714736

Sage SFP800 Manual

16
Zoom out
Zoom in
Previous page
1/128
Next page
16
TROUBLESHOOTING
PROBLEM EASY SOLUTION
The food processor

operation
• The lid may have become unlocked, check to make sure
it is securely in position.
• If the motor overloads, the ‘OVERLOAD’ icon in the LCD will
start to ash. Switch o by pressing the POWER / OFF button
and unplug the power cord. Allow the food processor to cool
for 20–30 minutes before resuming.
The motor
slowed down
during operation
• This is normal as some heavier loads may require the motor
to work harder. Reposition the food in the feed chute
and continue processing.
• The maximum load capacity may have been exceeded.
Refer to the Instruction Booklet for maximum quantities.
Remove some of the ingredients and continue processing.
The food processor

during processing
• Make sure the rubber feet at the bottom of the unit are clean
and dry. Also make sure that the maximum load capacity
is not being exceeded.
Dough doesn’t
fully incorporate
ingredients
• When kneading dough, always start the food processor before
adding liquid. Add liquid in a slow, steady stream, allowing the
dry ingredients to absorb it. If too much liquid is added, wait
until ingredients in the processing bowl have mixed, then add
remaining liquid slowly (do not turn o the machine). Pour liquid
onto the dough as it passes under the feed chute opening,
do not pour liquid directly onto the bottom of the processing bowl.
Dough feels tough
after kneading
• Divide dough into 2 or 3 pieces and redistribute evenly
in processing bowl. Process 10 seconds or until uniformly
soft and pliable.
Dough is too dry
• While machine is running, add water through the small feed
chute, 1 tablespoon at a time until dough cleans the inside
of the processing bowl.
Dough is too wet
• While machine is running, add our through the small feed
chute, 1 tablespoon at a time until dough cleans the inside
of the processing bowl.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage SFP800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage SFP800 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info