENGLISH

ELLHNIKA

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

NEDERLANDS

PORTUGUES

and

Country Colour System Stereo

France SECAM L Nicam L

Germany PAL B, G Two B/G carriers

Austria PAL B, G Two B/G carriers

Italy PAL B, G Two B/G carriers

Spain PAL B, G Nicam B/G

Netherlands PAL B, G Two B/G carriers

Denmark PAL B, G Nicam B/G

Sweden PAL B, G Nicam B/G

Norway PAL B, G Nicam B/G

Finland PAL B, G Nicam B/G

Belgium PAL B, H Nicam B/G

Switzerland PAL B, G Two B/G carriers

UK PAL I Nicam I

Portugal PAL B, G

Greece PAL, SECAM B, G

After accepting with the OK button, the automatic search begins and the channels

are identified and saved automatically. The most current channels are

automatically put in order according to the country that you chose.

You can also interrupt the search at any time by pressing the MENU button.

4. Description of the buttons and indicator lights

4.1. Buttons the right side door

AUTO TUNING

Searching

237

Channels found :

Frequency :

MENU key to stop searching

Validation button (in menus).

Programme change button.

P-

V-

P+

V+

STBY

When the menu is called up, the buttons are used for moving within the screens.

On/off button.

Buttons for adjusting the volume.

and

and,,

2.3. Mains connection

Insert the mains plug into a 220-240V~ 50-60H zelectrical wall socket.

2.4. Switch on

2.5. Switching off your SAGEM AXIUM™ Home Cinema Screen

To put your SAGEM AXIUM™ Home Cinema Screen into standby, press the standby button on the remote control

or the standby button on the right side door.

You can cancel standby mode within 5 seconds (indicator light flashes green) by pressing the standby button

again on the remote control or the right side door. After this time, standby mode cannot be stopped.

During the standby phase (approximately 1 minute), the indicator light on the front panel starts flashing orange.

The state of real standby is only effective when this indicator light changes to red.

In order to prolong the lamp's working life, do not interrupt the standby procedure,

NEVER switch off your appliance using the mains switch or disconnect the wall plug

unless the front panel LED is red.

If you want to switch on your television set again, wait at least 10 seconds before pres-

sing the switch on the left.

Switch the appliance on by pressing the ON/OFF switch on the left of your appliance

(See § 16.1).

Setting up your remote control:

Open the battery compartment cover and insert the two R6-1.5V type batteries.

Make sure that the batteries are installed correctly.

Do not use batteries of different types or rechargeable batteries.

Switching on your SAGEM AXIUM™ Home Cinema Screen:

Press the standby button on the remote control or right side door.

NB: The on/off indicator light located on the front panel of your SAGEM AXIUM™ Home Cinema Screen

flashes orange whilst the lamp is warming up, then goes out when the lamp is functioning.

When you set up your SAGEM AXIUM™ Home Cinema Screen for the first time, you can take advantage of a

rapid installation procedure after this warm-up phase (see chapter 3).

Connecting other audio/video or computer appliances is covered in chapter 7. Before looking at this, proceed to

the rapid installation.

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 5

6. Personalised settings

6.1. Changing the security code

All installation screens can be protected by a personal code.The

default code is 0000. This does not lock the installation screens.

Press the MENU button, then choose "INSTALL" with the button

then validate with the OK button.

Choose "PROTECTION" then "CHANGE CODE", validate with the

OK button.

Enter your new code then confirm the same code in the confirmation

screen accepting each time with the OK button. You can cancel

change of code at any time using the MENU button.

It is possible to extend protection to the whole television set. To do

this, select "GL LOCK" and choose "YES" with the button . You

will then be asked for your personal code each time you switch on

your SAGEM AXIUM™ Home Cinema Screen.

NB: To lock these screens, enter a different code than 0000.

Always remember your new code.

Enter 0000 to unlock.

6.2. Return to initial configuration

If necessary, you can automatically configure your SAGEM

AXIUM™ Home Cinema Screen to the original settings. In this

instance, all your personal settings will be lost (list of channels,

country, languages…).

Press the MENU button, then choose "INSTALL" using the button

and validate with OK button.

Enter your personal code then validate using the OK button (no

code is requested for the initial 0000 code).

Select "FACT. RESET" and validate with the OK button.

A confirmation screen will invite you to continue by pressing the

OK button or cancel with the BACK button.

6.3. Searching TV programmes

The programmes are installed at the initial set-up. Nevertheless, the following functions are useful if you relocate

to another region.

6.3.1. Choice of country

The choice of country allows the television set to automatically

classify the channels during the automatic search.

Press the MENU key.

Select the "INSTALL" chapter using OK button.

Select the "CHANNEL MAN." chapter using OK button.

Select the "COUNTRY" chapter using OK button.

Select the chosen country using buttons .

Your selection will be saved when you exit this menu using the

BACK button.

SOURCES

DONNEES PC

RECHERCHE

MODIF. CODE

CONFIG. USINE

MODIF. CODE

CONFIG. USINE

CODE

- - - -

ERROU

CHAINE

GL LOCK

CHANGE CODE

FACT. RESET

YES

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

EPG

AUDIO INSTALL.

PROTECTION

SOURCES

DONNEES PC

RECHERCH

MODIF. CODE

CONFIG. USINE

MODIF. CODE

CONFIG. USINE

CODE

VERROU

CHAINE

GL LOCK

CHANGE CODE

FACT. RESET

YES

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

WARNING

Previous setting will be lost

the TV set will shutdown

BACK key to cancel

EPG

CONTINUE

AUDIO INSTALL.

AUTO SCAN

LIST EDITION

COUNTRY

MAN. SEARCH

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

EPG

PORTUGAL

GREECE

FRANCE

GERMANY

AUSTRIA

ITALY

SPAIN

AUDIO INSTALL.

and

SOURCES

DONNEES PC

RECHERCHE

MODIF. CODE

CONFIG. USINE

MODIF. CODE

CONFIG. USINE

CODE

- - - -

ERROU

CHAINE

GL LOCK

CHANGE CODE

FACT. RESET

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

ENTER

- - - -

CONFIRM

- - - -

EPG

AUDIO INSTALL.

Internal temperature light:

Flashing red: Excessive internal temperature

Put you SAGEM AXIUM™ Home Cinema Screen into

standby and wait for the indicator light to go out.

On/standby light:

Red: standby

Flashing red: switch-on and standby phases

Flashing green: Phase during which the order to go

into standby can be cancelled. (see § 2.5)

Light out: Functioning.

Remote control receiver: Your SAGEM AXIUM™ Home Cinema Screen is equipped with an innovative remote control

reception system giving a very wide target field. In fact, the whole surface of the screen is sensitive to the remote control

signals. All you have to do is aim at the screen from wherever you are situated.

5. Remote Control

Colour buttons:

Used in configuration menus,

teletext and NexTView programme

guide

Pause: Picture or teletext page

frozen

Back: Return to the previous

channel or teletext page.

Choice of picture format

Menu: Access to the menus of

configuration and to the comple-

mentary Teletext functions

PIP/PAP functions

- Call up and choice of function

- Screen selection

- Source exchange

Decrease audio volume

Teletext on/mode

Transparent/stop

Teletext index

Navigator: For moving in the menus

and OK to accept or move the PIP

window

On-screen information and TOP

Teletext

NexTView programme guide

Choice of picture source

Choice of sound (mono or stereo)

or language (see § 8.2)

Mute

Increase audio volume

Programme selection

Teletext - hidden text

Teletext fast mode

Numeric buttons

Lamp indicator:

Flashing red: The lamp is worn out; prepare a replace-

ment

Fixed red: Change the lamp (see chapter 14)

4.2. Front panel indicator lights and remote control receiver

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 7

ENGLISH

• Change the programme name

Go to the line of the programme name to be modified and press the yellow button to accept it.

Enter the first characters. Move through the characters using the buttons .

Move forward by one character with the button then enter the second. Continue in the same way for the

other characters (maximum of 6 characters). Finally, accept with the yellow button.

• Apply noise reduction filter to a programme

To get the best out of your SAGEM AXIUM™ Home Cinema Screen, a noise reduction filter can be applied

to the channels if the quality of reception is poor.

Go to the line of the programme name to be modified and press the blue button. Each pressure on the blue

button applies the next filter. Apply a weak "1", medium "2", or strong "3" filter according to your reception.

Select "0" if no filter is necessary.

NB: You can display the selected screen at any time by pressing the OK button.

Press the MENU button to exit.

6.4. Choose the MENU language

You can select the menu and information display language.

Press the MENU button.

Select the "OPTIONS" chapter using the OK button.

Select the "OSD LANGUAGE" chapter using the OK button.

Select the chosen language using the buttons .

Press the MENU button to exit or the BACK button to return to the

previous screen.

6.5. Setting for the economy mode

You can decrease the power of the lamp to increase its working

life and reduce its power consumption. This mode is particularly

recommended if you watch your SAGEM AXIUM™ Home

Cinema Screen in a dark room.

Press the MENU button.

Select "OPTIONS" with the OK button.

Go to "ECO MODE" and choose the mode with buttons .

Press the MENU button to exit.

6.6. Setting for the SPDIF output

If you have a Home Cinema installation without the capability of

adjusting the synchronization of the audio on the video, you can

use your SAGEM AXIUM™ Home Cinema Screen as

synchronization generator. By using the SPDIF input and output

available on the back panel, the sound of your Home Cinema will

be perfectly synchronized with the picture displayed. To use this

function, you just have to state in this menu the source that you

wish to synchronize.

Press the MENU button.

Select "OPTIONS" with the OK button.

Go to "SPDIF SOURCE" and choose the video source with

the buttons .

Press the MENU button to exit.

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

PORTUGUES

IMAGE OPTIONS

SLEEP TIMER

HEADPHONES

LOUDSPEAKER

HIFI VOLUME

SPDIF SOURCE

OFF

MAIN

STEREO

FIXED

ENGLISH

OFF

OSD LANGUAGE

ECO MODE

AUDIO INSTALL.

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

PORTUGUES

IMAGE OPTIONS

SLEEP TIMER

HEADPHONES

LOUDSPEAKER

HIFI VOLUME

SPDIF SOURCE

OFF

MAIN

STEREO

FIXED

ENGLISH

OFF

YES

OSD LANGUAGE

ECO MODE

AUDIO INSTALL.

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

PORTUGUES

IMAGE OPTIONS

SLEEP TIMER

HEADPHONES

LOUDSPEAKER

HIFI VOLUME

SPDIF SOURCE

OFF

MAIN

STEREO

FIXED

ENGLISH

AV5

YES

OSD LANGUAGE

ECO MODE

AUDIO INSTALL.

and

6.3.2. Manual installation

Select "MANUAL" then validate using OK button.

A search screen is then displayed allowing you to check the

programme found.

Television programmes are searched and saved channel by

channel.

Select "CHANNEL MAN". and start the search using .

When a picture is displayed on the screen,

Restart this manual procedure for all the programmes you wish to

memorise.

Press on the MENU button to exit.

6.3.3. Automatic installation

Select "AUTO SCAN" and validate using OK button.

Your previous search will be erased and replaced by the new one,

confirm by pressing OK button.

All channels are searched and saved automatically.

If the broadcast signal is recognised by the transmission of a

teletext page, the channels will be automatically named and

classified.

You can decide to stop the search at any point in time, by using the

MENU button.

6.3.4. Modifying the programme list

You can modify the programme list that is a result of your search at

any time.

Press the MENU button.

Select the "INSTALL" menu then "CHANNEL MAN" and finally

"LIST EDITION" with the OK button.

• You can decide to save your channel selection:

Go to the "PROGR. NUMBER" No line and enter the position of

the desired programme using 0 to 9 buttons.

Move the cursor to "MEMO" and validate using OK button.

• You can try to obtain a better quality picture:

Go to the "FINE TUNING" line and adjust the cursor

using the buttons .

Move the cursor to "MEMO" and validate using OK button.

• You can decide not to save this channel selection:

In this instance, restart the search.

From this screen, you can:

• Delete a programme

Go to the line of the programme to be deleted and press the red

button.

• Move a programme

Go to the line of the programme to be moved and press the

green button to select it (a ">" appears to the left of the

programme). Move it with buttons , then accept its

new position with the green button.

and

ATTENTION

la configuration sera perdue

CONTINUER

Touche BACK pour annuler

PROTECTION

SOURCES

DONNEES PC

RECHERCHE

MODIF. CODE

CONFIG. USINE

VERROU

CHAINE

CODEGENERAL NON

AUTO SCAN

LIST EDITION

COUNTRY

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

EPG

MAN. SEARCH

AUDIO INSTALL.

FINE TUNING

PROGR. NUMBER

FREQUENCY

MANUAL SEARCH

MEMO

MENU key to stop searching

ATTENTION

la configuration sera perdue

CONTINUER

Touche BACK pour annuler

PROTECTION

SOURCES

DONNEES PC

RECHERCHE

MODIF. CODE

CONFIG. USINE

VERROU

CHAINE

CODEGENERAL NON

AUTO SCAN

LIST EDITION

COUNTRY

MAN. SEARCH

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

EPG

WARNING

previous settings will be lost

CONTINUE

AUDIO INSTALL.

ATTENTION

PROTECTION VERROU

CODEGENERAL NON

AUTO SCAN

LIST EDITION

COUNTRY

MAN. SEARCH

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

EPG

AUDIO INSTALL.

PROG.

DELETE

LIST EDITION

FREQ.

MOVE

NAME

N.R.

VIEW

479,50

599,25

671,25

735,25

TF1

C+

527,25

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 9

7. Connecting equipment and configurations

7.1. Connection advice

Your SAGEM AXIUM™ Home Cinema Screen offers you a large selection of connectors to attach the equipment

of your choice.You are advised to carry out the connections when the appliances are switched off.

REAR PANEL

AV1 recommended for a DVD player, a DVDR player/recorder, a digital decoder (cable,

satellite or wireless).

AV2 Recommended for an analog decoder, or a digital decoder (cable, satellite or wireless).

AV2 recommended for a VHS or SVHS video player.

AV4 recommended for a games console.

AV5 Recommended for a DVD player provided with Y Pb Pr outputs. This type of connection

automatically detects "interlaced" or "progressive" mode.

Hifi This output can be connected to any audio system equipped with its own speakers such as a

high-fidelity system. For better comfort of listening to your audio system, cut the sound of your

SAGEM AXIUM™ Home Cinema Screen (see § 6.8). The DLP™ technology causes a slight

delay in picture processing, so connect your amplifier to these sockets and not to those of the

source (see § 6.9)

PC2 IN Recommended for connecting a PC or a DVD player equipped with "DVI D" socket. Only use a

"DVI D" cable (graphics card).

SPDIF IN The DLP™ technology causes a slight delay in picture processing. To synchronize the sound

with your SAGEM AXIUM™ Home Cinema Screen, connect the digital audio output of your

DVD player to this output and recover the synchronized signal on SPDIF OUT.

SPDIF OUT This output allows you to recover the signal sent to SPDIF IN after digital synchronization with

the picture. Connect this output to the digital audio input of your Home Cinema audio amplifier.

VHS

DIGITAL RECORDER

DVD

DIGITAL RECORDER

HOME CINEMA

AMPLIFIER

HI-FI SYSTEME

DVD

C+ DECODEUR

VIDEO RECORDER

Games

Console

DVD

DVI D

AV3

AV2

AV1

SPDIF

AV4AV5

PC2 IN

ANT

HI-FI

OUT

DVI-D

INTERLACED

PROGRESSIVE

SERVICE

6.7. Adjusting the headphones output

You can choose the audio source of the headphones output

Press the MENU button.

Select "OPTIONS" with the OK button.

Go to "HEADPHONES" and choose the video source with the

buttons .

"MAIN" will restore the sound of the full screen picture in PIP mode

or the right-hand picture in PAP mode to the headphones.

"PIP/PAP" will restore the sound of the inset picture in PIP mode

or the left-hand picture in PAP mode to the headphones.

NB: The PIP and PAP functions are described in § 8.7.

Press the MENU button to exit.

6.8. Setting the speaker mode

You can choose between mono and stereo or deactivate the

sound from the columns to get the most out of your personal

audio system (such as high-fidelity system or Home Cinema

audio amplifier).

Press the MENU button.

Select "OPTIONS" with the OK button.

Go to "LOUDSPEAKER" and choose the mode with the but-

tons .

Press the MENU button to exit.

6.9. Adjusting the Hi-Fi output

You can choose between two ways of adjusting the volume of this

output:

"FIXED": The volume must be adjusted on the audio system

connected to the Hi-Fi output.

"ADJUSTABLE": The volume of the audio system connected to the

Hi-Fi output can be adjusted from the remote control using the

buttons + and -.

Press the MENU button.

Select "OPTIONS" with the OK button.

Go to "HI-FI VOLUME" and choose the mode with the but-

tons .

Press the MENU button to exit.

6.10. Exit stanby mode tuning

This setting allows you to choose active mode or go to standby

mode.

"MANUAL": Exit from standby and go to standby mode by pressing

the standby button on the remote control or right side door.

"AUTO": Exit from standby or go to automatic standby controlled

by the equipment plugged into "SCART" connectors on the rear

panel. In this mode, new sources detected by the television set will

be automatically displayed (except for the PC1 input).

Press the MENU button to exit.

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

PORTUGUES

IMAGE OPTIONS

SLEEP TIMER

HEADPHONES

LOUDSPEAKER

HIFI VOLUME

SPDIF SOURCE

OFF

PIP/PAP

STEREO

FIXED

ENGLISH

AV5

YES

OSD LANGUAGE

ECO MODE

AUDIO INSTALL.

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

PORTUGUES

IMAGE OPTIONS

SLEEP TIMER

HEADPHONES

LOUDSPEAKER

HIFI VOLUME

SPDIF SOURCE

OFF

PIP/PAP

STEREO

FIXED

ENGLISH

AV5

YES

OSD LANGUAGE

ECO MODE

AUDIO INSTALL.

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

PORTUGUES

IMAGE OPTIONS

SLEEP TIMER

HEADPHONES

LOUDSPEAKER

HIFI VOLUME

SPDIF SOURCE

OFF

PIP/PAP

STEREO

AJUSTABLE

ENGLISH

AV5

YES

OSD LANGUAGE

ECO MODE

AUDIO INSTALL.

and

CODE

CONFIG

MANAGER

AUTO

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

EPG

AUDIO INSTALL.

and

• Press the MENU button then go into "INSTALL".

• Select "SOURCES" then "MANAGER"

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 11

ENGLISH

7.3.Configuration of computer sources

If a personal computer is used (PC or MAC), switch on your SAGEM

AXIUM™ Home Cinema Screen before the computer.

Press the MENU button, then choose "INSTALL" using the button

and validate with OK.

Choose "PC DATA" then validate with OK.

With this option, you can adjust the source coming from your PC in

VGA mode (PC1) or DVI (PC2). In DVI, only the horizontal and

vertical positions can be adjusted.

Horizontal position: press to move the picture to the left and

to move it to the right.

Vertical position: Press to move the picture to the top or

bottom.

Frequency: This allows you to adjust the frequency to that of your

computer's graphics card. When a flashing vertical bar appears,

use this function to adjust the frequency.

Phase: This allows finer synchronization with your computer's gra-

phics card. Use this tuning when an unstable or flashing picture

occurs.

Automatic mode: This allows you to adjust everything automatically

or not.

Resolutions accepted (DVI-D and VGA entries): To ensure that

the projection display is operating correctly with your computer

make sure that you configure the display mode of your graphics

card to a resolution lower than 1024 x 768.

NB: Optimum stability is achieved with a frequency of 60 Hz (consult the documentation for your PC to

configure it).

8. Day-to-day use

8.1. Picture adjustment

PERSONAL PICTURE TUNING

You can set and save your own parameters using the "USER"

mode.

CONTRAST, BRIGHTNESS, COLOUR, SHARPNESS, TINT

be adjusted according to your preferences using the

buttons .

The tone adjustment only applies to an NTSC video source.

The colour balance adjustment allows you to set the main picture

colour.

Adjust using .

PRESET PICTURE SETTINGS

You can choose your picture preference from the settings offered

using the buttons STANDARD CINEMA STUDIO

SPORT

Select the most suitable one for the programme you are viewing

and validate using the OK button.

Press the MENU button to exit and the BACK button to return to

the previous screen.

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

CHANNEL MAN.

EPG

HORIZONTAL

VERTICAL

FREQUENCY

PHASE

AUTO IMAGE

YES

PC DATA

AUDIO INSTALL.

Resolution (px) Frequency (Hz)

640 x 480 60

640 x 480 66

640 x 480 72

640 x 480 75

640 x 480 85

800 x 600 60

800 x 600 72

800 x 600 75

800 x 600 85

1024 x 768 60

1024 x 768 70

1024 x 768 75

1152 x 864 60

1152 x 864 70

1280 x 720 60

and

IMAGE OPTIONS

USER STANDARD CINEMA STUDIO SPORT

CONTRAST 50

TINT 50

NEUTRAL

BRIGHTNESS 50

COLOR 50

SHARPNESS 0

COLOR TEMP.

AUDIO INSTALL.

IMAGE OPTIONS

USER STANDARD

CINEMA

STUDIO

SPORT

AUDIO INSTALL.

and

RIGHT SIDE DOOR

7.2. Source configuration

Press the MENU key then select "INSTALL" using the button

and validate using OK.

If your code is not 0000, this screen is protected and you must

enter your code.

Select "SOURCES", then "CONFIG" and accept with OK.

This option allows you to select the sources used but only displays

them when you select sources in daily use.

Choose the connector to be configured ( / ).

Press the MENU button to exit.

VGA

OK STBY

V- V+

P- P+

AUDIO

CODE

CONFIG

MANAGER

AUTO

IMAGE OPTIONS

CODE

PROTECTION

SOURCES

PC DATA

CHANNEL MAN.

EPG

AUDIO INSTALL.

For each connector, you can:

• Validate connected equipment

Press the red key several times until "YES" (or "NO" for an unu-

sed connector) is displayed. Select "C+" if you have connected

your C+ decoder to SCART 2. In this instance, enter the C+ pro-

gramme number at once.

• Choosing a pre-programmed name

Press the green button several times (DVD, DVDR, C+, DEC,

MAG, GAMES).

• Choosing a personalized name

Press the yellow button to move to edit mode. Scroll through the

characters using the buttons . Go to the next character

us in g . Finally, press the yellow button to validate.

• Choosing a noise reducer

You can apply a noise reducer to some sources such as a video

player by scrolling through them by pressing the blue button

more than once (none "0", weak "1", medium "2", strong "3").

NB: You can display the selected channel at any

time by pressing the OK button.

INPUT

SCART 1

SCART 2

SCART 3

AV 4

AV 5

AV 6

PC 1

PC 2

SOURCE

YES

CHOOSE NAME

NAME

- - - - -

- -

- - - - - -

N°

N.R.

NAME N.R.

VIEW

HEADPHONES recommended for headphones.

Adjusting the headphones is covered in § 6.7.

PC1 IN recommended for the connection of a PC fitted

with a "VGA"

socket.A 3.5 mm audio jack socket allows you

to connect sound.

AV6 recommended when connecting a camcorder in

VHS, S-VHS, 8 mm, Hi-8 or digital DVC format.

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 13

8.3. Sleep timer

This option allows you to programme a period of time after which

the television set will go to standby automatically.

Press the MENU button then choose "OPTIONS" using the button

and validate using OK.

Select "SLEEP TIMER" then choose the duration with the but-

tons .

You can set the sleep time at 15 min intervals up to a maximum of

180 min.

One minute before entering standby mode, the last minute counter

will appear on the screen. This screen allows you to cancel the

sleep timer, if you want to.

You can always stop the SAGEM AXIUM™ Home Cinema Screen

before the programmed stop time or reprogram the stop time.

8.4. Choice of sources

8.5. Choice of format

A simple access to this choice is by using the direct access

button .

This function allows you to display the picture at the maximum size,

including wide screen pictures.

Press the button of remote control.

Nb: At first press, the info banner displays the current status

without any change of format.

4:3 FORMAT

Displays a 4:3 picture in its original format.

ENLARGED FORMAT

This format allows you to watch 4:3 pictures at the maximum size by horizontally stretching the left and right edges

of the picture. (The central part is not deformed).

14:9 FORMAT

This format allows you to watch programmes in 14:9 format. Manually, this format is recommended for films in

1.66 cinema format

FORMAT 16:9

This format allows you to automatically watch programmes in 16:9 format using the 16/9 signals coming to the

SCART.

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

PORTUGUES

IMAGE OPTIONS

SLEEP TIMER

HEADPHONES

LOUDSPEAKER

HIFI VOLUME

SPDIF SOURCE

PIP/PAP

STEREO

AJUSTABLE

ENGLISH

AV5

YES

OSD LANGUAGE

ECO MODE

AUDIO INSTALL.

You can select sources in two different ways:

NB: A channel is valid if it has been found during the automatic search or if it has been saved during the manual

search.

NB: If you previously configured and named your equipment inputs in paragraph 7.2, you will only be offered

the sources connected and configured.

To return to the channels, press the BACK button, on a digital button or on a P+/P- button.

If you connect a video source, the television set will automatically display this source.

• By using the direct access button on the remote control.

Select the chosen source by pressing again until the correct source is obtained.

• With the P+/ P- buttons on the right side door. Navigate through the valid wireless channels then the external

sources (scart 1, scart 2, scart 3, av4, av5, av6, pc1, pc2).

SCART 1

CINEMA

and

8.2. Sound adjustment

ADJUSTMENTS POSSIBLE BY REMOTE CONTROL

Volume: Press + or - to adjust the volume.

Mute: Press to mute or to switch on the sound.

Bilingual broadcast or sound selection: Press to choose

between MONO or STEREO sound if the channel transmits sound

in NICAM stereo mode. Choose between DUAL A and DUAL B if

there is a bilingual broadcast.

This adjustment is saved per channel.

PERSONAL SOUND SETTINGS

You can set and save your own sound balance using the "PERSO"

mode.

Press the MENU button then go to "AUDIO".

Choose "PERSO" with buttons .

Move through the various frequency bands with the buttons

then adjust the desired level using the buttons .

The level displayed under the bar is in audio decibels (dBA).

PRESET SOUND BALANCE

You can choose a sound balance from among the preset parame-

ters using the buttons STANDARD, VOICE, MUSIC or

FILM.

Choose the setting that best suits the programme you are watching

and validate with the OK button.

ADVANCED SOUND SETTINGS

To adjust the other audio parameters, go to "NEXT".

DYNAMIC BASS Allows you to accentuate the low frequencies or not.

LOUDNESS Allows you to automatically balance the sound at low volume.

SMART VOL Allows you to adjust the sound control mode.

In NORMAL mode, your SAGEM AXIUM™ Home Cinema Screen will adjust the

speaker level to avoid too great a difference of volume between two programmes

particularly during advertising breaks.

In NIGHT mode, this attenuation is stronger and reacts more quickly to variations in volume.

DOLBY VIRTUAL Allows you to activate Virtual Dolby Surround or not.

INTERNAL SW Allows you to activate the woofer of your SAGEM AXIUM™ Home Cinema Screen or

not.

BALANCE Move the cursor with the buttons to balance sound between the left and

right speakers.

HEADPHONES VOL Allows you to adjust the headphones volume output on the right side door.

and

NB: Virtual Dolby Surround is a technology coming from Dolby Laboratories. It creates

a virtual background soundscape through two speakers using the Dolby Pro Logic.

Virtual Dolby Surround takes audio information from all the original channels and gives

the listener the sensation of being surrounded by additional speakers.

IMAGE OPTIONS

PERSO

AUDIO INSTALL.

5 2 5 2 5

100Hz 100Hz

IMAGE OPTIONS

DYNAMIC BASS

LOUDNESS

DOLBY VIRTUAL

BALANCE

INTERNAL SW

SMART VOL.

HEADPH. VOL.

YES

AUDIO INSTALL.

Press the MENU button to exit and the BACK button to return to the previous screen.

and

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 15

ENGLISH

9. Teletext

Teletext functions vary according to television companies and are only available if the selected channel transmits

teletext.

• Teletext display

Press the button to switch on teletext without video.

Pressing the button again allows you to view teletext imposed on the current video.

You can exit from Teletext mode by pressing again.

If there is no teletext on the channel you are watching, a message will inform you of this.

• Selecting the index page

Teletext pages include an introduction page (usually page 100) telling you how to use the service.

The button allows you to select this introduction page directly.

• LIST or FASTEXT mode

There are two teletext modes:

- LIST mode: in this mode, four pages numbers appear at the bottom of the screen, each in a different colour.

Each of these numbers can be changed and saved in the memory.

- FASTEXT mode: in this mode, four subjects appear at the bottom of the screen, each in a different colour.

To obtain more information on one of these subjects press the corresponding coloured button.

- This function allows you to obtain information on the displayed subjects quickly.

The required mode is selected by pressing the button .

• Selecting a page

Enter the number of the required page using the 0-9 buttons (There are no pages starting with a 0 or 9.).

The page counter at the top of the screen searches for the page or the page appears immediately, if the page

number has already been saved.

If the page does not exist, a message appears to tell you that you have entered a non-existent number.

You can quickly scroll through teletext pages by using the P+ P- or buttons (by skipping non-existent

pages).

To save another page in this mode, press the relevant coloured button and enter the page number.

When in FASTEXT mode, you can select a chosen subject using the colour buttons corresponding to the

options at the bottom of the screen.

• Displaying hidden information

Press the button to call up and delete hidden information, such as puzzle solutions and replies to

questions.

• Holding a page

Press the button to hold a text page, whilst looking at information that is on several pages. Press again to

return to automatic update.

• Expand

Press the MENU button then the green button. Pressing it more than once allows you to display the top half,

the bottom half and then return to normal format.

• Navigation within sub-pages

When the selected pages contain one or more sub-pages, a help line listing the sub-pages appears at the

bottom of the screen.

Use the buttons to choose the next or the previous sub-page.

• Subtitles

TV channels with teletext often transmit certain programmes with subtitles.

Press the button and select the relevant subtitle page.

The subtitle page continuously appears on the screen if the current programme is transmitted with subtitles.

CINEMA FORMAT

This format allows you to watch films in 1.85 (ACADEMY FLAT) format, broadcast in 4:3 in maximum screen

format without distortion with black bands at the top and bottom.

It allows you to watch films in 2.0, 2.20, and 2.35 format.

SUBTITLE FORMAT

This format allows you to watch films in 1:85 (ACADEMY FLAT) format broadcast in 4:3 at maximum screen

format without picture loss and without distortion by moving the picture to the top to enable any subtitles to be

read.

SCOPE FORMAT

This format allows you to watch films in 2.35 (PANAVISION) format, broadcast in 4:3 in maximum screen format-

without distortion, at maximum height but with picture loss at the right and left edges.

NATIVE FORMAT

This format allows you to watch the picture as it really is, with no resizing.

8.6. Programme information

Press the button at any time to obtain information on the TV

channel.

When you are watching an external video source, the name of the

source will be displayed.

8.7. Double picture mode selection

Switching on double picture mode

Choose the video insert mode (PIP) or two videos side-by-side (PAP)

by pressing the button more than once.

When one of the two Modes - (PIP or PAP) is in use, you can:

Invert the sources by pressing the button .

Change source on the screen by pressing the button

to name the source to be changed; then

Change the format on the screen by pressing the button

to name the source to be changed; then

The buttons change the position of the pip window if the

pip mode is activated. You can navigate through 4 possible

positions in the order top-left, top-right, bottom-left, bottom-right.

8.8. Choosing a TV programme

Use the 0/9 buttons to choose your channel. For a two-digit number, enter the second within 2 seconds.

Use the BACK button to return to the channel previously watched. BACK also allows you to return from an exter-

nal video source to the TV channels.

8.9. Picture hold

Use the pause button to freeze the picture or reactivate it.

• Pr+ or Pr- to change the wireless channel,

• to change the source.

• to change the format.

[2] BBC

MONO 4/3

SELECT

and

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 17

11. Compatibility with High Definition Television

High Definition Television is a generic term applying to all the kinds of television signals offering resolution higher

than the present standard pictures. NTSC consists of 720 points per line and 480 lines per picture. PAL consists

of 720 points per line and 576 lines per picture. HDTV has a higher resolution both horizontally and vertically. Your

SAGEM AXIUM™ Home Cinema Screen has been designed for high definition television and has a resolution of

1280 points per line and 720 lines per picture.

The standards:

There are numerous standards for high definition television. SAGEM AXIUM™ Home Cinema Screen is

compatible with the main HDTV standards. You can watch television programmes as well as high

definition DVD by simply using the inputs PC1, PC2 and AV5.

Standards compatible with your SAGEM AXIUM™ Home Cinema Screen

12. HDCP

HDCP is a protocol that allows you to encrypt the content of digital data and protect it against piracy. Your SAGEM

AXIUM™ Home Cinema Screen is equipped with a system compatible with HDCP, which allows you to view this

type of information. You can connect any high definition source on the PC2 inputs if its type appears in the above

list without worrying about the HDCP protection.

Standards

Pixels per

active line

Lines per

picture

Pixels per

complete line

Total number of

lines per frame

Refresh rate Sampling rate Type of format

SMTPE 295M-1997 2 1920 1080 2376 1250 25,00 74,25 interlaced

SMPTE 274M-2003 4 1920 1080 2200 1125 30,00 74,25 interlaced

SMPTE 274M-2003 5 1920 1080 2200 1125 29,97 74,18 interlaced

SMPTE 274M-2003 6 1920 1080 2640 1125 25,00 74,25 interlaced

SMPTE 296M-2001 1 1280 720 1650 750 60,00 74,25 progressive

SMPTE 296M-2001 2 1280 720 1650 750 59,94 74,18 progressive

SMPTE 296M-2001 3 1280 720 1980 750 50,00 74,25 progressive

10. NexTView EPG

NexTView is an electronic programme guide (or EPG) for analog television. It is a service giving information about

current and future programmes. The programme information for all the channels is transmitted up to one week in

advance.

10.1. Installation

To install the EPG, go into the "INSTALL" menu then on "EPG" and accept. In the "ACTIVATION" menu, choose

"YES" using the buttons .

The EPG NexTView uses the signals from certain channels for transmission.

In the "CHANNEL" menu choose the appropriate channel number (see list below).

The EPG is acquired automatically each time you exit from standby on your SAGEM AXIUM™ Home Cinema

Screen.

If you use the PIP or PAP functions within10 minutes after leaving standby, the acquisition of EPG will be

cancelled.

Similarly, pressing the EPG button on the remote control during acquisition will cancel the current procedure and

will display the last EPG in memory, which is perhaps not up to date.

List of channels transmitting NextView EPG on September 1, 2004:

In brackets, is the number of days of programmes consultable in EPG. The television channels are free to

transmit the signal EPG NexTView or not, therefore this list is not legally binding.

10.2. Navigation

Press the EPG button on the remote control to start acquisition.

NB: If this is the first time that you start EPG, you must wait a few minutes for your television set to recover the

available information about programmes.

To obtain information about your choice of programme, use the buttons then accept with OK.

You can sort the programmes by four criteria:

Time: Red button. With buttons , select the time of your choice from "Present" to "Time T+24"

Date: Green button: With buttons , select the date of your choice from "Today" up to "Day D+7"

Topic: Yellow button: With buttons ,choose the programme type from among: All, Films,

News, Variety, Leisure, Sport, Children, Science, Music, Art, Series

Channel: Blue button: With buttons , select the channel of your choice.

To exit from the EPG, press the EPG button on your remote control.

Country Channels transmitting NexTView EPG

France M6 (3), Canal+ (7), TV5 (4), TSR1

Germany RTL2 (3), Kabel1 (4-9), SF1

Austria SF1

Italy TSI

Belgium VT4 (3)

Switzerland SF1, TSR1, TSI

Turkey TRT Family (5-6)

and

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 19

ENGLISH

14. Changing the lamp unit

Only replace the old lamp unit with authorised model RL1280A, reference number SAGEM 251691414

The old lamp unit must be recycled (contact your recycling agency to obtain the address of the nearest depot).

1. You must only change the lamp unit, when the appliance is switched off and mains cable disconnected

from the wall socket.

2. Never try to replace the lamp unit immediately after the SAGEM AXIUM™ Home Cinema Screen has

been switched off. Wait at least 1 hour to allow the lamp to completely cool down.

3. Only handle the lamp unit by the holes designed for this purpose. Never touch any wires or the bulb itself.

4. Make sure that you tighten all the screws and do not leave any foreign bodies inside the appliance.

5. Never replace the fuse of a worn-out lamp.

Remove the left-hand panel by turning the bolt a quarter turn with

a coin.

Then pull it towards you.

Unscrew the two thumbwheels holding the worn-out lamp unit.

The two lamp unit screws are "captive" type, meaning that when

unscrewed they remain in the lamp unit.

Pull it towards you holding it between your thumb and forefinger.

Insert the new lamp unit in place of the old one.

Tighten the two thumbwheels linked to the unit.

Never touch the bulb.

Replace the left-hand panel by pressing it slightly until it goes

back into place.

Turn the bolt again by a quarter turn.

13. Diagnosing Trouble Shooting

Symptoms: Recommended checks:

When first using your SAGEM AXIUM™ Home

Cinema Screen, the red on/off indicator light is not

illuminated.

Check that the mains cable to SAGEM AXIUM™ Home Cinema Screen is

connected to the appliance and the wall socket.

Also check that the switch on the left side of the appliance is pressed in.

The appliance does not light up when the

on/standby button is pressed on the right side

door or remote control

Check that the mains cable to SAGEM AXIUM™ Home Cinema Screen is

connected to the apparatus and the mains socket.

Also check that the switch on the left side of the appliance is pressed in.

There is no picture. If the menus of your SAGEM AXIUM™ Home Cinema Screen are available:

are available: Check that your video appliances are correctly connected and

are active.

Also check that you have selected the correct video source see § 8.4. Check

that your aerial lead is correctly connected. Also check that you have saved

the channels see § 6.3.4. If this is not the case, start a manual or automatic

search. Also check that the switch on the left side of the appliance is

pressed in. The internal temperature indicator light is flashing red: Put your

television set into standby. The lamp condition indicator light is red: the lamp

has gone past its standard working life and may no longer be

functioning. It must be changed.

Black and white picture or picture interference. Check that you have selected the correct video format: e.g. RGB video source

from a DVD player displayed in S-video on your SAGEM AXIUM™ Home Cinema

Screen : check by pressing the picture source selection button if the type of

source selected is compatible with the source emitted.

Check that the colour adjustment is not at minimum.

No sound. Check that the volume is not set at minimum and that mute has not been

activated. Check that your appliances are correctly connected to your SAGEM

AXIUM™ Home Cinema Screen.

Sound weak or discordant during terrestrial reception. Set sound to Mono. Check the "SMART VOL" setting (see § 8.2).

Frozen picture. Check that you have not held the picture: press the “PICTURE of

TELETEXT PAGE HELD” button.

Your appliance does not start on leaving standby

mode when using the button on the right side door

or the standby button on your remote control.

The ON/STANDBY indicator light flashes orange for 20 secs then turns to red or

still flashes orange, switch off the appliance using the switch to the left of your

SAGEM AXIUM™ Home Cinema Screen .Wait 30 secs and restart is using the

normal procedure.

No picture on PIP mode. Check that you have selected sources that is active in PIP mode (see § 8.7).

The remote control is not working normally. Change the batteries.

SAGEM AXIUM™ Home Cinema Screen makes a

hissing noise when switched on.

This noise is normal when starting. It is not considered as malfunctioning.

Pixels on the screen do not light up. In spite of the very high technological precision with which your SAGEM

AXIUM™ Home Cinema Screen has been made, certain pixels may be faulty.

This is not considered as malfunctioning.

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 21

16. Technical characteristics

Video

Screen size: 114 cm

Aspect ratio: 16/9

Resolution: 1280 x 720

Reception Tuner

Input frequencies: 45,5 - 862,25 MHz

Input sensitivity: 20 - 100 dBµV

Number of programmes: 100

PAL, B, G, H, I, SECAM B, G, SECAM L/L'

VHF E2 -E12

VHF A - H (Italy)

VHF H1 - H2 (Italy)

UHF e21 - e69

CATV (S01 - S02)

CATV S11 - S20 (U1 - U10)

CATV S1 - S10 (M1 -M10)

CATV S21 -S41 (hyperband)

PAL D, K, SECAM D, K

VHF R1 - R2

VHF R6 - R12

VHF R3 - R5

UHF E21 - E69

Audio demodulation

AM 6,5 MHz / NICAM 5,85 MHz (L L')

FM 5,5 MHz 5,74 MHz (BG)

FM 5,5 MHz / NICAM 5,85 MHz (B G)

FM 6,0 MHz / NICAM 6,55 MHz (I)

FM 6,5 MHz 6,258 MHz / NICAM 5,85 MHz (D K K')

Audio

Maximum power: 2 x 30 W

Number of speakers: 4

5-band equalizer

Right side door

AV6

S-Video input (Mini Din 4-pin)

Composite video input (1 x RCA)

Audio input (2 x RCA)

PC1

VGA Computer input (SubD 15-pin)

Audio input (jack 3.5)

Headphones

Output (jack 3.5)

6 buttons (on/standby, P+, P-, V+, V-, OK)

Rear panel terminals

AV 1 (RGB/Comp/S-video, audio)

AV 2 (RGB/Comp/S-video, audio)

AV 3 (RGB/Comp/S-video, audio)

AV4

S-video input (Mini-Din 4-pin)

Composite video input (1 x RCA)

Audio-in input (2 x RCA)

AV5 (interlaced or progressive)

Y, Cb, Cr in input (3 x RCA)

Audio input (2 x RCA)

Hi-fi

Audio output (2 x RCA)

PC2

DVI D Computer input

Audio input (2 x RCA)

SPDIF

Digital audio input (1 x RCA)

Digital audio output (1 x RCA)

Input signals

Video signal:

Native/Upscale: SDTV/EDTV (480i/480P) (576i/576P)

HDTV (1080i/720P)

PC signal:

Native/Upscale : VGA 640 x 480, SVGA 800 x 600,

XGA 1024 x 768, SXGA 1280 x 1024

Power supply

AC 220-240 V ~50-60 Hz

Power consumption: 170 W

(Standby 3 W)

Dimensions and weight

Dimensions (w x h x d): 791 x 1287 x 372 mm

Weight: 31 kg

Dimensions and weight (packaged)

Dimensions (w x h x d): 858 x 1197 x 497 mm

Weight: 38 kg

Accessories

Remote control TL-50

Batteries: 2 x 1.5 V (AA Type)

Power cord

User manual

RF cable

Power cord with ground terminal: European power cord

with ground terminal, UK power cord with ground terminal,

Italian power cord with ground terminal.

Norms

EMC (Electromagnetic Compatibility)

EN55020 : 2002

EN55013 : 2001

EN55024 : 09.1998 + A1 : 10.2001 +A2 : 01.2003

EN55022 : 1998 + A1 : 2000 + A2 : 2003

EB61000-3-2 : 2000

EN61000-3-3 : 1995 + A1 : 2001

Electrical safety

EN60065 : 2002

CEI60065 : 2001

15. Index

Automatic installation, 9

Automatic recognition of the format of the source, 13, 16

Bass, 15

Bilingual programmes, 15

Camcorder, 13

Country, 6, 8

Data sources, 14

Decoder, 12

Diagnostics and faults, 21

DVD, 12

EPG, 19

External sources, 12

Factory presets, 8

First rapid installation, 6

Fitting the speaker columns HP, 4

Frequency, 8

Games console, 12

HDCP, 20

HDTV, 20

Headphones, 13

Information on screen, 17

Lamp, 22

Language, 10, 15

List of TV programmes, 9

Locking, 8

Maintenance, 3

Manual installation, 9

Modifying the programme number, 9, 10

Mute, 15

Nextview, 19

Nicam, 24

OSD language menu, 10

Picture adjustment, 14

Picture format, 16

Picture movement, 17

Precautions, 2

Programme selection, 17

Programmed stop, 16

Protection code, 8

Remote control, 7

Right side door, 6, 13

Satellite receiver, 12

Saving television channels, 9

SCART cable, 12

Searching TV channels, 8

Setting up, 4

Sleep timer, 16

Sound adjustment, 15

Stereo, 15

Stop on picture, 17

Subtitles, 17

S-VHS, 12, 13

Teletext sub-pages, 18

Teletext, 18

Treble, 15

Two screens, 17

Video recorder/player, 12

Volume, 15

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 23

ENGLISH

NOTES

16.1. Overall view

RIGHT-HAND VIEW

FRONT PANEL

LEFT-HAND VIEW

REAR PANEL

Power switch (On/Off)

Right side door

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 25

NOTESNOTES

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sagem AXIUM_HDD45 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagem AXIUM_HDD45

Sagem AXIUM_HDD45 User Manual - German - 14 pages

Sagem AXIUM_HDD45 User Manual - Dutch - 14 pages

Sagem AXIUM_HDD45 User Manual - French - 14 pages

Sagem AXIUM_HDD45 User Manual - Italian - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sagem AXIUM_HDD45 Manual

Product: