Manual Sage BES880 - the Barista Touch (page 8 of 156) (English, German, Dutch, French, Italian, Portuguese, Spanish)

711599

Zoom out

Zoom in

1/156

Functions

INSTALLING THE WATER FILTER

• Remove the water lter and water lter holder

from the plastic bag.

• Soak the lter in cold water for 5 minutes.

• Wash the lter holder with cold water.

• Set the reminder for next month of replacement.

We recommend to replace the lter after

3 months.

• Insert the lter into the two parts of the

lter holder.

• To install the assembled lter holder into the

water tank, align the base of the lter holder

with the adapter inside the water tank.

Push down to lock into place.

• Fill the water tank with cold water before sliding

back into position at the back of the machine and

locking into place.

FIRST USE

1. Press POWER button to turn the machine on.

2. Follow the instructions on screen to guide you

through rst use setup.

3. After completing setup, the machine will tell that

it is ready to use.

The machine is now in STANDBY mode.

GuideExit

Your Barista Touch is now ready

Select the guide to find out more about your Barista Touch

or exit to proceed to your drink selection

4. Touch “Guide” and the machine will guide you

step by step to make your rst coee. Touch the

 and go to the Drinks Menu or < to repeat the

Setup. To repeat the Guide at any time, go to

Settings Menu.

NOTE

If your water hardness is either 4 or 5 when tested,

we strongly recommend you change to an alternate

water source.

GRINDING OPERATION

Insert bean hopper into position on-top of the

machine. Turn dial to lock into place. Fill hopper

with fresh beans.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sage BES880 - the Barista Touch in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sage BES880 - the Barista Touch Manual

Product: