617969

Sage BBL605 - the Kinetix Control Manual

16
Zoom out
Zoom in
Previous page
1/30
Next page
15
CARE & CLEANING
DISASSEMBLING YOUR BLENDER
FOR CLEANING
1. Always ensure the blender is off by
pressing the POWER button on the
control panel. Then switch off at the
power outlet and unplug the power
cord.
2. Remove the blender jug from the
motor base by grasping the handle
and lifting the jug in an upward
direction.
3. Remove the lid and wash as per care
and cleaning instructions.
REASSEMBLING YOUR BLENDER
JUG AFTER CLEANING
1. Ensure all parts are clean and
completely dry thoroughly before
placing blender jug onto blender
base.
CLEANING THE MOTOR BASE
Wipe the motor base with a soft, damp cloth
then dry thoroughly.
Wipe any excess food particles from the
power cord.
NOTE
Do not use abrasive scouring pads
or cleaners when cleaning the motor
base as they may scratch the surface.
CLEANING THE BLENDER JUG,
BLADES, LID AND INNER LID
Wash all parts in warm soapy water with
a soft cloth. Use a bottle brush to dislodge
stubborn foods around the blade assembly.
When cleaning the blender jug it is always
a good idea to clean straight away to avoid
food sticking to the blades and jug. Placing
about 200ml of warm soapy water into the
jug with the lid on and inner lid in place you
can blend this water for 5–10 seconds on
a low speed which will help clean the blades
and jug. Then rinse jug in cold water and
dry thoroughly.
NOTE
Blades are sharp please use care when
cleaning around the blades.
The blender lid may be washed in the
dishwasher on the top shelf only and on a
standard wash cycle. The blender jug may be
placed in the bottom shelf of the dishwasher
on a standard cycle only.
REMOVING STUBBORN OR STRONG
FOOD STAINS AND ODOURS
Strong smelling foods such as garlic, fish
and some vegetables such as carrots may
leave an odour or stain on the blender jug
and lid. To remove, soak blender jug and lid
for 5 minutes in warm soapy water. Then
wash with a mild detergent and warm water,
rinse well and dry thoroughly.
STORAGE
Store your blender upright with the blender
jug, lid and inner lid assembled and inserted
on the motor base or beside it. Do not place
anything on top.
WARNING
The blending blades are extremely
sharp. Avoid any contact with fingers
and hands. Use caution when handling
and storing.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BBL605 - the Kinetix Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BBL605 - the Kinetix Control in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info