Manual Sage SPB620 (page 8 of 76) (English, German, Dutch, French, Italian, Portuguese, Spanish)

714872

Zoom out

Zoom in

1/76

Functions

OPERATION

• The blender will only work when the blades and

cup are correctly assembled. This engages the

safety interlock, and allows the motor to run.

• When the cup and blade assembly is correctly

assembled with ingredients inside, invert cup,

and place onto the motor base using the

alignment graphics.

• To blend, securely hold the cup assembly and

twist clockwise on the base to the ON position.

• When the desired consistency is reached,

turn tumbler anti-clockwise to release

and disengage the motor.

• Do not blend continuously for more than

60 seconds at a time. Allow the motor to rest

for 2 minutes before continuing.

• Do not mill / grind continuously for more than

30 seconds at a time. Allow the motor to rest

and the metal grinding attachment to cool

for 30 seconds before continuing.

• Ingredients can be pulsed by rotating the cup

within the bayonet positions, which will turn

the motor on and o.

• When nished blending, wait a few seconds

for the blades to stop spinning before lifting the

cup assembly o the motor base.

• Invert the cup and allow the ingredients to run o

the blades for a few seconds before unscrewing

blades. Hold by the blade collar, and turn

anti-clockwise to remove.

• For safety, turn the motor base o at the wall and

unplug when nished blending.

• The grinding attachment works in a similar way

to the tumblers. Attach the blades in the same

way, and use either a pulsing action or

continuous blending, as described above.

• The surface of the stainless steel grinding

cup may become too hot to touch if grinding

for longer than 30 seconds. Detach from base

by holding the plastic collar.

OVERLOAD PROTECTION SYSTEM

• The blender is equipped with an internal self

resetting overload protector to protect the motor

from damage under heavy or continuous loads.

If the blender suddenly stops during use,

this protector may have tripped.

• Remove the cup, unplug and leave it to cool

for at least 30 minutes. Do not replace the cup

assembly while cooling as the protector may

reset causing it to start unexpectedly.

• Tripping the protector indicates that the extractor

is being loaded too heavily, or with excessive

continuous use. Reduce the amount of

ingredients used or allow more time in between

blending to prevent it from happening again,

which will help preserve the life of the motor.

• The MAX line is usually a good indicator to

prevent overly heavy loading, however some

especially dense combinations of ingredients

may still strain the motor. If the motor seems to

be straining or running slowly, only operate for

10 seconds at a time, or reduce the amount

of ingredients used. Adding more liquid can

also help to loosen dense mixtures.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sage SPB620 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sage SPB620 Manual

Product: