544810
28
Zoom out
Zoom in
Previous page
1/104
Next page
28
HOT WATER JET
6.2 Using the brass filter holder
Place the filter (19 or 20, single or twin
cup, depending on the number of
coffees you wish to make) in the brass
filter holder (18).
Fit the filter holder into the coffee outlet
socket (7), pushing it upwards and turning
it to the right until it locks into place.
Place a cup under the filter holder.
• To warm up the filter holder and the cup,
press the coffee switch (4); water will
begin to drip from the filter holder (this
operation is only necessary for the first
cup of coffee).
• When the cup is sufficiently full, press the
coffee switch (4) again.
Remove the filter holder from the
machine by turning it to the left.
By means of coffee filter-holder, take
one or two doses of ground coffee (par.
5.1), depending on the filter which has
previously been mounted.
Tamp the ground coffee in the filter holder
using the built-in tamper (21). Clean
excess coffee grounds from the rim of the
filter holder.
Fit the brass filter holder (18) into the
coffee outlet socket (7), as explained
above, pushing it upwards and turning it
to the right until it locks into place.
Position two warmed cups under the
filter holder, making sure that they are
directly under the coffee spouts.
Press the coffee switch. Wait until the cups
are sufficiently filled.
Press the coffee switch again to stop the
coffee flow.
When the coffee flow has ceased,
remove the filter holder and empty out
the excess coffee grounds.
Cleaning hint: when cleaning the
filter take it right out of the filter
holder and rinse thoroughly.
7 ADVICE ON CHOICE OF
COFFEE
Practically any type of ground coffee on the
market can be used with this machine.
Coffee is a natural product and its taste
varies, depending on its origin and blend.
It is therefore advisable to try a number of
different types to discover your own perso-
nal preference. For best results use blends
specifically ground for espresso machines.
The coffee flow should be constant and
should not drip. The speed of the coffee
flow can be regulated by changing the
dosage, the fineness of the grinding and/
or by how heavily you tamp down the coffee
in the filter.
BEFORE USING THE HOT WATER/
STEAM JET, MAKE SURE THAT THE
STEAM TUBE (“PANNARELLO”) IS
POSITIONED OVER THE DRIP TRAY.
8 HOT WATER JET
• If the machine is not already on, turn it on
at the main switch (3) which will light up.
Wait for the coffee switch, „machine
ready“ light (4) to come on.
Place a cup or a glass tea cup under
the steam tube (“Pannarello”).
Open the “Hot water/steam knob (6),
turning it in anti-clockwise direction
and press the coffee switch (4) to start
the water flow.
•To stop the water flow, press the coffee
Com004a 165925900 Rev01.pmd 13/07/2003, 18.3028
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saeco RI9347 Via Veneto - COM 004 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saeco RI9347 Via Veneto - COM 004 A in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info