Only start the engine when you are standing behind the mower.
Always place the mower on a level area which is not covered with high grass (if the
grass is too high it will block the cutter bar start-up and make starting the mower more
difficult). When the engine is started, the machine must not be tilted on end, if
necessary it must be tilted by pressing the guide bar down so that the cutting tool is
pointing in the direction away from the user, but only as far as absolutely necessary. As
long as the mower has not been lowered to the ground again, both your hands must be
on the top part of the bar.
Pos: 16.5 /Innenteil/Inbetriebnahme des Accu/Ele ktro-Mähers/Vertikutierers/Starten des Motors Text Accu-Mäher @ 46\mod_1476437080317_1521.docx @ 520910 @ @ 1
– Open the battery cover and keep hold of it.
– Insert the safety key G2 .
– Close the battery cover. Make sure that the cover closes automatically. Dirt and
grass cuttings can prevent this and must be removed for this reason.
– To switch the motor on, press the start button and keep it pressed A2 .
– Use the other hand to pull the control handle towards the top part of the handlebar.
During operation, the control handle must remain held in this position.
– The start button can then be released.
Pos: 16.14 /Inside/Putting the electric mower/scarifier into operation/Motor does not start up after 5 seconds note mower @ 13\mod_1280933201843_6.docx @ 110722 @ @ 1
Pos: 16.6 /Innenteil/Inbetriebnahme des Accu/Elektro-Mähers/Vertikutierers/Motor läuft nicht an nach 5 Sekunden Hinweis Accumäher @ 46\mod_1476437274823_1521.docx @ 520937 @ @ 1
IMPORTANT
If the motor does not start up within 5 seconds of the tool being switched on or a
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sabo R43B at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sabo R43B in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.
The manual is 3,57 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
