660263
10
Zoom out
Zoom in
Previous page
1/40
Next page
• 10 •
Machine Use - User Manual
3.3 Turning on the Machine
Warning! Connection to the power supply should
be carried out exclusively by the service provider!
Before turning on the machine, ensure that the plug is correctly
inserted in the power socket.
1
To turn on the machine, move the power button on the back
of the machine to "I" (Fig.02, page 3).
2
After carrying out a check cycle, the machine goes into
Stand-by mode and the "
" button (21) blinks.
3
To turn on the machine simply press the " " button (21).
Note: Once the warm-up is complete, the machine
performs a rinse cycle of the internal circuits. A
small amount of water is dispensed during this process.
Wait for this cycle to be completed.
3.4 Warm-up and Rinsing
1
Upon start-up, the machine activates the warm-up phase.
Wait until it is completed.
YELLOW
Note: The progress bar indicates that the machine
is warming up the system.
2
Once the warm-up is complete, the machine performs a rinse
cycle of the internal circuits.
YELLOW
Note: The progress bar indicates that the machine
is performing the rinse cycle of the system.
3
A small amount of water is dispensed from the co ee dis-
pensing spout. Wait for the cycle to end.
Note: The cycle can be stopped by pressing the "
" button (18).
4
When completed, the machine is ready for use.
GREEN
Note: If the machine is being used for the  rst
time or after a long period of inactivity, contact
the Service Provider to start it up.
3.5 Rinse/Self-Cleaning Cycle
This cycle allows the internal co ee circuits to be rinsed with fresh
water. The cycle is carried out:
At machine start-up (with cold boiler);
After priming the circuit (with cold boiler);
During the Stand-by preparation phase (if at least one co ee-
based product has been brewed);
When turning o the machine, after pressing the "
"
button (21) (if at least one co ee-based product has been
brewed).
A small amount of water will be dispensed to rinse and heat all
the machine parts; in this phase this icon is displayed.
YELLOW
Wait for the cycle to  nish automatically. The dispensing process
can be stopped by pressing the " " button (18).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saeco Lirika at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saeco Lirika in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info