617956
22
Zoom out
Zoom in
Previous page
1/54
Next page
21
PAge heAder.....
BASIC FOOD PROCESSING TECHNIQUES
Transfer the dough to a lightly floured
surface and knead for a further 5 minutes if
necessary until soft and pliable. Place dough
into large, greased mixing bowl and stand
covered in a warm place until doubled in
size. Turn the dough onto a lightly floured
surface and knead again until smooth and
elastic. Shape the dough, allow to rise in a
warm area then bake in a hot oven.
Biscuit dough
Insert the dough blade (or you can use
the 4 blade processor) into the bowl.
Place softened butter and sugar into the
processing bowl. Process using the START/
PAUSE button until lightly creamed. With
the motor running, add eggs one at a time
down the small feed chute, mixing well after
each addition. Place dry ingredients into the
processing bowl and use the PULSE button
until ingredients are just combined. Add
dried fruit, nuts, etc. through the small feed
chute and use the PULSE button until the
additions are folded through evenly.
Melt ‘n’ mix biscuits
Insert the dough blade into the bowl. Place
melted ingredients, followed by liquid
ingredients then dry ingredients into the
processing bowl. Process ingredients using
the PULSE button until just combined. If
necessary, interrupt the processing, remove
the lid and scrape the mixture from the sides
of the bowl. Replace the lid and continue but
do not over-process the mixture. Add dried
fruit, nuts etc. after this step using PULSE
button until folded through evenly.
SHREDDING AND GRATING WITH
THE REVERSIBLE SHREDDER
Prepare fruit or vegetables by washing or
peeling first.
First cut the food to fit the length of the feed
chute (no more than 14cm). Food can be
shredded length ways to make a long shred.
If food fits without the need to cut, trim one
end so that it sits flat in feed chute.
Reversible Shredder
1. Place either the coarse or fine
shredding disc onto the disc spindle
and then into the processing bowl.
2. Prepare food as directed in the
following food categories or recipes.
Both thick and thin grating can be achieved
by using either the coarse or fine shredding
disc. Use one side of the disc for coarse
grating. Carefully turn over the disc so that
the process required is facing upwards.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BFP800 - the Kitchen Wizz Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BFP800 - the Kitchen Wizz Pro in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sage BFP800 - the Kitchen Wizz Pro

Sage BFP800 - the Kitchen Wizz Pro Quick start guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info