714885

Sage BBL820 Manual

11
Zoom out
Zoom in
Previous page
1/84
Next page
11
EN
Stubborn food stains and odours
Strong smelling foods such as garlic and sh,
and some vegetables such as carrots, may
leave an odour or stain.
Dry milling
Milling hard ingredients like spices, nuts,
sugar, coee, grains, etc will cause scratching
and clouding to the inside surfaces of the jug.
Some spices and herbs release aromatic oils
that may discolour the jug or leave an aroma.
These are cosmetic results from milling these
kinds of ingredients, and does not aect the
performance of the jug.
Storage
Store your blender upright with the blender
jug assembled on the motor base, or beside
it. Do not place anything on top. To allow air to
circulate, keep the lid o.
Guarantee
7 YEAR LIMITED GUARANTEE
Sage Appliances guarantees this product for
domestic use in specied territories for 7 years
from the date of purchase against defects caused
by faulty workmanship and materials. During this
guarantee period Sage Appliances will repair,
replace, or refund any defective product (at the
sole discretion of Sage Appliances).
All legal warranty rights under applicable national
legislation will be respected and will not be
impaired by our guarantee. For full terms
and conditions on the guarantee, as well as
instructions on how to make a claim, please visit
www.sageappliances.com.
Care & Cleaning
Jug and Lid
To avoid food drying on blades, jug and lid,
follow the below steps as soon as possible
after use:
• Rinse most of the ingredients o the
jug and lid.
• Add 1L of warm water and 1–2 drops of
detergent and press the CLEAN button.
• Rinse the jug and lid again and/or wash
separately in warm soapy water with a soft cloth
or bottle brush.
WARNING
Oils in citrus rind can damage the material
of your jug if being exposed to it for a longer
period. Always clean your blender jug
immediately after processing citrus rind.
Motor base
To clean the motor base, wipe with a soft, damp
cloth then dry thoroughly. Wipe any excess food
particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleaners
on either the motor base or the jug, as they may
scratch the surface. Use only warm soapy water
with a soft cloth.
Dishwasher
The blender jug, tamper and lid can be washed
in the dishwasher on a standard wash cycle. Jug
can be placed on the bottom shelf, however the
tamper should be on the top shelf only.
2 Litre jug
To remove, clean the jug and lid using
the CLEAN instructions. Add 2 tablespoons
bicarbonate of soda and ½ cup (125mL) vinegar
into jug and let the mixture froth for 1 minute.
Scrub the jug and lid with the mixture using a
soft dishwashing brush. Add 2 cups warm water
and allow to stand for 5 minutes.
Attach jug to blender base. Secure lid and then
press the CLEAN button. Thoroughly rinse the
jug, and allow to air dry. Store jug and lid with
the lid o to allow air to circulate.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BBL820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BBL820 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info