Manual Sage SJB815 - the 3X Bluicer Pro (page 14 of 136) (English, German, Dutch, French, Italian, Portuguese, Spanish)

712007

Zoom out

Zoom in

1/136

Troubleshooting

LCD screen turns on

but appliance doesn't

respond to controls.

• The safety locking arm may not be correctly engaged in the vertical

operating position. In this case, the LCD screen will show an animated

prompt

. Check the top cover is properly aligned and the locking arm

is located rmly into the two grooves on either side of the juicer cover or

blender jug.

Food is unevenly

chopped

• This can happen when too much food is being added at one time.

Try a smaller amount, and work in batches if necessary.

Food is chopped

too ne or is watery

• Try blending for shorter period of time. Use the PULSE function for

better control.

Excess pulp

building up in the

stainless-steel

lter basket

• Turn the appliance o. Disassemble to scoop excess pulp o the juicer

cover.

• Reassemble and continue juicing. Alternating soft and hard ingredients

may help avoid this.

Pulp too wet

and reduced

extracted juice

• The cleaner the lter, the better the juice yield, and dryer the pulp. Be sure

to thoroughly clean the juicer as soon as possible after each use. Remove

the stainless-steel lter basket and thoroughly clean mesh walls with a

cleaning brush. Rinse the lter basket under hot water. If the ne mesh

holes are blocked, soak the basket in a solution of hot water with 10%

lemon juice to unblock the holes or wash in the dishwasher (top shelf).

This will remove excess ber build up which could be inhibiting the ow.

• Pusher force could reduce yield because it slows the motor down.

Avoid putting pressure on the food pusher when pushing ingredients

down the feed chute.

• If juicing large amounts of brous ingredients like rhubarb and pineapple,

cleaning the lter basket in between might be required.

Juice leaks between

the lter bowl

surround and

the juicer cover

• Try a slower juicing speed and push the food pusher down the feed chute

more slowly.

• Ensure there is no build up in the lter basket.

Juice sprays

out from spout

• The juice is being extracted too fast; try a slower juicing speed (if possible)

and push the food pusher down the feed chute more slowly.

Juice in lter

bowl is left after

juicer stopped

• Turn the speed dial up to highest speed setting and operate for 5 seconds.

That can help moving the remaining juice into the jug.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sage SJB815 - the 3X Bluicer Pro in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sage SJB815 - the 3X Bluicer Pro Manual

Product: