577193
20
Zoom out
Zoom in
Previous page
1/38
Next page
English
20
Note:
When you choose LNB type “Universal”, you
cannot modify 22K.
10.1.1.4 0/12V (Optional)
You can use [/] key to switch “0V / 12V”.
When this item switches to “12V”, receiver
will receive TV and radio input signal from
12V port. If the item switches to “0V”, the
receiver will receive all signals from 0V port.
10.1.1.5 Power
In “Polarity” item, [/] key to switch or
press [ENTER] key to enter list for selection
among "OFF" , "13", "18", "13/18", "13.5",
"18.5" and "13.5/18.5".
10.1.1.6 Motor
Motor: In “motor” item, you can press [/]
key to switch “OFF/ DiSEqC 1.2 / USALS
Functions.
In “Satellite” item, press [/] key to switch
satellite that you want to scan or press
[ENTER] key to enter satellite list for
selection.
10.1.2 Edit TP
When you enter to “Transponder” menu,
there will display the screen like below:
1. In Transponder” menu, you not only can
use [/] key to select transponder but also
can use [Add] and [Delete] functions.
When you press [GREEN] key, it will
display “New TP” in “Transponder”
menu; You should set the parameters of
“Frequency” and “Symbol Rate” for this
new transponder. The parameters of “TP
Frequency and “Symbol Rate” can set
by number keys. The available range are
“3000~13450 MHz” and
“1000~45000Ks/s”.
When you press [yellow] key, it will
display Edit TP menu,you could rejigger
the parameters of TP
When you press [blue] key, there will
show up a warning message for
reminding whether you will delete the
current transponder or not. If you select
“Yes”, the current transponder will be
deleted, and the total account of
transponder will reduce 1
correspondingly.
2. For the existed transponder, you also
can use number keys to modify the
parameters of “TP Frequency” and “Symbol
Rate”.
3. When you complete your modification,
Press [RED] key, it will show up a dialog to
ask you scan mode, program type, scan type
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Unix F plus Solo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Unix F plus Solo in the language / languages: English as an attachment in your email.

The manual is 7,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SAB Unix F plus Solo

SAB Unix F plus Solo User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info