767072
19
Zoom out
Zoom in
Previous page
1/32
Next page
35
D. General Vehicle Installation
Tighten Vehicle Belt
Push down firmly on the
child restraint and while
pulling on the shoulder belt
to tighten.
4.
Rebuckle Vehicle Belt
8.
9. Check Belt Tightness
Grasp the child restraint
at the belt path with one
hand. Push and pull the
child restraint from side
to side, forward and back.
The child restraint should
not move more than 1
inch.
NOTE: If it moves more than an inch, redo the steps 5 through
9 again or try another seating location.
Recheck the recline angle to make sure it is reclined
according to your child’s weight. Repeat steps if not
reclined correctly.
Remove the locking clip when the seat belt is not being
used with a child restraint. 36
Locate Locking Clip
Location
Grasp both vehicle belts
together just behind the
latch plate and unbuckle.
NOTE: If the latch plate
ends up just at the belt path
opening, grasp the belts
on the opposite side of the
child restraint, as close to
the latch plate as possible.
5.
Attach Locking Clip
Thread both portions of the
vehicle belt onto the locking
clip, as close to the latch
plate as possible.
6.
Position Locking Clip
Position locking clip about
1 in. (2.5 cm) from vehicle
belt’s latch plate.
7.
Thread Vehicle Belt
Thread the vehicle lap/
shoulder belt combination
through the rear-facing
belt slot.
2.
12
Pull Vehicle Belt Across
Child Restraint
Thread vehicle seat belt
under pad in front of
buckle strap to the opposite
side. Buckle vehicle belt.
Do not place vehicle belt
over child’s legs.
3.
NOTE: The buckle MUST be in the 1st or 2nd buckle strap
slots when rear-facing. Any slot can be used for
forward-facing.
4358-5836 Elite SF1 EOU.indd 37-384358-5836 Elite SF1 EOU.indd 37-38 12/17/13 4:44 PM12/17/13 4:44 PM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Safety 1st Alpha Elite 65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Safety 1st Alpha Elite 65 in the language / languages: English as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info