485239
11
Zoom out
Zoom in
Previous page
1/42
Next page
11
2. Installation
2.1 Antenna setup
2.2 Motor Setup
Satellite : Select any satellite by pressing  keys.
(Press blue key to edit the name of the satellite)
Transponder : Select a transponder.
LNB Type : Dual / Universal, Single, OCS, Wideband, Digiturk
MDU1, Digiturk MDU2.
LNB Frequency : Select a proper LNB frequency.
(Press blue key to input local frequency)
UNICABLE : Select a unicable channel.
DiSEqC 1.0 & 1.1 : Select between “None or “DiSEqC1.0 A, B, C, D “ and
DiSEqC1.1 1 ~ 16”.
Polarity Control : Select one out of “14/18V”, “0/12V”, “0/22KHz”.
0/12V Switch : Select between “OV”, and “12V”.

0/22KHz Switch
: Select between “0KHz, “22KHz”, Auto.
Note
Make sure to save searched channels before exit.
Press YELLOW button to initialize satellite value.
After Antenna setup, you can move to Auto search menu with RED button.
Note
Setting DiseqC 1.2
1. Select DiseqC 1.2 in the Motor setup menu.
2. Select satellite.
3. Move motor until you see good signal.
4. After searching satellite, SAVE current position.
5. Repeat this operation for other satellites.
6. Go to Auto search menu with RED key.
Setting USALS
1. Select USALS in the Motor setup menu
2. Enter longitude and latitude value
3. Save current setting in move control
4. Move motor to current satellite position and
check signal.
5. Go to Auto search menu with RED key
You can Select "None", "DiSEqC1.2", or "USALS" by pressing  keys.
Motor Type : Select a motor type by pressing  keys.
(Press blue key to edit the name of the satellite)
Satellite : Select a Satellite.
Transponder : Select a transponder.
2.2.1 Setting up DiSEqC1.2
In the Motor Setup Menu, select the DiSEqC1.2 then the following menu will be
displayed.
Satellite : Select a satellite by pressing  keys.
(Press blue key to edit the name of the satellite.)
Transponder : Displaying current TP value.
Nudge Size : Motor move step (1-5).
Move Coarse : Move west ( key), Move east( key).
Move Fine : Move by the value of Nudge size.
Motor Contro l : GOTO, SAVE, GOTOREF.
Limit Setup : Setting limit.
- EAST LIMIT : Conrming the setting of East Limit.
- WEST LIMIT : Conrming the setting of West Limit.
- DELETE LIMIT : Delete the setting of East & West Limits.
MANUAL_DigiLine 7000HD_Eng_091119.indd 11 2009-11-20 �� 10:34:56
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Ultimedia 8000HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Ultimedia 8000HD in the language / languages: English as an attachment in your email.

The manual is 10,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SAB Ultimedia 8000HD

SAB Ultimedia 8000HD User Manual - Dutch - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info