768795
9
Zoom out
Zoom in
Previous page
1/32
Next page
sewn
end
1211
5. Fully Loosen Harness
Strap
Push down on harness release lever
(through opening on front of seat
pad) while pulling out on harness
straps as shown.
6. From Back of Seat,
Remove Harness
Strap Loops From
Splitter Plate
7. Pull Harness Strap Out of
Shoulder Harness Slots
8. Rethread Harness Strap
Into Correct Shoulder
Harness Slots For Your
Child
WARNINGS: Make sure that the harness height is
correct for your child’s size.
Do not use this child restraint rear facing unless
the top of your child’s head is at least 1 in. (2.5
cm) below the top of the child restraint.
Failure to follow these steps can result in serious injury or
death.
9. Attach 2nd Harness Strap
Loops to Splitter Plate
Sewn ends of the harness strap
loops MUST face towards you.
DO NOT twist harness strap or
harness adjustment strap.
Make sure the same harness strap
loops are fitted COMPLETELY ON
both sides of the splitter plate.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Safety 1st OnBoard 35LT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Safety 1st OnBoard 35LT in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info