617989

Sage BES810 - the Duo-Temp Pro Manual

10
Zoom out
Zoom in
Previous page
1/116
Next page
10
CARE & CLEANING
The water lter provided helps to prevent
scale build up which over time can aect the
performance of your machine, potentially causing
blockages and heating problems.
Replacing the water lter every three months
will reduce the mineral build up in the machine.
If you live in a hard water area, we recommend you
change the water lter more frequently.
PORTAFILTER CLEANING
Periodically run water through the machine with the
portalter in place, but without any ground coee,
to rinse out any residual coee particles.
MACHINE CLEANING
After regular use, residual grinds and oil build up in
the machine can aect coee extraction.
We recommend performing a cleaning cycle every
2-3 months using the cleaning tablet provided.
To perform a cleaning cycle:
1. Insert the silicon disk into the portalter.
2. Place the cleaning tablet on the silicon disk
(position in the centre).
3. Insert the portalter into the group head
and rotate to right to lock in position.
4. Ensure Power On / O button is on.
5. Turn the dial to the ‘Espresso’ position for
20 seconds.
6. Turn the dial back to the ‘Standby’ position.
7. Repeat steps 5-6 three times or until the
cleaning tablet is dissolved.
DESCALING
Even if you are correctly using the water lter
provided, we recommend you to descale when
you see scale build-up in the water tank.
Visit Sage
®
webpage to purchase “the Descaler”.
1. Ensure the Control Dial is in the ‘Standby’
position, the machine is switched o.
2. Remove the lter holder.
3. Empty one sachet (25g) into 1 litre of warm
water, stir to dissolve.
Pour solution into the water tank.
4. Press the POWER button to switch the
machine on.
5. Place a large container under both the
Group Head and the Steam Wand.
6. Set the Control Dial to the ‘Espresso’
position and let half the descale solution
run through the Group Head.
7. Set the Control Dial to the ‘Steam’ position
and allow the remaining solution to run
through the Steam Wand. When the liquid
stops owing, set the Control Dial back
to the ‘Standby’ position.
8. After descaling, remove the water tank
and rinse thoroughly then rell with fresh
cold water. To rinse the machine, repeat
steps 5-8.
AUTO OFF MODE
The machine automatically switches to AUTO OFF
mode after 20 minutes.
INSTALLING / REPLACING THE
FILTER IN THE WATER TANK
Set current month Remove lter from
bag and soak for
5min
Assemble water
lter parts
Ensure parts are
connected
Install lter in tank Install water tank Replace lter
after 90 days
or after 40L
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BES810 - the Duo-Temp Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BES810 - the Duo-Temp Pro in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sage BES810 - the Duo-Temp Pro

Sage BES810 - the Duo-Temp Pro User Manual - English - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info