Pos: 23.2 /Innenteil/Störungsursachen und deren Beseitigung/1 STÖRUNGSURSACHEN UND DEREN BESEITIGUNG @ 0\mod_1115373523343_1521.docx @ 1904 @ 1 @ 1
18TROUBLESHOOTING
Pos: 23.3.1 /Innenteil/Störungsursachen und deren Beseitigung/Störungstabellenelemente/1 Tabellenkopf @ 0\mod_1115374760156_1521.docx @ 1884 @ @ 1
Fault Possible cause Remedy
Pos: 23.3.2 /Innenteil/Störungsursachen und deren Beseitigung/Störungstabellenelemente/Motor startet nicht Accumäher @ 46\mod_1476709391225_1521.docx @ 521487 @ @ 1
Motor does not start up
Safety key not inserted.
Insert safety key G2 .
Battery not charged.
Charge battery W1 .
Battery is not functional
or cannot be charged.
Replace battery.
Cutting height set to low
(if the grass is too high it
will prevent the motor
starting up).
Set higher cutting height I .
Tilt the mower during start-
up.
Excessive grass waste in
the housing or ejection
channel.
Clear the cutting
chamber/ejection channel of
grass, keep the gap between
fan and housing clean
(remove the safety key first).
Have it checked by an
authorised workshop.
Pos: 23.3.3 /Innenteil/Störungsursachen und deren Beseitigung/Störungstabellenelemente/Akustisches Signal Accumäher @ 47\mod_1477288759681_1521.docx @ 522341 @ @ 1
An acoustic signal
sounds
The charge status of the
battery is below 10%.
Charge battery W1 .
Battery is not functional
or cannot be charged.
Replace battery.
A
coustic signal sounds
although the battery is
charged: technical defect
of the mower
Have it checked by an
authorised workshop.
Pos: 23.3.4 /Innenteil/Störungsursachen und deren Beseitigung/Störungstabellenelemente/Motor schaltet beim Mähen aus Accumäher @ 46\mod_1476710744093_1521.docx @ 521514 @ @ 1
Motor switches off
during mowing
Cutting height too low.
Set higher cutting height I.
Battery is empty Charge battery W1 .
Excessive grass waste in
the housing or ejection
channel.
Clear the cutting
chamber/ejection channel of
grass, keep the gap between
fan and housing clean (remove
the safety key first K2 ).
Pos: 23.3.5 /Innenteil/Störungsursachen und deren Beseitigung/Störungstabellenelemente/Motorleistung lässt nach Accumäher @ 46\mod_1476770223958_1521.docx @ 521541 @ @ 1
Motor power
decreasing
Cutting bar blunt. Have it sharpened and
balanced by an authorised
workshop Q .
Low battery capacity Charge battery W1 .
Excessive grass waste in
the housing or ejection
channel.
Clear the cutting
chamber/ejection channel of
grass, keep the gap between
fan and housing clean (remove
the safety key first K2 ).
Pos: 23.3.6 /Innenteil/Störungsursachen und deren Beseitigung/Störungstabellenelemente/Starke Erschütterungen (Vibrieren) @ 0\mod_1115377318234_1521.docx @ 1900 @ @ 1
Extreme vibration
Have it checked by an
authorized dealer
Pos: 23.3.7 /Innenteil/Störungsursachen und deren Beseitigung/Störungstabellenelemente/Schnitt unsauber, Rasen wird gelb, Elektro @ 0\mod_1125904144842_1521.docx @ 1899 @ @ 1
Unclean cut, lawn is
yellow
Blade blunt. Have it sharpened and
balanced by an authorized
dealer Q .
Cutting height too low. Adjust to higher cutting height
I .
Mowing too fast. Adjust mowing speed.
Insufficient overlapping
of cuts when mowing.
Tall grass conditions may
dictate that more overlapping
of cuts is required.
Lawn becomes matted. A lawn scarifier can remedy
the problem considerably
Pos: 23.3.8 /Innenteil/Störungsursachen und deren Beseitigung/Störungstabellenelemente/Auswurf verstopft, Elektro TurboSinal @ 0\mod_1125903118742_1521.docx @ 1887 @ @ 1
Ejection blocked
Turbo signal has not
been detected
J + K .
Empty the grass collector L .
Cutting height too low for
grass that is too high.
Adjust to higher cutting height
I .
Pushing mower too fast. Adjust mowing speed.
Grass not dry. Let grass dry.
Pos: 23.3.9 /Innenteil/Störungsursachen und deren Beseitigung/Störungstabellenelemente/Batterie lässt sich nicht laden Accumäher @ 46\mod_1476770614490_1521.docx @ 521568 @ @ 1
Battery cannot be
charged
Charging contacts short-
circuited by dirt or
objects.
Have it checked by an
authorised workshop.
Battery or charger faulty Replace battery or charger.
Charger without power
supply
Use another electrically
powered device to check
whether the socket is OK.
Battery too hot Allow the battery to cool
down for about 30 minutes.
Pos: 23.4 /Innenteil/Störungsursachen und deren Beseitigung/Störungsursachen und deren Beseitigung Text Benzin @ 0\mod_1115378183390_152 1.docx @ 1905 @ @ 1
In case of faults and defects which have not been listed here, please contact the
nearest authorized dealer.
Repairs which require specialized knowledge should only be performed by a qualified
expert. Your authorized dealer will naturally also be glad to help if you do not wish to
perform the maintenance work described here yourself.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sabo R40B at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sabo R40B in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.
The manual is 3,57 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.