544404
63
Zoom out
Zoom in
Previous page
1/85
Next page
English - 61 -
After APS is nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Channel Search
In manual channel scan, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For each valid channel number, signal
level and signal quality are shown on the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press
or
button to select Clear Service List and then press OK. The
following OSD message will be displayed on the screen:
Highlight NO and press OK to cancel. Select Yes by
pressing “ ” or button and press OK to delete all
of the channels.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlight First Time
Installation” menu item and press “OKbutton, then
you will be asked whether or not to delete the settings.
Selecting “Yes” by pressing OKbutton while “Yes” is
highlighted will delete the existing channel table.
Then you will be asked to conrm for deleting all
channels and settings:
By selecting Yes and pressing the OKbutton, the
existing channel table will be deleted. After factory
settings are loaded, “First Time Installation menu
will be displayed.
The menu which is displayed for language selection
appears on the screen at rst. By using
or
buttons, select the desired language option, and press
OK button to activate.
Afterwards, “First time installation” OSD will appear
on the screen. By pressing “
” or buttons, select
the Country you want to set and press OKbutton
(* only for EU countries).
Press the OKbutton to start installation. After search
is completed for digital channels, a message asking
whether to search for analogue channels appears
on the screen.This process is same as described in
Automatic Search section..
Media Browser
To display Media Browser window, press either
MENU button on the remote control and then
select Media Browser by pressing or button.
Press OKbutton to continue. Media Browser menu
contents (depending on the contents of your USB
drive) will be displayed.
Also, when you plug a USB device, the following
screen will be displayed:
Select YES by pressing “ ” or ” button and press
OK button. Media browser will be displayed.
You can play music, picture and video les from a
USB memory stick.
Note: If you plug USB stick while in analogue mode, the TV
will automatically switch to digital TV mode.
Note: Some USB compliant devices may not be supported.
Note: If the USB stick is not recognized after power off/on
or First Time Installation, rst, plug the USB device out and
power off/on the TV set. Plug the USB device in again.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saba SCB1910VX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saba SCB1910VX in the language / languages: English, French as an attachment in your email.

The manual is 13,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info