617976
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
OVERLOAD PROTECTION SYSTEM
The blender is equipped with an internal
self resetting overload protector to protect
the motor from damage under heavy or
continuous loads. If the extractor suddenly
stops during use, this protector may
have tripped.
Remove the cup, unplug and leave it to cool
for at least 30 minutes. Do not replace the
cup assembly while cooling as the protector
may reset causing it to start unexpectedly.
Tripping the protector indicates that the
extractor is being loaded too heavily, or
with excessive continuous use. Reduce the
amount of ingredients used or allow more
time in between blending to prevent it from
happening again, which will help preserve
the life of the motor.
The MAX line is usually a good indicator to
prevent overly heavy loading, however some
especially dense combinations of ingredients
may still strain the motor. If the motor seems
to be straining or running slowly, only
operate for 10 seconds at a time, or reduce
the amount of ingredients used. Adding more
liquid can also help to loosen dense mixtures.
Note that none of the recipes in the recipe
book provided with this product are
considered a heavy load.
Hints & Tips
Never blend hot (or even warm) ingredients.
The blades form a seal with the cups, and
there is no venting for steam to be released.
We recommend not blending longer than the
recommend times in the recipes provided
with this product, or no more than 1 minute
at a time. Ingredients in the cup may become
warm and cause internal pressure on the
seals making it difficult to open or splatter
ingredients when opened. Allow to cool and
take care when opening.
Always add liquids for optimum blending.
If the blending action is not causing
the ingredients to circulate, try adding
more liquid.
If the results are lumpy, try reducing the
ingredients, or blending in batches.
Run the extractor only for the appropriate
amount of time required – do not over blend
ingredients.
If foods are thick, use a pulsing action by
twisting the cup to engage and disengage
the motor as needed. This will help
ingredients circulate.
Do not exceed the maximum mark when
adding foods and liquids into the cup.
To stop blending at any time, rotate the cup
anti-clockwise to disengage the motor.
The maximum amount of ice cubes the
extractor can process is 4 from a standard ice
tray. This also applies to frozen fruit. Cut fruit
into pieces of a similar size to an ice cube
before freezing.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BPB550 - the Boss To Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BPB550 - the Boss To Go in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sage BPB550 - the Boss To Go

Sage BPB550 - the Boss To Go Quick start guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info