Manual Sage BSM600 (page 6 of 68) (English, German, Dutch, French, Italian, Portuguese, Spanish)

714927

Zoom out

Zoom in

1/68

Assembly

1. Place the mesh filter in the top of the burn

chamber and press down with a finger to

seat it into the bottom of the burn chamber.

2. Place the burn chamber into the barrel.

Push down until the spring around the burn

chamber provides a small click sensation.

CLICK

3. Press the larger plastic end on the silicone hose

rmly into the round hole on the front of the barrel.

BATTERIES

Use 4 x AA (1.5V alkaline) batteries only.

(No rechargeable batteries)

1. Remove battery cover from underside of unit

by sliding clip towards rear and rotating outwards.

2. Insert batteries into cavity with orientation

to match the outer face of the battery cover.

3. Replace battery cover and press to snap

into place.

Functions

BEFORE FIRST USE

Wipe the burn chamber and mesh filter with

a damp cloth.

OPERATION

1. Place a small amount of wood chips (or desired

smoking materials) into the burn chamber.

NOTE

Do not overll the burn chamber. The wood

chips should just cover the mesh lter area

with a thin layer.

2. Press down the power switch located on

the rear of the main unit, to activate the fan

at high speed. This position is designated

by 2 lines = on the switch.

–

Low Speed

O

High Speed

To smoulder the

wood chips and

generate smoke.

For greater airow

to assist in initially

igniting wood chips.

3. Use a handheld lighter or match to apply

a ame to the top surface of the wood chips.

Move the ame around to ignite the entire

exposed surface. For best results make sure

the burning area is evenly distributed or centred.

WARNING

Maintain the presence of the lighter for

a period of time sucient to start ignition only.

Excessive heat may cause damage to the unit.

4. Once the smoke is seen exiting the end of the

hose, depress the top of the switch to maintain

the fan on low speed (designated by 1 line –).

Allow the wood chips to smoulder and direct

the smoke to where required.

5. When sucient smoke has been generated

or wood chips are extinguished, return the

switch the central position to turn the fan o

(designated by a circle O).

6. Allow the unit to cool completely after burning

has completed.

7. When cooled completely the burn chamber

can be removed by pulling it free of the barrel.

NOTE

Invert the burn chamber and tap on a solid surface

to remove any remaining wood chips or ash.

It is recommended to clean the burn chamber prior

to re-assembly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sage BSM600 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sage BSM600 Manual

Product: