711637

Sage SOV820 - the Smart Oven Pro Manual

8
Zoom out
Zoom in
Previous page
1/96
Next page
8
Functions
OPERATING YOUR OVEN
1. Position the wire rack so the spokes face
upward and insert it into the desired rack
position. The rack positions are conveniently
printed on the right-hand side of the oven
door window.
2. Turn the FUNCTION dial until the indicator on
the LCD screen reaches the desired setting.
3. Turn the TEMPERATURE dial to the left
to reduce the temperature or to the right
to increase the temperature.
4. The bottom gure on the LCD screen indicates
the preset cooking time for the selected setting.
For the TOAST and CRUMPET settings it
indicates the number of slices. Turn the TIME
dial to the left to reduce the cooking time
or to the right to increase the cooking time.
5. For settings without a preheat cycle (TOAST,
CRUMPET, GRILL, REHEAT, WARM),
place the food directly on the wire rack or on
the included pizza pan, grilling rack and/or
roasting pan. Ensure the food is centred
in the oven for the most even cooking.
a) Close the oven door.
b) Press the START/CANCEL button.
The button backlight will illuminate red,
the oven alert will sound, and the LCD
screen will illuminate orange.
c) The timer will be displayed and begin to count
down. The cooking temperature and time
can be adjusted during the cooking cycle.
6. For settings that feature a preheat cycle
(BAKE, ROAST, PIZZA, COOKIES, SLOW
COOK), press the START/CANCEL button
before placing food in the oven. The button
backlight will illuminate red, the oven alert
will sound and the LCD screen will indicate
a blinking ‘PREHEATING’ while the oven
is heating up.
a) When the oven is ready for use, the blinking
‘PREHEATING’ will go out, the oven alert will
sound and the timer will start counting down.
Place the food in the oven, either directly
on the wire rack or on the included pizza pan,
grilling rack and/or roasting pan. Ensure the
food is centred in the oven for the most
even cooking.
b) Close the oven door.
c) The timer will continue to count down.
The cooking temperature and time can
be adjusted during the cooking cycle.
7. At the end of the cooking cycle, the oven
alert will sound, the START/ CANCEL button
backlight will go out and the LCD screen
will illuminate blue.
MAGNETIC AUTO-EJECT RACK
When the wire rack is inserted into the middle
rack position, it will automatically eject halfway
out of the oven when the door is opened so
you can easily remove your toasted items.
Always open the door slowly when the wire rack
is in this position to prevent the rack from ejecting
too quickly.
NOTE
The top of the oven is very hot during and after
operation. As a result, storing items on top
of the oven is not recommended.
The Sage Bamboo Cutting Board ts
in the ribbed section on top of the oven. Visit
www.sageappliances.com for more information.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage SOV820 - the Smart Oven Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage SOV820 - the Smart Oven Pro in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info