767104

Safety 1st Safe Contact Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
EN
FR
DE
IT
ES
PT
NL
User guide
Thank you for buying the Safety 1st baby monitor «Safe Contact».
Please read these instructions carefully before using and keep them safe for future reference.
I - WARNINGS
Terms used in the instructions: the term «»receiver»» corresponds to the parent unit and the term «»transmitter»» corresponds to
the baby unit.
• In no case should this product be a replacement for adult supervision.
• Check the child’s activity at regular intervals because the baby monitor will not alert parents to silent activity.
• It is important to check reception quality regularly.
• The baby unit must be installed at least 20 cm away from any other person, in compliance with Council recommendation 1999/519/
EC.
• This baby monitor is designed for interior use only.
• Never use the baby monitor in a damp place or where it is liable to be splashed by water from a bath, basin, etc.
• Do not cover the appliance with objects such as blankets, tablecloths, curtains, newspapers, etc.
• Never place the appliance near to naked flames such as lighted candles.
• Keep the transmitter, receivers and adapters away from all sources of heat such as radiators, stoves and other appliances (including
amplifiers) which give out heat. Also keep these parts away from direct sunlight.
• Never use the appliance near to neon lights or any other electrical appliance such as televisions, computers or telephones using
DECT technology.
• Unplug the adapter from the wall socket if you are not using the appliance for a long period of time.
• Leave space between the transmitter, receiver and adapters to ensure there is adequate ventilation and to prevent any overheating
of the parts.
• Use only the adapters supplied (cf page 3). The use of other adapters could damage the transmitter and receiver. Do not use this
adapter with other products.
• Plug adapters only into standard electrical sockets (220 V). To avoid all risk of tangling and overheating, do not use the extension.
• Adapters may become slightly warm when the appliance is working. This is normal.
• Keep the adapter leads away from places where people pass, and out of the reach of children. Make sure that the cord is not stuck.
In particular, check the layout of electrical wires in the adapter plugs and electrical sockets, as well as the wiring connections to the
receiver, transmitter and adapters. Make sure that each power supply unit remains easily accessible.
• Check the batteries regularly when the receiver is being used in portable mode.
• Do not use the receiver in portable mode when the batteries are almost flat. If this is the case, plug the receiver into the mains in
order to use it.
• Do not attempt to repair this product. For all repairs, please contact the DOREL after-sales service.
WARNING :
To reduce the risk of fire or electrical disturbance, do not expose this product to water or humidity. Never dismantle the appliances.
All opening of the casing presents dangers and will nullify the guarantee.
Cleaning: use a dry cotton cloth to remove dust from appliances. Do not use water!
Keep mains adapters out of the reach of children (Supply cords present risk of strangulation).
The frequency range of this baby monitor is between 1881 MHz and 1898 MHz.
II - INSTALLING THE BABY MONITOR
Contents :
• 1 child unit
• 1 parent unit
• 2 adapters
• 2 rechargeable batteries NiMH 1.2V, 550mAh type AAA for the parent unit
• 1 user guide
1) Advice to obtain high quality reception:
The baby monitor is equipped with D.E.C.T (Digital Enhanced Cordless Telecommunication) digital technology. It is designed to
connect you automatically, using a private channel, while giving out a clear sound, without interference or parasites. Thanks to the
DECT technology, listening is not disturbed because the units connect up automatically on other channels if interference is detected.
IMPORTANT :
For better sound quality, place the transmitter 1.5/2 metres away from the baby. Check the reception regularly. Place the receiver far
enough away from the transmitter to avoid interference. It may be that the maximum distance has been reached if, when using the
baby monitor, the sound quality deteriorates. In this case you should move the receiver closer to the transmitter. Adjust the volume
to a reasonable level for your surroundings.
2) Using for the first time :
When you buy the product the rechargeable batteries are wrapped separately and are not already in the parent unit. It is necessary
to charge the batteries.
Installing the batteries in the parent unit :
- Press down and turn (See Diagram).
- Remove the battery cover from the parent unit and insert the rechargeable batteries, making sure they are the correct way round
as indicated. (See Diagram)
- Replace the battery cover.
Recharging and using from the mains
It is essential to fully charge the parent unit before using. You can use the parent unit while it is charging or, if you wish to speed up
the charging process, you can turn it off.
The indicator light on the parents’ unit flashes red when charging.
When you use the parent unit plugged into the mains, it is preferable to leave the batteries in the unit. Before first use, you need to
leave the parent unit plugged in for 8 hours in order for it to fully charge.
The baby unit works only from the mains.
Plug an adapter onto each unit.
WARNING: Use only the adapters supplied with the product.
Plug the adapter into a wall socket.
WARNINGS CONCERNING THE BATTERIES :
• Keep the instructions because they contain important information.
• Use only the rechargeable batteries NiMH 1.2V, 550mAh type AAA.
• DO NOT REPLACE THESE BATTERIES BY AN INCORRECT TYPE OF BATTERY: RISK OF EXPLOSION.
• DO NOT MIX used batteries with new batteries.
• DO NOT MIX alkaline batteries, standard (carbon-zinc) batteries and rechargeable (nickel-cadmium) batteries.
• Do not recharge non-rechargeable batteries.
• Before inserting the batteries, check that all contact surfaces are clean. 4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Safety 1st Safe Contact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Safety 1st Safe Contact in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info