661041

Sabo 47-EL VARIO Manual

59
Zoom out
Zoom in
Previous page
1/91
Next page
13
GB
Collapsing the handle (Illustration A1 )
– To save storage space or for transportation, loosen the four wing nuts such that the handlebar can be folded together
without resistance in Z-shape above the engine A1 .
The toothed fitments on the lower end of the bar must snap out of the recess on the housing.
– Do not kink nor squeeze the cables.
CAUTION
When the bar is moved for transport and storage purposes, it may fold over unintentionally during loosening of the
wing nuts and release of the toothed fitments from the recesses on the housing. In addition, squashing spots can
occur between the base and top of the bar and the housing. This may result in risk of injury!
Transporting and securing the equipment (Illustration N )
– If the equipment has to be carried, do not hold the ejection flap! Hold the front and rear part on the handle
(see illustration N ).
Pay attention to the weight of the equipment before you lift or carry the equipment (see Technical data). Lifting heavy
loads can cause health problems.
We recommend that the equipment be always lifted or carried by at least two people.
– Transport the equipment in the upright posture.
– Park the means of transportation on level ground so that the equipment cannot roll away before it is secured
– Hang out the collection bag and secure it separately during transportation
– Secure the equipment with approved load-strapping means (e.g. tie-down straps with clamping elements) on or inside
the vehicle. Tie-down straps are belt bands made of synthetic fibres. Every tie-down strap is designated. The label
contains important details for application
– For loaded goods that can roll, it is recommended to use direct strapping with four belts. Secure the equipment on the
wheels so that it does not move during transportation.
ATTENTION
Do not tighten the belts too firmly. Fixing the equipment too firmly can cause damages.
Maintenance of the blade
A sharp blade guarantees the optimum cutting performance. Check the condition and firm seating of the blade before every
use. A worn or damaged blade must be replaced immediately.
Sharpening and balancing the blade (Illustration Q )
WARNING
The sharpening and balancing of the blade should be carried out only by an authorized specialist workshop, since
according to the applicable standard DIN EN 60335, an insulation test must always be carried out following repairs
or maintenance work to insulating components (e.g. blade screws).
An improperly sharpened or unbalanced blade can cause severe vibrations, and damage the lawnmower.
IMPORTANT
When balancing pay attention to the 2.9g threshold value.
The cutting edges of the cutting blade may be grinded only until the respective value (see Figure Q ) or the marking (1) on
the cutting blade (ring) has been reached. Attention! Observe the grinding angle of 30°.
Your professional workshop can check this value - (grinding limit) for you!
WARNING
A blade by which the wear limit (marking) has been exceeded can break off and spin away; this can cause severe
injuries.
Replacing the blade
WARNING
Always have the replacement of the blade bar carried out by an authorised specialist workshop, since according to
the applicable standard DIN EN 60335, an insulation test must always be carried out following repairs or
maintenance work to insulating components (e.g. blade screws).
The blade bar can also become detached if the blade coupling is assembled incorrectly, which can lead to severe
injuries.
– Only use original blades for replacement purposes (Order no. see original spare parts and accessories).
– Blades must be indelibly marked with name and/or trademark of the manufacturer or supplier and with the parts number.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sabo 47-EL VARIO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sabo 47-EL VARIO in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info