Manual Sage SBL620 (page 7 of 76) (English, German, Dutch, French, Italian, Portuguese, Spanish)

714757

Zoom out

Zoom in

1/76

MANUAL SPEED SELECTION ON / OFF

The ON / OFF button powers the unit into

READY mode.

ELECTRONIC SPEED CONTROL

There are 5 electronic speed buttons from

MIX through to LIQUIFY.

MIX combines more delicate foods with a folding

motion, and is good for combining wet and dry

ingredients.

LIQUIFY is the fastest setting, and is ideal for

breaking down ingredients to make cocktails

and other nely blended mixtures.

Select the required speed (1 to 5) by pressing

the corresponding speed button. The blender

will start to operate and the selected speed button

will illuminate. The ON / OFF button will illuminate

and cease to ash.

The LCD timer screen will start counting up in one

second increments until 120 seconds is reached.

NOTE

Operate the blender only for the appropriate

amount of time required – do not over blend.

When 120 seconds is reached, the blender will

automatically stop blending and the selected speed

button illumination will go out.

The ON / OFF button will illuminate and ash.

After a few seconds the LCD timer screen will

revert to ‘00’.

• The Sage

Blender will automatically stop

blending after 120 seconds. This is a safety

feature and restricts wear on the motor.

• The speed can be changed at any time during

the blending process. Each time a new speed

is selected its button will illuminate and the

previous speed button illumination will go out.

The number of seconds on the LCD timer screen

will continue to count upwards to 120 seconds

unless interrupted.

Count-up timer

The blender timer counts up in seconds as it

blends on one of the 5 electronic speeds from MIX

to LIQUIFY. When using the timer this way, the

blender will stop after 2 minutes.

PRESET PROGRAMS

Your Sage

Blender features three additional

functions, ‘AUTO PULSE/ICE CRUSH’,

‘GREEN SMOOTHIE’ and ‘SMOOTHIE’. These

three pre-programmed cycles automatically adjust

the blending time and speeds to optimise blending

results. The maximum amount of ice cubes the

blender can blend at any one time is 1 standard

ice tray or 250g. Select the required function by

pressing the corresponding function button. The

blender will start to operate and the selected

function button will illuminate. The ON / OFF button

will illuminate and stop ashing. The LCD timer

screen will start counting down in one second

increments until ‘00’ is displayed.

AUTO CLEAN

Use to remove most of the ingredients o the

blender walls and blades. Add 2 cups warm soapy

water, and press the clean button.

For harder to clean, sticky or thick ingredients,

add ½ teaspoon of dish liquid detergent for extra

cleaning power. For best results, clean the blender

jug this way immediately after use.

NOTE

If the blender is running and a dierent button

is pressed, the speed will automatically switch

to that program without stopping.

WARNING

Never place anything other than food and liquids

in the blender while the motor is running.

NOTE

Use the PULSE button when the food that is being

processed is too thick or coarse to circulate within

the blender jug.

At the end of use, always ensure the blender is

turned o by pressing the ON / OFF button on

the control panel. Then unplug the cord. Ensure

the motor and blades have completely stopped

before attempting to move the appliance, or

when the Sage

Blender is not in use and before

disassembling, cleaning and storing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sage SBL620 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sage SBL620 Manual

Product: