712001
22
Zoom out
Zoom in
Previous page
1/164
Next page
22
PROBLEM EASY SOLUTION
The motor
does not start
There is a safety interlock switch to prevent the motor from starting
if it is not properly assembled. Make sure the processing bowl and
lid are securely locked into position.
If you are slicing or shredding and the above solution does not work,
make sure that the food contents in the feed chute are cut below the
maximum ll line so that the activation rod can engage the motor.
Make sure the large food pusher is inserted in the feed chute low
enough to engage safety interlock switch.
If the motor still will not start, check the power cord and power outlet.
The food processor

operation
The lid may have become unlocked; check to make sure it is securely
in position.
If the motor overloads, the ‘OVERLOAD’ icon in the LCD will start
to ash. Switch o by pressing the POWER / OFF button and unplug
the power cord. Allow the food processor to cool for 2030 minutes
before resuming.
The motor slowed
down during
operation
This is normal as some heavier loads (e.g. slicing/shredding cheese)
may require the motor to work harder. Reposition the food in the feed
chute and continue processing.
The maximum load capacity may have been exceeded. Remove
some of the ingredients and continue processing.
The food processor
vibrates/moves
during processing
Make sure the rubber feet at the bottom of the unit are clean and dry.
Also make sure that the maximum load capacity is not being exceeded.
This is normal as some heavier loads may require the motor to work harder.
INSERT PUSHER

Make sure that food does not exceed the max line in the food chute.
If pusher is fully inserted and this warning ashes on the screen, check
that the bowl and lid are assembled correctly. Bowl handle should be
facing the front of the unit.
The food processor
stalls when dicing
Stop the machine, very carefully remove the dicing disc.
Using the cleaning cap, clear out the food built up in the
dicing grid and dicing disc.
Some foods are too hard for the dicer to process, and cause
the motor to stop. Some foods need to be par-cooked, check
the food processing guide.
Troubleshooting
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BFP820 - the Kitchen Wizz Peel Dice at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BFP820 - the Kitchen Wizz Peel Dice in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info