459485
13
Zoom out
Zoom in
Previous page
1/40
Next page
2524
CONTROLS AND MACHINE PARTS - SET UP SETTING UP THE MACHINE AND USE
Controls and machine parts - set up
1
Water tank
2
Green “ready” light
3
Main switch
4
Filter holder mounting
5
Coffee button
6
Steam button
7
Steam arm
8
Steam/hot water knob
9
Drip tray and grill
10
Cover
11
Power cord
12
Water tank funnel
13
Accessories box
Accessories
G
Filter holder
H
Doser
Set-up precautions
Before setting up the machine, heed
the following safety precautions:
place the machine in a safe place;
keep children away from the
machine;
do not place the machine on hot
surfaces or near open flames.
The machine is now ready to be set up.
Connection to the Power Supply
Electrical current can be dangerous,
therefore the safety precautions must be
rigorously respected.
T
he espresso machine should be
plugged into a suitable electrical
outlet only.
Make sure the power of the
electrical outlet corresponds to
the power indicated on the rating plate
of the machine.
Never use defective power cords
or plugs. Defective parts must be
replaced immediately by authorized
service personnel.
Warning! If an extension cord is used,
make sure that it has a minimum diameter
of 1 mm² and that it has a three-pole
outlet/ plug.
The voltage of the machine has been set
during production at the factory. Make
sure that the voltage of the power mains
corresponds to that on the rating plate
underneath the machine.
Make sure that the main switch (3) is in
the “0” position before plugging the
machine into the electrical outlet.
Packaging
The original box and packing materials
have been constructed specifically to
protect the machine during shipping. It is
recommended to keep the box and
packing materials for future shipping.
For your own safety and that of
others, carefully heed all safety
precautions indicated on pages 22 and 23.
Filling water tank
Remove the drip tray (9) and accesso-
ries box (13).
Remove the water tank by pulling it
our from the front of the machine.
Rinse the tank and fill it with fresh
water. Avoid overfilling the tank.
Replace the water tank. Make sure
the water tube hangs straight into the tank.
Do not bend the tube.
Replace the drip tray (9) and accesso-
ries box (13).
The water tank also can be filled without
removing the tank.
Simply pour water into the water tank fun-
nel (12).
Always fill water tank only with
fresh, non-sparkling water. Never
fill with hot water or other liquids that could
damage the tank.
Never use the machine without
water. Before turning the machine
on, always make sure that the water tank
is filled.
Priming the system
Before the first use of the machine, after a
prolonged period without use, whenever
the water tank has run completely dry, or
after drawing steam the system must be
primed.
Direct the steam arm on the drip tray.
Open the steam/hot water knob (8) until a
steady stream of water is dispensed. Close
the knob. Insert the filter holder (G) into the
brew head (4) to pre-heat the filter holder.
The machine is now ready to dispense
coffee.
Brewing espresso
Press the main switch (3) and wait for the
green light (2) to come on. This indicates
that the machine has reached the proper
temperature.
Put 1 or 2 doses of ground coffee in
the filter, without pressing it, in order to
obtain 1 or 2 espresso servings.
With the special “Crema” (G) filter holder
supplied with the machine it is not
necessary to change the filter for one or
two servings.
Insert the filter holder into the brew
head, turning from left to right until it locks
into place.
Release the handle of the filter holder.
The filter holder will automatically move
slightly to the left.
This movement guaran-tees the perfect
operation of the filter holder.
Place the one or two cups on the drip
tray (9) below the filter holder ensuring that
they are correctly positioned under the
coffee spouts.
Make sure that the green “ready” light (2)
is on then press the coffee button (5).
When the cups contain the desired
amount of coffee, press the coffee button
(5) to stop the dispensing.
Wait a few seconds, then remove the filter
holder and empty the used grounds.
Cleaning hint: keep the filter of the filter
holder clean by removing it and washing
it with water.
Choosing the quality of the coffee
As a general rule all types of coffee on the
market can be used, however, since cof-
fee is a natural product and its flavor chan-
ges according to its origin and blend, it is
advisable to try different types in order to
find the one that best suits your personal
tastes.
For the best results we recommend using
a blend which is specifically prepared for
espresso machines.
12
14
13
16
15
17
18
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saeco VIA VENEZIA ESPRESSO BLACK SIN006X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saeco VIA VENEZIA ESPRESSO BLACK SIN006X in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info