711603
9
Zoom out
Zoom in
Previous page
1/192
Next page
9
EN
Assembly
BEFORE FIRST USE
Machine Preparation
Remove and discard all labels and packaging
materials attached to your espresso machine.
Ensure you have removed all parts and
accessories before discarding the packaging.
Remove the packaging and the plastics bags
containing the water lter and water lter holder.
Clean the water tank, portalter, lter baskets,
milk jug and drip tray using warm water and
a gentle dish washing liquid. Rinse well,
then dry thoroughly before reassembling.
INSTALLING THE WATER FILTER
Remove the water lter and water lter holder
from the packaging.
Set the reminder for the next month of
replacement. We recommend to replace
the lter after 3 months.
Soak the lter in cold water for 5 minutes.
Wash the lter holder with cold water.
Insert the lter into the two parts of the lter
holder. Ensure they are connected.
Remove the water tank from the machine.
Align the base of the lter holder with the
adapter inside the water tank. Push down
to lock into place.
Fill the water tank with cold potable water and
reattached the machine, ensuring it is properly
attached and sitting ush to the back of the
machine.
Refer to ‘Care & Cleaning’ on page 18 for further
instructions.
NOTE
DO NOT use highly ltered, demineralised or
distilled water in this machine. This may aect
the taste of the coee.
NOTE
For replacement water lters, visit the Sage
webpage or contact Sage Customer Service.
FILLING THE WATER TANK
Ensure the water lter is securely tted inside
the water tank.
Use the handle at the top of the water tank to
assist in lifting it up and away from the machine.
Refer to Instruction Book for more information.
Contact the Breville Customer Service Centre
for further assistance.
AUS 1300 139 798
NZ 0800 273 845
www.Breville.com.au
INSTALL
WATER
FILTER
2
Rinse lter and
mesh
2 43 6
Replace water tankAssemble Set date + 2 months Install lter in tank
5
Soak for
5 minutes
Replace water lter
every 2 months or
60 tank rells
1
MAX
MIN
MAX
MIN
MAX
MIN
Fill the water tank with cold potable tap water
to below the MAX marking indicated on the side
of the water tank.
Replace the water tank back on the machine,
pressing down to ensure that it is properly
positioned and attached to the machine.
Refer to Instruction Book for more information.
Contact the Breville Customer Service Centre
for further assistance.
AUS 1300 139 798
NZ 0800 273 845
www.Breville.com.au
INSTALL
WATER
FILTER
2
Rinse lter and
mesh
2 43 6
Replace water tankAssemble Set date + 2 months Install lter in tank
5
Soak for
5 minutes
Replace water lter
every 2 months or
60 tank rells
1
MAX
MIN
MAX
MIN
NOTE
Replace the water daily. The water tank should be
lled with fresh, cold tap water before each use.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage SES878 - the Barista Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage SES878 - the Barista Pro in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info