111659
16
Zoom out
Zoom in
Previous page
1/76
Next page
• 16 •
4 INSTALLATION
For your and other people safety, follow the "Safety
Regulations" in section 3 carefully.
4.1 Packaging
The original packaging has been designed to protect the
machine during transport. We recommend keeping the
packaging for future transport.
4.2 Installation Instructions
Before installing the machine, read the following safety
instructions carefully.
Put the machine in a safe place.
Make sure children cannot play with the machine.
Do not place the machine on hot surfaces or near open
ames.
The coffee machine is now ready to be connected to the
power supply.
Note: it is recommended to wash the components
before using them for the rst time and/or after
they have not been used for a certain period of time.
4.3 Machine Connection
Electric power can be dangerous! It is therefore
essential to follow the safety regulations
carefully. Do not use faulty cords! Faulty cords and
plugs must be immediately replaced by authorized
service centres.
Appliance voltage has been pre-set by the manufacturer.
Make sure that the power voltage matches the indications
on the identi cation plate on the bottom of the appliance.
Make sure that the ON/OFF button (2) is not pressed
before connecting the machine to the power supply.
• Fit the plug into a wall socket with suitable power
voltage.
4.4 Water Tank
(Fig.1) - Remove the water tank (3).
(Fig.2) - Rinse the water tank and ll it with fresh drinking
water taking care not to over ll it.
(Fig.1) - Reinsert the water tank into its seat and make
sure that it has been placed correctly.
Use only fresh, non-sparkling drinking water to
ll the tank. Hot water, as well as any other liquid,
may damage the tank. Do not turn on the machine with
empty water tank: make sure there is enough water in
the tank.
4.5 Circuit Priming
When the machine operates for the rst time and when
all the water has been dispensed, the machine circuit
needs priming. In this case, the 4 buttons of the control
panel will ash at the same time.
(Fig.3) - Press the ON/OFF button (2). The 4 buttons will
ash.
(Fig.4) - Place a container under the cappuccinatore.
(Fig.5) - Open the "hot water/steam" knob (4) by turning
it anticlockwise.
(Fig.6) - Press the hot water button (17).
Wait for water dispensing to stop.
Close the "hot water/steam" knob (4) by turning it
clockwise. Remove the container.
When the rst priming ends, the warming up
starts. Before brewing coffee, water and steam,
please wait for lights 15 and 16 to be permanently on.
The machine is now ready to brew coffee and dispense
steam. Please see related sections for operating details.
Note: if priming is not completed, the 4 buttons
will keep on ashing. The machine cannot be
used.
4.6 Drip Tray Adjustment
The drip tray can be adjusted according to the cup size.
To adjust the drip tray height, do as follows.
(Fig.24) - Lift the drip tray and remove the grill.
(Fig.25) - Remove the support under the drip tray.
(Fig.26 - 27) - Rotate the support and place it in the coffee
machine.
(Fig.28) - Put the drip tray on the support and replace the
grill.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saeco Nina Bar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saeco Nina Bar in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info