769722
55
Zoom out
Zoom in
Previous page
1/58
Next page
55
8 MAINTENANCE
Generally speaking the inset fire should undergo a thorough maintenance at least once a year if the appliance is
used frequently. We recommend carrying out smaller maintenance work such as removing ashes and cleaning
the glass at more regular intervals.
Removing ashes
The few ashes remaining following combustion form a protective layer between the bottom of the appliance
and the fire hearth. You furthermore extract the maximum energy from the fuel with “combustion in the
ashes”. You should thus always retain ± 1cm at the bottom. Ashes removed belong in the rubbish bag.
Cleaning the flue
Flue dust and ashes must be removed from the smoke
discharge duct every year. The smoke discharge duct can be
accessed by removing the baffle plate. This makes it easy to
remove the ashes from the discharge duct as well as the
connector. The baffle plate must remounted correctly
afterwards.
Sealings and fire bricks
Sealings and fire bricks are subject to wear and tear and need to be replaced periodically. How often depends
on how much you use your appliance. A principal rule is that the sealing needs replacement when it is
flattened, and the door no longer fits tightly against the front of the appliance. Fire bricks must be replaced
when they are worn thin, or when possible cracks are so wide that you can actually see steel through them.
Movable and mechanical parts (closing mechanisms, hinges etc) should be greased once a year with a heat-
resisting lubricant.
Cleaning painted surfaces
Dust the remaining ashes from the painted parts using a soft hand brush or cotton cloth. Never
wash the appliance with water! This can cause rust.
ATTENTION
The appliance may only be cleaned if it has fully cooled down.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saey High Line 80 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saey High Line 80 S in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info