617971
28
Zoom out
Zoom in
Previous page
1/32
Next page
28
Troubleshooting
PROBLEM EASY SOLUTION
The lid cannot be opened at the
end of the cooking cycle
Press the STEAM RELEASE button until all internal pressure is
released and the cooker can be opened.
Once all internal pressure has been released using the STEAM
RELEASE button, turn the pressure release valve to the open
position, facing away from the lid knob.
If this occurs frequently, the cooker may need to be adjusted to
suit your current altitude. Follow “Altitude Adjust” instructions on
page 15.
‘Open Lid' is displayed on the LCD
when the lid is open
Turn the lid knob clockwise and counter clockwise.
Steam is escaping from the lid
OR
Safety locking pin does not rise
OR
Cooker is not getting to pressure
OR
Timer will not count down
Assemble the lid correctly ensuring there is no gap between lid
arm and the stainless steel lid. The sealing nut should be screwed
on tightly. Follow step 5 on page 12.
Ensure the silicone lid seal is clean, free from damage or cracks and
is properly inserted. Follow step 4 on page 12.
Ensure that the safety locking pin can move freely up and down.
Follow step 6a on page 26.
When the lid is locked, ensure the safety locking pin is properly
aligned within the opening of the lid arm. See step 7, page 18.
Ensure that the pressure release valve is properly seated in position
and facing the lid knob. Follow step 8 on page 19.
Add more liquid/food to the bowl. There should be a minimum of
1 litre combined food and liquid.
If problem persists, call Sage Customer Service.
The cooker automatically switches
to keep warm without going
through a complete cooking cycle
Add more water to the cooking bowl and restart the cycle.
Water is collecting on
the benchtop
Ensure the cooker is on a flat level surface and that the
condensation drip cup is installed on the back of the cooker.
Follow “Preparing the Fast Slow Pro” instructions on page 12.
Empty the condensation drip cup.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BPR700 - the Fast Slow Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BPR700 - the Fast Slow Pro in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sage BPR700 - the Fast Slow Pro

Sage BPR700 - the Fast Slow Pro Quick start guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info