Manual Sage BBL920 (page 12 of 100) (English, German, Dutch, French, Italian, Portuguese, Spanish)

714879

Zoom out

Zoom in

1/100

Care & Cleaning

Vessels and lids

To avoid food drying on blades, vessels

and lids, follow the below steps as soon

as possible after use:

• Rinse most of the ingredients o the vessels

and lids.

2-litre jug

• Add 1L of warm water and 1–2 drops

of detergent and press the CLEAN button.

• Rinse the jug and lid again and/or wash

separately in warm soapy water with a soft cloth

or bottle brush.

Personal blender attachments

• All personal blender attachments are dishwasher

safe on top shelf.

• To help removing food residues from the blades

and cup walls you can add 250mL of cold water

to the personal blender cup and press CLEAN.

• Rinse the cup with warm water afterwards.

• If not clean yet, hand wash in warm, soapy

water using a mild liquid detergent and

non-abrasive sponge.

WARNING

There is a risk of pressurisation from

hot water and / or detergent. When rinsing the

personal blender cup by using the CLEAN cycle

never add hot or even warm water, as the steam

produced can create dangerous pressurisation.

Do not add detergent, as the foam produced will

expand and may cause pressurisation.

WARNING

Oils in citrus rind can damage the material of your

jug and personal blender cup if being exposed to

it for a longer period. Always clean your blender

jug and personal blender cup immediately after

processing citrus rind.

Motor base

To clean the motor base, wipe with a soft, damp

cloth then dry thoroughly. Wipe any excess food

particles from the power cord.

Cleaning agents

Do not use abrasive scouring pads or cleaners

on either the motor base or the jug, as they may

scratch the surface. Use only warm soapy water

with a soft cloth.

Dishwasher

The blender jug , personal blender cup, personal

blender blade system, tamper, scraper and all lids

can be washed in the dishwasher on a standard

wash cycle. Jug can be placed on the bottom shelf,

however the personal blender cup and lids should

be on the top shelf only.

Stubborn food stains and odours

Strong smelling foods such as garlic and sh, and

some vegetables such as carrots, may leave an

odour or stain.

2 Litre jug

To remove, clean the jug and lid using

the CLEAN instructions. Add 2 tablespoons

bicarbonate of soda and ½ cup (125mL) vinegar

into jug and let the mixture froth for 1 minute.

Scrub the jug and lid with the mixture using a soft

dishwashing brush. Add 2 cups warm water and

allow to stand for 5 minutes. Attach jug to blender

base. Secure lid and then press the CLEAN button.

Thoroughly rinse the jug, and allow to air dry. Store

jug and lid with the lid o to allow air to circulate.

Personal blender cup

To remove, pour warm soapy water and

ll to the MAX mark. Set aside to soak

for 5 minutes. Then wash with a mild detergent and

warm water, rinse well and dry thoroughly. Do not

use the CLEAN function to remove stubborn stains

and odours from your personal blender cup.

Dry milling

Milling hard ingredients like spices, nuts, sugar,

coee, grains, etc will cause scratching and

clouding to the inside surfaces of the jug.

Some spices and herbs release aromatic oils that

may discolour the jug or leave an aroma.

These are cosmetic results from milling these

kinds of ingredients, and does not aect the

performance of the jug.

Storage

Store your blender upright with the blender jug

assembled on the motor base, or beside it. Store

the personal blender cup with the blade system

assembled. Do not place anything on top. To allow

air to circulate, keep the lid o.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sage BBL920 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sage BBL920 Manual

Product: