570408
10
Zoom out
Zoom in
Previous page
1/56
Next page
• 10 •
Machine Use - User Manual
3.2 Warm-up and Rinsing
1
Upon start-up, the machine activates the warm-up phase.
Wait until it is completed.
HEATING UP…
Note: The bar is in progress to show that the ma-
chine is heating up the system.
2
Once the warm-up is complete, the machine performs a rinse
cycle of the internal circuits.
RINSING
ESC
STOP RINSING
Note: The bar is in progress to show that the ma-
chine is performing the rinse cycle of the system.
3
A small amount of water is dispensed. Wait for the cycle to
end.
Note: The cycle can be stopped by pressing the
" " button (23).
4
Then, the machine is ready for use.
The logo is displayed indicating that the machine is ready for use.
Note: If the machine is being used for the  rst
time or after a long period of inactivity, contact
the Service Provider to start it up.
3.3 Rinse/Self-Cleaning Cycle
This cycle enables rinsing the internal co ee circuits with fresh
water. The cycle is carried out:
At machine start-up (with cold boiler);
After priming the circuit (with cold boiler);
During the stand-by preparation phase (if at least one co ee-
based product has been brewed);
When turning o the machine, after pressing the "
"
button (25) (if at least one co ee-based product has been
brewed).
A small amount of water will be dispensed to rinse and heat all
the machine parts; in this phase this icon is displayed.
RINSING
ESC
STOP RINSING
Wait for the cycle to  nish automatically. The dispensing process
can be stopped by pressing the " " button (23).
3.4 Eco-friendly: Stand-by
The machine is designed for energy saving. The machine auto-
matically turns o after 30 minutes of inactivity.
Note:
- During the turning o phase, the machine performs a
rinse cycle, if a co ee product has been brewed.
- Time can be programmed according to your needs
(contact the Service Provider).
To turn the machine on again, simply press either button on the
control panel (if the power button is set to "I"). In this case the
machine will go through the rinse cycle only if the boiler is cold.
3.5 Adjusting the Dispensing Spout
Most of the cups on the market can be used with this co ee ma-
chine.
The height of the dispensing spout may be adjusted to better  t the
dimensions of the cups that you wish to use.
Manually move the dispensing spout up or down to adjust its
height.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saeco Au Lika SUP040R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saeco Au Lika SUP040R in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Saeco Au Lika SUP040R

Saeco Au Lika SUP040R User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info