714903
7
Zoom out
Zoom in
Previous page
1/72
Next page
7
EN
Functions
NOTE
This toaster is electronically controlled and
will not operate until the toaster is plugged into
a 220–240V power outlet. Before rst use, remove
any packaging material or promotional labels
attached to your toaster.
1. Insert the power plug into a 220–240V power
outlet. The Brownness Indicators will illuminate
from ‘0’ to ‘6’, and then align to the selected
browning setting (indicated by the position of
the Brownness Dial and Brownness Indicators).
The toaster will revert to stand‑by mode
(Brownness Indicators will dim) after a few
minutes if a button is not pressed or the dial
is not adjusted.
NOTE
When using the toaster for the rst time,
we suggest toasting on the maximum setting
without bread. The toaster may emit a thin smoke
or distinct odour on initial use. This is normal and
not detrimental to the performance of the toaster.
2. Place bread, crumpets, bagels, etc into each
of the toasting slots. Ensure items for toasting
are not too large or too thick to t in the
toasting slots.
3. Select the bread type in toasting slot using the
Bread Selection Ring.
NOTE
Various types of bread may require a dierent
browning setting. For example, raisin toast and
white light textured breads require less toasting
time, while heavier textured rye breads may require
more toasting time. Changing the Bread Selection
Ring accommodates for these changes (removes
the guess work) without changing the Brownness
Selection Dial so you always have the same
browning no matter what the bread type.
4. When using the Brownness Selection Dial, align
the needle with the desired browning setting ‘0’
(lightest) to ‘6’ (darkest). Indicators will illuminate
and align to the selected browning setting.
The Brownness setting is relative to each Bread
Type so there’s no need to keep adjusting the
setting for dierent bread types if you have the
same brownness requirements.
NOTE
When toasting bread for the rst time, it is suggested
to toast on browning setting ‘3’ (9 LED Indicators).
5. To start the toasting process, press the lever
down until it locks into place. The Brownness
Indicators will begin ashing at “0” then start
to gradually count up indicating the level of
brownness until it reaches the browning setting.
6. Once the toasting cycle is complete the carriage
will move to the raised position. Remove the
toast. The brownness indicator will re‑illuminate
to the previously selected browning setting for
a few minutes before entering stand‑by mode.
NOTE
To re‑activate the toaster from stand‑by mode,
press any button or adjust the Brownness Dial.
The Brownness Indicators will re‑illuminate.
WARNING
Do not leave the toaster unattended when in
use as toast may jam. In the unlikely event that
bread, bagels, English muns or toaster pastries
become jammed in the toasting slots, all the
buttons and the LED toasting indicators will ash
and the elements will turn o. Remove the power
plug from the power outlet and allow the toaster
to cool completely before carefully easing the
bread out of the slots. Take care not to damage
the heating elements. Do not use metal utensils.
A BIT MORE™
If your toast comes up too light, one press
of this button adds a little extra toasting time.
This feature can be selected before, during or
after the toasting cycle and can be used with
all Bread Types and FROZEN functions.
To use this feature during the toasting cycle:
Press the A BIT MORE™ / REHEAT button. The
button surround will illuminate white when selected.
The toasting time will automatically increase but will
not illuminate more Brownness Indicators. The A
BIT MORE™ / REHEAT function can be cancelled
by pressing the A BIT MORE™ / REHEAT button
again and the original toasting cycle will continue.
To use this feature before or after the
toasting cycle:
Press the A BIT MORE™ / REHEAT button.
The button surround will illuminate white when
selected. Press the lever down until it locks into
place. The Brownness Indicators will automatically
align with the lowest browning setting then ash
and count down for the additional browning time.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage STA735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage STA735 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info