660263
29
Zoom out
Zoom in
Previous page
1/40
Next page
• 29 •
Machine Installation - Service Provider Manual
10 MACHINE PROGRAMMING
All the operations described in chapter 10 must
be performed exclusively by the service provider
or a specialised technician, who shall organise
all the operating steps and use only suitable means to en-
sure strict compliance with the safety regulations in force.
The specialised technician or the service provider can change
some of the machine operating parameters to suit the needs of
the users.
10.1 Accessing the Programming Mode
Proceed as follows to access programming mode.
1
With the machine turned on, press and hold the
button (22) and the
button (23) at the same time for 5
seconds.
2
The following screen is displayed:
YELLOW
3
Press the button (21) to access programming mode.
Note: The above mentioned procedure can only be
used to access the programming menu when the
machine has reached operating temperature. To execute
certain programmes (e.g. DESCALING), the machine will
manage the procedure automatically and warm up ac-
cording to the manufacturer's settings.
Note: After 3 minutes of inactivity, the machine
will exit programming mode and return to stand-
ard operating mode.
The menus should be PASSWORD-protected.
The PASSWORD will not be requested if set on the
default value (0000). It should be changed upon
1
st
use to prevent unauthorised access. After this change,
it should be entered again at each access, every time the
display shows:
P S W
CONFIRM
0 0 0 0
YELLOW
Refer to section 10.4 on how to set the PASSWORD.
To enter the password:
1
Press the " " (18) or " " (20) button to set the desired
number.
2
Press the button (24) to move on to the next number
(when it gets to the end it will start again from the beginning).
3
Repeat steps 1 and 2 until the set password has been entered.
4
Press the button (21) to con rm and to access pro-
gramming mode.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saeco Lirika at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saeco Lirika in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info