Manual Sage BTA735 (page 7 of 72) (English, German, Dutch, French, Italian, Portuguese, Spanish)

714902

Zoom out

Zoom in

1/72

Functions

NOTE

This toaster is electronically controlled and

will not operate until the toaster is plugged into

a 220–240V power outlet. Before rst use, remove

any packaging material or promotional labels

attached to your toaster.

1. Insert the power plug into a 220–240V power

outlet. The Brownness Indicators will illuminate

from ‘0’ to ‘6’, and then align to the selected

browning setting (indicated by the position of

the Brownness Dial and Brownness Indicators).

The toaster will revert to stand‑by mode

(Brownness Indicators will dim) after a few

minutes if a button is not pressed or the dial

is not adjusted.

NOTE

When using the toaster for the rst time,

we suggest toasting on the maximum setting

without bread. The toaster may emit a thin smoke

or distinct odour on initial use. This is normal and

not detrimental to the performance of the toaster.

2. Place bread, crumpets, bagels, etc into each

of the toasting slots. Ensure items for toasting

are not too large or too thick to t in the

toasting slots.

3. Select the bread type in toasting slot using the

Bread Selection Ring.

NOTE

Various types of bread may require a dierent

browning setting. For example, raisin toast and

white light textured breads require less toasting

time, while heavier textured rye breads may require

more toasting time. Changing the Bread Selection

Ring accommodates for these changes (removes

the guess work) without changing the Brownness

Selection Dial so you always have the same

browning no matter what the bread type.

4. When using the Brownness Selection Dial, align

the needle with the desired browning setting ‘0’

(lightest) to ‘6’ (darkest). Indicators will illuminate

and align to the selected browning setting.

The Brownness setting is relative to each Bread

Type so there’s no need to keep adjusting the

setting for dierent bread types if you have the

same brownness requirements.

NOTE

When toasting bread for the rst time, it is suggested

to toast on browning setting ‘3’ (9 LED Indicators).

5. To start the toasting process, press the lever

down until it locks into place. The Brownness

Indicators will begin ashing at “0” then start

to gradually count up indicating the level of

brownness until it reaches the browning setting.

6. Once the toasting cycle is complete the carriage

will move to the raised position. Remove the

toast. The brownness indicator will re‑illuminate

to the previously selected browning setting for

a few minutes before entering stand‑by mode.

NOTE

To re‑activate the toaster from stand‑by mode,

press any button or adjust the Brownness Dial.

The Brownness Indicators will re‑illuminate.

WARNING

Do not leave the toaster unattended when in

use as toast may jam. In the unlikely event that

bread, bagels, English muns or toaster pastries

become jammed in the toasting slots, all the

buttons and the LED toasting indicators will ash

and the elements will turn o. Remove the power

plug from the power outlet and allow the toaster

to cool completely before carefully easing the

bread out of the slots. Take care not to damage

the heating elements. Do not use metal utensils.

A BIT MORE™

If your toast comes up too light, one press

of this button adds a little extra toasting time.

This feature can be selected before, during or

after the toasting cycle and can be used with

all Bread Types and FROZEN functions.

To use this feature during the toasting cycle:

Press the A BIT MORE™ / REHEAT button. The

button surround will illuminate white when selected.

The toasting time will automatically increase but will

not illuminate more Brownness Indicators. The A

BIT MORE™ / REHEAT function can be cancelled

by pressing the A BIT MORE™ / REHEAT button

again and the original toasting cycle will continue.

To use this feature before or after the

toasting cycle:

Press the A BIT MORE™ / REHEAT button.

The button surround will illuminate white when

selected. Press the lever down until it locks into

place. The Brownness Indicators will automatically

align with the lowest browning setting then ash

and count down for the additional browning time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sage BTA735 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sage BTA735 Manual

Product: