714919

Sage SWM620 Manual

5
Zoom out
Zoom in
Previous page
1/52
Next page
5
EN
OPERATING YOUR NEW APPLIANCE
Before rst use, remove and safely discard any
packing material, promotional labels and tape
from the wae maker.
1. Wipe the wae maker cooking plates with
a damp sponge or cloth. Dry thoroughly.
2. Place the wae maker on a at, dry surface.
Ensure there is a minimum distance of 10cm
of space on all sides of the wae maker.
Ensure there are no items on top of the
wae maker.
3. Unwind the power cord completely and insert
the power plug into a grounded 220–240V
power outlet.
4. Turn the POWER / MENU dial clockwise until
the dial indicator reaches the desired wae
type or choose the CUSTOM setting.
HEATING will be displayed on the LCD.
NOTE
When the wale maker is turned on
for the rst time, it may emit vapors.
It is safe and not detrimental to the
performance of the appliance.
5. There are 12 browning settings ranging
from ‘1’ (lightest) to ‘12’ (darkest). The default
browning setting is ‘6.’ Use the Light-Dark
browning control dial to adjust the brownness
of your wae. Rotate clockwise to increase
brownness, or rotate counterclockwise to reduce
the brownness for a lighter coloured wae.
6. Once the wae maker has completed the
preheating cycle, two audible alerts will sound
and the LCD screen will turn orange. Lift the
top plate lid completely into the open position.
When the lid is in the open position, the LCD
will turn blue and close lid to start will appear.
Pour in the batter evenly into the wae plates.
The batter should cover the peaks of the wae
plate (approximately half the wae dosing cup
for each wae).
7. Close the lid once the batter has been
poured in. Once the lid is closed, the timer will
automatically begin to count down. The LCD
changes to orange to indicate that the cooking
cycle has commenced. The wae maker will
automatically calculate the correct cooking
time depending on a number of variables.
NOTE
The storage clip should be in it's open
position when the wale maker is cooking.
8. Three audible alerts will sound at the end
of the cooking cycle, the timer will disappear
and “End” will be shown on the screen.
Open the wae maker lid and carefully remove
your waes. If you will no longer be cooking
any more waes, turn the Selector Dial to the
OFF position.
NOTE
Do not use metal utensils when removing
the waes from the wae maker as they
may scratch the non-stick surface.
NOTE
If waes are not removed immediately
after the cooking cycle has completed,
an audible alert will sound every
30 seconds.
9. If you are cooking additional waes, simply
add more batter to the lower wae plate and
follow steps 7 & 8 above. If necessary to reset
the time cycle, press the RESTART button.
A BIT MORE
™
Allows you to conveniently and quickly add time
to a cooking cycle. A BIT MORE
™
can be used
both during the cooking cycle or immediately
after the cooking cycle has nished. In both
instances, it will add a small amount of time
proportional to the overall cooking time for
that batch of waes.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage SWM620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage SWM620 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info