769704

Saey Fenix Vitro Manual

34
Zoom out
Zoom in
Previous page
1/44
Next page
SAEY FENIX VITRO
34
v. 02 - 27062012 34
ENGLISH
6 INSTALLATION
All local regulations, including those referring to national and European standards need to be complied with when
installing the appliance.
Only an appliance connected by a qualified installer guarantees compliance with legislation on construction and fire
prevention. This is certainly required for safe and proper use of the inset fire.
Mounting of the frame
The frame is delivered separately and needs to be mounted prior to commencing the installation. The frame is to be
slided over the front of the inset fire and needs to be fixed with the 4 included bolts (M8).
Positioning
The appliance shall be erected on floors with an adequate loadbearing capacity (see technical data). If an existing
construction doesn’t meet this prerequisite, suitable measures shall be taken to achieve it.
The building construction must be protected against the risk of fire when installing the inset fire. A fireproof floor
must be used underneath the appliance (e.g. bricks). Use heat resistant insulation with a thickness of 15cm in relation
to combustible walls. Also make sure to respect the following safety clearance distances from combustible materials:
In the radiation range of the glass panel min. 100cm
When using cement inside or outside the chimney wait 7 days before using the inset fire. This allows the
cement to dry and prevents crack during the drying process.
Chimney and flue pipes
We guarantee the proper functioning of the appliance if the
chimney draught is between 12 and 20 Pa. If the chimney draught
is too high, then a damper must be incorporated.
If there isn’t enough chimney draught, then the following measures
can be considered:
Extending the chimney
Improving the insulation of the chimney (less cooling of the
flue gases)
Increasing the supply of combustion air into the space in
which the appliance is installed.
Improving the airtightness of the chimney
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saey Fenix Vitro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saey Fenix Vitro in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info