577219
10
Zoom out
Zoom in
Previous page
1/39
Next page
Connecting Your System
TV with Motorized System (DiSEqC 1.2)
y Connect one end of RCA cable to the RCA jack on the back of the STB and the
other end to a RCA jack on your TV.
y Or connect one end of Scart cable to the Scart jack on the back of the STB and the
other end to a Scart jack on your TV.
y Connect one end of your coaxial cable to the LNB IN connector on the STB and the
other end to the REC or Receiver connector on the DiSEqC 1.2 motor.
y Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2
motor.
There are two ways to connect the STB to your existing TV system.
We recommend using one of the following cases for the best result
All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible.
This allows multiple antennas to be connected to the STB at the same time.
If you have two or more fixed antennas or LNBs, then we recommend you use a
DiSEqC 1.0 switch.
Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector
of the DiSEqC switch.
Do the same for any other LNBs that you have.
Connect one end of a coaxial cable to the RF output connector of the DiSEqC
switch, connect the other end to the LNB IN socket on the STB.
To the digital receiver, you can connect either a single satellite antenna directly or
LNB of multi-feed equipment.
Reference
DiSEqC 1.0/1.1/1.2 Connection
System Connection
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Safir FTASC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Safir FTASC in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SAB Safir FTASC

SAB Safir FTASC User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info