617969

Sage BBL605 - the Kinetix Control Manual

11
Zoom out
Zoom in
Previous page
1/30
Next page
10
OPERATING YOUR NEW APPLIANCE
NOTE
Do not fill the blender jug above the
MAX line. When the blender jug is filled
at or near the MAX line place one hand
on the blender lid to avoid displacement
of the lid during operation.
6. Select the required speed (1 to 5) by
pressing the corresponding speed
button. The blender will start to
operate and the selected speed button
will illuminate. The POWER button
will illuminate and cease to flash.
The STOP button will illuminate
and flash. The LCD timer screen
will start counting upwards in one
second increments until 120 seconds
is reached.
NOTE
Operate the blender only for the
appropriate amount of time required –
do not over blend.
7. When 120 seconds is reached,
the blender will automatically
cease to operate and the selected
speed button and STOP button
illumination will go out. The
POWER button will illuminate and
flash. After a few seconds the LCD
timer screen will revert to ‘00’.
NOTE
•The Blender will automatically
stop blending after 120 seconds (2
minutes). This is a safety feature and
restricts wear on the motor.
•To stop blending at any time, press
the STOP button or the selected
speed button. The POWER button
can also be pressed, but this will
also turn the appliance off and all
illuminations will go out.
•The speed can be changed at any
time during the blending process.
Each time a new speed is selected
its button will illuminate and the
previous speed button illumination
will go out. The number of seconds
on the LCD timer screen will
continue to count upwards to 120
seconds unless interrupted.
8. The blender features two additional
pre programmed functions, ICE
CRUSH and SMOOTHIE and a
PULSE function. These two pre-
programmed cycles automatically
adjust the blending time and speeds
to optimise blending results. Select
the required function by pressing
the corresponding function button.
The blender will start to operate and
the selected function button will
illuminate. The POWER button will
illuminate and cease to flash. The
STOP button will illuminate and
flash. The LCD timer screen will start
counting backwards in one second
increments until ‘00’ is displayed.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BBL605 - the Kinetix Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BBL605 - the Kinetix Control in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info