670247
69
Zoom out
Zoom in
Previous page
1/80
Next page
User
User
Manual
Manual
For Windows & Mac OS
Indoor HD Wireless IP Camera
V1.0
Model: SABIP1600
1
1
Table
Table
of
of
Contents
Contents
Table
Table
of
of
Contents
Contents.................................................................................................................................................................. 1
1 Overview.......................................................................................................................................................................... 3
1.1 Key Features........................................................................................................................................................3
1.2 Read Before Use.................................................................................................................................................4
1.3 Package Contents...............................................................................................................................................4
1.4 Physical Description........................................................................................................................................... 4
1.5 SD Card................................................................................................................................................................ 5
1.6 Hardware Installation..........................................................................................................................................5
2 Access the IP Camera................................................................................................................................................... 6
2.1 Hardware Connection.........................................................................................................................................6
2.2 Access the Camera in LAN................................................................................................................................7
2.3 Access the Camera in WAN............................................................................................................................10
2.3.1 Static IP Addresses.................................................................................................................................. 10
2.3.2 Remote Access......................................................................................................................................... 11
2.4 Using the VLC player....................................................................................................................................... 14
2.5 IP Camera Connection to the Server.............................................................................................................17
3 Surveillance Software GUI..........................................................................................................................................17
3.1 Login Window.................................................................................................................................................... 18
3.2 Modify the Username and Password............................................................................................................ 18
3.3 Setup Wizard..................................................................................................................................................... 19
3.4 Surveillance Window........................................................................................................................................ 21
4 Advanced Camera Settings........................................................................................................................................ 26
4.1 Status.................................................................................................................................................................. 26
4.1.1 Device Information................................................................................................................................ 27
4.1.2 Device Status......................................................................................................................................... 27
4.1.3 Session Status....................................................................................................................................... 28
4.1.4 Log........................................................................................................................................................... 28
4.2 Basic Settings....................................................................................................................................................29
4.2.1 Camera Name........................................................................................................................................29
4.2.2 Camera Time..........................................................................................................................................29
4.2.3 User Accounts........................................................................................................................................ 30
4.2.4 Multi-Camera..........................................................................................................................................33
4.2.5 Status Light.............................................................................................................................................37
4.3 Network...............................................................................................................................................................37
4.3.1 IP Configuration..................................................................................................................................... 37
4.3.2 Wireless Settings...................................................................................................................................39
4.3.3 DDNS.......................................................................................................................................................41
4.3.4 UPnP........................................................................................................................................................46
4.3.5 Port...........................................................................................................................................................46
4.3.6 Mail Settings........................................................................................................................................... 48
4.3.7 FTP Settings...........................................................................................................................................50
4.3.8 P2P.......................................................................................................................................................... 52
2
2
4.3.9 Cloud Server...........................................................................................................................................52
4.4 Video................................................................................................................................................................... 53
4.4.1 Video Settings........................................................................................................................................ 53
4.4.2 On Screen Display................................................................................................................................ 54
4.4.3 Snapshot Settings................................................................................................................................. 54
4.4.4 IR LED Schedule................................................................................................................................... 55
4.5 Detector.............................................................................................................................................................. 56
4.5.1 Motion Detection....................................................................................................................................56
4.5.2 Sound Detection.................................................................................................................................... 59
4.6 Record.................................................................................................................................................................60
4.6.1 Storage Location....................................................................................................................................60
4.6.2 Alarm Recording.................................................................................................................................... 61
4.6.3 Local Alarm Recording......................................................................................................................... 61
4.6.4 Scheduled Recording........................................................................................................................... 62
4.6.5 SD Card Management..........................................................................................................................63
4.8 Firewall................................................................................................................................................................64
4.9 System................................................................................................................................................................ 65
4.9.1 Back-up& Restore................................................................................................................................. 65
4.9.2 System Upgrade....................................................................................................................................65
4.9.3 Patch Installation................................................................................................................................... 67
4.9.4 Factory Reset.........................................................................................................................................67
4.9.5 Reboot..................................................................................................................................................... 67
5 Playback.........................................................................................................................................................................68
6 Appendix........................................................................................................................................................................ 69
6.1 Frequently Asked Questions........................................................................................................................... 69
6.1.1 Install the add-on of Firefox browser, Google Chrome and IE Chrome.......................................70
6.1.2 Uninstall the add-on of Firefox browser, Google Chrome and IE Chrome..................................73
6.1.3 I have forgotten the administrator password.................................................................................... 74
6.1.4 Camera can not record.........................................................................................................................74
6.1.5 Subnet doesn’t match........................................................................................................................... 75
6.1.6 No Pictures Problems........................................................................................................................... 75
6.1.7 Can’t access IP camera in internet.....................................................................................................76
6.1.8 UPnP always failed............................................................................................................................... 76
6.1.9 Camera can not connect wireless...................................................................................................... 76
6.1.10 Can’t see other cameras listed......................................................................................................... 76
6.2 Default Parameters...........................................................................................................................................77
6.3 Specifications.....................................................................................................................................................77
6.4 CE & FCC...........................................................................................................................................................78
3
3
1 Overview
Indoor HD Wireless IP Camera with P2P is an integrated wireless IP Camera with a color CMOS sensor
enabling viewing in High Definition resolution. It combines a high quality digital video camera, with a powerful
web server, to bring clear video to your desktop and mobile devices from anywhere on your local network or
over the Internet.
Thanks to the P2P easy access technology, you don’t need to do complicated Port Forwarding and DDNS
settings, you just need to scan the QR code of the camera to connect it on smart phone, or input the UID on
CMS software to do remote access.
The IP Camera gives users more comprehensive control over a monitored site. The camera supports H.264
video compression technology, dramatically reducing file size and saving network bandwidth.
The camera is based on the TCP/IP standard. There is a WEB server inside which could support Internet
Explore. Therefore the management and maintenance of your device is simplified by using the network to
access the website of your camera.
The camera is designed for indoor surveillance applications such as home, retail store and office. Controlling
the camera and managing images are simplified by using the provided web interface across the network
utilizing wired or wireless connectivity.
The IP camera provides Smart Phone APP for Android and iPhone users, then you can view your camera
anywhere, anytime on your smart mobile devices.
1.1 Key Features
Standard H.264 video compression algorithm to satisfy the transmission of high definition video in narrow
bandwidth network
P2P feature for easy access
Megapixel HD video
Supports IE/Firefox/Google/Safari browser
Supports WEP,WPA-PSK and WPA2-PSK Encryption
Wireless connection is compliant with IEEE 802.11b/g/n Wi-Fi, up to 150Mbps
IR night vision (Range: 8m)
Supports image snapshot
Supports dual-stream
Supports SD Card storage up to 32GB
Supports IR-Cut auto switch
Embedded free DDNS(dynamic domain name service) Service
Supporting the Third Party Domain Name Service
Supports two-way audio
Multi-level users management with password protection
Supports Motion detection alert via email or upload image to FTP
4
4
Supports Sound Detection via FTP and Email
Providing free Android and iPhone APP for viewing live video
Support record schedule
Supports EZlink, Link to WiFi network easily
1.2 Read Before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the IP Camera is installed, please carefully read and follow the instructions in the Quick Installation
Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly
as intended.
1.3 Package Contents
IP Camera × 1
DC Power Adapter × 1
USB Power Cable × 1
CD×1
Quick Installation Guide × 1
1.4 Physical Description
5
5
1.5 SD Card
NOTE:
This camera supports SD Card and the max size of SD card must be under 32G.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the
SD Card may be cannot work well.
The default storage path of alarm record files is SD card, when the available size of SD card is less than 256M,
the old record files will be deleted automatically.
1.6 Hardware Installation
1. Rotate the base of the camera until points a and bare aligned, this allows for the mounting plate to be
removed.
2. Install the mounting plate on a wall or ceiling with supplied fixing screws.
3. Align points a and b to insert the camera base to the mounting plate. Rotate so that points a and b are no
longer aligned, this attaches the camera securely to the base.
6
6
2 Access the IP Camera
This chapter explains how to access the camera through browser.
2.1 Hardware Connection
1. Connect the camera to the LAN network (Router or Switch) via network cable.
2. Connect the power adapter to the camera.
3. Insert the CD into the CD drive of your computer.
4. Go to the folder “Equipment Search Tool” and find the folder “For Windows OS”or “For Mac OS”. Copy and
paste the Equipment Search Tool file to your computer, or drag it onto your Desktop.
Shortcut icon for Windows / Mac OS
7
7
2.2 Access the Camera in LAN
This camera supports HTTP and HTTPS protocols, you can access the camera by two ways.
(1) http:// LAN IP + HTTP Port NO.
The default HTTP port no is 88. Double click the Equipment Search Tool icon to run, and it should find the
camera’s IP address automatically after you plug in the network cable.
Figure 2.1
Double click the IP address of the camera; your default browser will open to the camera login page.
(2) https:// LAN IP + HTTPS Port NO.
The default Https port no is 443. You can use the url to access the camera: https:// LAN IP + HTTPS port.
Go to Settings - Network - Port panel , you can see and change the http and https port no.
Figure 2.2
HTTPS(Hypertext Transfer Protocol over Secure Socket Layer) is a safe way to access your camera, the data
transferred on the Internet will be encrypted. Since we can not apply license for every LAN or DDNS URL, the
webpage may pop up a warning like the following picture, you just need to click 'Continue to this website (not
recommended). '
8
8
Open Internet Explorer if it is not already opened. Click on Tools, then click Internet Options.
Next, click the Security tab, then click the Trusted sites button.
Figure 2.3
For Firefox, you can add the trusted as the following way:
9
9
Tools ---- Options ---- Advanced --- View Certificates --- Servers
Figure 2.4
Click View Certificates, and go to Servers option.
Figure 2.5
Go to Add Exception panel.
10
10
Figure 2.6
2.3 Access the Camera in WAN
2.3.1 Static IP Addresses
Users who have static IP addresses do not need to set DDNS service settings for remote access. When you
have finished connecting the camera using the LAN IP address and port forwarding, you can access the
camera directly from the Internet using the WAN IP address and port number.
How to Obtain the WAN IP address from a public website
To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The
webpage at this address will show you the current WAN IP.
Enter the camera’s url , here
take https://192.168.8.129:443
for example .
11
11
Figure 2.3
Access your IP Camera from the Internet
You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port number
in your standard browser. For example, you would enter http:// 183.37.28.254:85
NOTES:
Make sure port forwarding is successful. You can do port forwarding two ways.
1) Login to your router to enable the “UPNP” function. You can then login to the camera as administrator,
choose Network, and then choose UPnP to enable UPnP. Make sure that the status of UPnP reads “UPnP
Successful” on the Device Status page.
2) Do port (HTTP port and Media port) forwarding manually.
If your router has a Virtual Server, it can do port forwarding. Add the camera’s LAN IP and port which you had
set earlier to your router’s port forwarding settings.
If you plug the camera into a router, it will have a dynamic IP address and you need to set DDNS service
settings to view it remotely.
2.3.2 Remote Access
If you want to access your camera by web browser outside of your LAN, you need to configure following
configurations.
1. Choose “Settings” on the top of the camera web page, then go to the “Network > IP Configuration” section
on the left side of the screen, then uncheck the Obtain IP DHCP.
12
12
2. Enable UPnP and DDNS in the camera’s settings page. We recommend you to use the DDNS by factory
default.
3. You can see the port of your camera here. If you want to set Remote Access for several cameras on the
same network, you will need to change the HTTPS port for each camera.
IP Address: Set this in the same subnet
as your computer , or keep it as default.
Subnet Mask: Keep it as default.
Gateway and DNS Server: Set it to the
IP address of your router.
Select Yes and click Save.
Click Enable DDNS and click Save.
The content in the Manufactures DDNS
column is the domain name of your camera.
13
13
4. If the UPnP of the router has been enable, you do not need to perform following steps. Otherwise, you
need to select one of the following methods to configure port forwarding on your router. For these steps, we will
be using the TP-LINK brand wireless router as an example.
If there is a UPnP function in your router
Choose “Forwarding > UPnP”, make sure that the Current UPnP Status is Enabled.
If there is no UPnP function in your router
You need to manually add port forwarding, refer to the following steps. You need go to the “Forwarding >
Virtual Servers” panel for setup.
Click Add New.
14
14
5. Now you can access your IP camera by https://domain name: HTTPS port via the Internet.
2.4 Using the VLC player
This camera supports RTSP streaming, here you can view the camera using VLC player.
RTSP URL rtsp:// [user name][:password]@IP: port number/videosream
The part in the square brackets may be omitted.
user name & password: The user name and password to access the camera. This part can be omitted.
IP: WAN or LAN IP address.
port number: If there is the RSTP port number on the Port page, you must only use RTSP port number.
otherwise, you must only use HTTP port number.
Videostream: Here support three mode: videoMain, videoSub and audio. When the network speed is bad, here
you had better select videoSub. If you select audio, you can only hear the sound but cannot see the video.
For example:
IP: 192.168.1.11
HTTP Port number: 88
User name: admin
Input the port and IP address of
your camera and click Save.
Here you have finished the
Port Forwarding setup.
15
15
Password: 123
Here I can enter one of the following URLs in the VLC.
1) rtsp://admin:123@192.168.1.11:88/videoMain
2) rtsp:// @192.168.1.11:88/videoMain
3) rtsp://:123@192.168.1.11:88/videoMain
4) rtsp://admin@192.168.1.11:88/videoMain
Open the VLC, and go to MediaOpen Network Stream option, then enter the URL into VLC.
Figure 2.9
16
16
Figure 2.10
Sometimes you may need to enter the user name and password again. Click OK and you can see the
real-time preview.
Figure 2.11
17
17
Figure 2.12
If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation
Guide about How to configure port forwarding.
NOTE:
If you modify the camera’s username or password, you had better reboot the camera, or else the
new username and password cannot take effect when you enter the authentication in the VLC.
2.5 IP Camera Connection to the Server
Device supports ONVIF2.2.1 protocol,You can easily access the NVR with ONVIF or server with ONVIF.
3 Surveillance Software GUI
Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick
installation, you can take time to learn the operation of the software.
18
18
3.1 Login Window
Figure 3.1
Please check the login window above, it was divided to 5 sections from no. 1 to 4.
Section1 Enter the User name and password
The default administrator username is admin with a blank password, please reset the password at first using
and prevent unauthorized users login the camera.
Section2 Stream
The camera supports two stream modes: Main stream and sub stream. If you want to access the camera form
LAN, here you can select Main stream. If you want to access the camera from Internet, here we recommend
sub stream.
Note: When the network bandwidth is badly you’d better select Sub Stream and the video will be more fluency.
Section3 Select the language
You can select the language you need via click on the language drop-down list to switch.
Section4 Login the camera
Click Login button and you will see the surveillance windows.(If login the camera for the first time, the page that
modify the username and password will appears.)
3.2 Modify the Username and Password
When you log in for the first time, it will come to the operating of modify the username and password
automatically.
2
3
4
1
19
19
Figure 3.2
Enter the New Username, New password and Confirm the password.
Click Modify button, you will see the login page again.
3.3 Setup Wizard
After logging in for the first time, you will be directed to theSetup Wizardautomatically. Here you can set
the basic parameters of camera, such as camera name, camera time, wireless settings, IP configuration.
Figure 3.2
Camera Name: You could give a name for your IP camera.
Figure 3.3
20
20
System Time: Select the time zone you need to set the date, time,format, etc.
Figure 3.4
Wireless networks: Click Scan, find the SSID of your wireless router, select and enter the password.
Figure 3.5
IP: Set the IP address of the camera. You could choose to obtain an IP automatically (DHCP) or set the IP
address manually according to your needs.
21
21
Figure 3.6
NOTE:
It takes about 1 minute to connect the camera to your router.
3.4 Surveillance Window
Figure 3.7
Section1 LiveVideo / Settings/Playback buttons
: Path to surveillance window. Click this button and back to the surveillance window
: Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and
22
22
do advanced settings.
: Click this button and back to the Playback panel to view the stored audio files stored in the
SD Card.
Section2 Multi-Device Window
The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You
can add other cameras in multi-device setting.
Section3 Mode/ Stream / Mirror/ Flip buttons/Zoom
Mode
1) 50HZ ---------Indoor surveillance (Region: Europe, China)
2) 60HZ ---------Indoor surveillance (Region: USA, Canada)
3) Outdoor------Outdoor surveillance
Stream
The default stream supports multiple modes, For example: HD Mode/720P/30fps/2M meanings: Stream type /
Resolution / Maximum frame rate/ Bit rate. (Different models support different specific mode. )
1) Stream type : It is used to identify the stream type.
2) 720P/ VGA
The bigger the resolution, the better of the image quality is. If you are accessing the camera via internet and
want to get more fluent video streaming, please select resolution VGA.
3) Maximum frame rate
When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the
maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the
frame rate above 15, you can achieve fluently video. The maximum frame rate for each model is different,
please see the “Specifications”.
4) Bit rate
Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should
combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will
lead to video can not play well.
You can reset the stream type on Settings-> Video-> Video Settings panel.
23
23
Figure 3.8
After changing, please re-login the camera and you can see the modification.
Section4 IR LED Lights
Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule.
Auto: Select it and the camera will adjust the infra led (on or off) automatically.
Manual: Select it and you can turn on or turn off the infrared led manually.
Schedule: Select it and the IR led light will be off at the schedule period. If you want to define or change the IR
led lights schedule time, please go to Settings--->Video---> IR LED Schedule page.
Section5 Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
24
24
Section6 OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to Settings ---Basic settings---Camera name panel, and you can change another device name. The
default device name is anonymous.
Go to Settings ---Basic settings---Camera time panel and adjust the device time.
Go to Settings ---Video---On Screen Display panel, you can add or no add OSD.
Section7 Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button
1 ----- Play Click it to play the video of the camera
2 ----- Stop Click it to stop the video of the camera
3 ----- Talk Click the button and the icon will become to , then talk to the microphone that connected
with PC, people around the camera can here your voice. Click the icon again and stop talking.
4 ----- Audio Click this icon, the icon will become to you can hear the sound around the camera by the
earphone or speakers that connected with PC.
5 ----- Snapshot Click it to make snapshot and it pop-up a window which picture you snapshot, right click in
the window and save the picture to anywhere you want.
6 ----- Record Click the icon and the camera start recording, you can see a green dot in the live
window. Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the
storage path: Go to Settings- >Record->Storage Location panel.
7 ----- Full Screen Click it to make full-screen, or you can double click the surveillance screen to make
full-screen. Double click again and exit full-screen.
Onscreen Mouse Control
Right click the mouse and you can adjust the screen ration, full screen and Zoom up.
1
2
3
5
6
7
4
25
25
Figure 3.10
Keep ration: Select it and the camera will adjust the size of live window based on the the computer monitor
automatically. Sometimes there is a black border around the video, please select Keep ration to get a better
visual quality .
Full Screen: Select it and Click it to make full-screen, press ESC and exit full-screen.
Zoom up:
First Method: Here is a convenient and fast solution to Zoom up/down screen by Clicking Video Screen
and adjusting Mouse pulley, or by press the CTRL key and click the mouse left button.
Second Method: Click it and the live view will be digital zoomed up, then click Zoom Down and the live view
back to original size.
Figure 3.11
When you select the Full Screen, then click right mouse, there is a Screen PTZ button.
26
26
Figure 3.12
Click the Screen PTZ button and put the mouse on the screen to indicate the camera move direction you
prefer, press the left mouse, the camera will move to the corresponding direction. Loosen the mouse and stop
moving. Press Esc button or double click right mouse and cancel the function.
NOTE:
For Mac OS, the plugin cannot support Onscreen Mouse Control, so you cannot allow to use it.
4 Advanced Camera Settings
Click the button Settings”, goes to Administrator Control Panel to make advanced camera settings.
4.1 Status
Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you
various information about your camera.
27
27
4.1.1 Device Information
Figure 4.1
Camera Model: The camera model no.
Camera Name: The Device Name is a unique name that you can give to your device to help you identify it.
Click Basic Settings and go to Camera name panel where you can change your camera name. The default
device name is anonymous.
Camera ID: Display the wired MAC address of your camera. For example Device ID is 000C5D00008, the
same MAC ID sticker is found at the bottom of the camera.
Camera Time: The system time of the device. Click Basic Settings and go to Camera time panel and adjust
the time.
Application Firmware Version: Display the application firmware version of your camera.
Plug-In Version: Display the plug-in version of your camera
System Firmware Version: Display the System Firmware version of your camera.
4.1.2 Device Status
On this page you can see device status such as Alarm status/ Record Status ,DDNS status ,WIFI status and so
on.
28
28
Figure 4.2
4.1.3 Session Status
Session status will display who and which IP is visiting the camera now.
Figure 4.3
4.1.4 Log
The log record shows who and which IP address accessed or logout the camera and when.
29
29
Figure 4.4
Reboot the camera and clear the log records.
4.2 Basic Settings
This section allows you to configure your camera’s Name, Time, Mail, User account and Multi-Device.
4.2.1 Camera Name
Default alias is anonymous. You can define a name for your camera here such as apple. Click Save to save
your changes. The alias name cannot contain special characters.
Figure 4.5
4.2.2 Camera Time
This section allows you to configure the settings of the internal system clocks for your camera.
Click the page number and go to the
corresponding page to see more logs.
Fill in one page number, click Go button
and go to the corresponding page.
30
30
Figure 4.6
Time Zone: Select the time zone for your region from the drop-down menu.
Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server.
Choose the one that is closest to your camera.
Sync with PC: Select this option to synchronize the date and time of the Network Camera with your computer.
Manually: The administrator can enter the date and time manually. Note select the date and time format.
use DST: Select the use DST, then select the daylight saving time from the drop-down menu.
Click Save button and submit your settings.
4.2.3 User Accounts
Here you can create users and set privilege, visitor, operator or administrator. The default user account is
admin, with a blank password. You can enter the users accounts of visitor operator and adminstrator
Manually.
31
31
Figure 4.7
How to change the password of administrator?
Firstly, select the account of administrator, then select “Change password”, enter the old password and the
new password, lastly click modify to take effect.
Figure 4.8
How to add account ?
Select one blank column, then enter the new user name, password and privilege, last click Add to take effect.
You can see the new added account on the Account list.
32
32
Figure 4.9
Figure 4.10
DeleteSelect the account which you want to delete, then click Delete button to take effect.
NOTE:
The default admin account cannot be deleted, but you can add other administrator users.
33
33
4.2.4 Multi-Camera
If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the
main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do
multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if
there is 8 cams installed.
The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. This
page you can both add MJPEG and H.264 series cameras to the first camera and view multi-surveillance
screen on one window.
Add cameras in LAN
In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the default one. You
can add more cameras in the list in LAN for monitoring. The camera’s software supports up to 9 IP Cameras
online simultaneously. Click The 2nd Device and click the item in the Device List in LAN, the Alias, Host and
Http Port will be filled in the boxes below automatically. Enter the correct username and password then click
Add. Add more cameras in the same way.
Figure 4.11
Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which
series the camera belongs to.
1 Click it, camera model, alias,
host and HTTP Port will be
filled in the following boxes
automatically
2 Enter the User name and
password of the 2nd camera
3 Click Add to take effect
34
34
Figure 4.12
Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added.
Figure 4.13
35
35
Figure 4.14
Add cameras in WAN
If you want to view all cameras via the internet(remote computer), you will need to add them using DDNS
domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (Read
How to configure DDNS settings)
Login to the first camera using a DDNS domain name and port.
Figure 4.15
Use DDNS domain name
and port to login.
Make sure each camera you need
add could login with DDNS name
and port.
36
36
Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera’s name, DDNS domain name,
port number. Enter user name and password and then choose Add. (Figure 4.19)
Figure 4.16
1----- The camera model: MJ or H264.
2----- The 2nd camera’s name
3----- Fill in the 2nd camera’s DDNS host not LAN IP
NOTE: The MJ series have the same HTTP Port no. and Media Port no.
4---- Enter the 2nd camera’s user name and password
5---- Click Add button and to take effect
NOTE: Here the Host must be entered as the second camera’s DDNS domain name, not its LAN IP.
37
37
Figure 4.17
Return to video window. You will see all of the cameras accessible through the internet.
When you are away from home, you can use the first camera’s DDNS domain name and port to view all the
cameras via internet.
4.2.5 Status Light
You can enable or disable status light.
4.3 Network
This section will allow you to configure your camera’s IP, DDNS, Wireless Settings, UPnP and Port.
4.3.1 IP Configuration
If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same
subnet of your router or computer.
38
38
Figure 4.18
Changing settings here is the same as using the Equipment Search Tool.
It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If
you don’t know the subnet mask, gateway and DNS server, you can check your computer’s local area
connection as follows:
Control Panel
Network Connections
Local Area Connections
Choose Support
Details.
Figure 4.19
Click here
39
39
Figure 4.20
If you don’t know the DNS server, you can use the same settings as the Default Gateway.
4.3.2 Wireless Settings
Step 1: Choose Settings on the top of the camera interface, and go to the Network panel on the left side of
the screen, then click Wireless Settings.”
Click the Scan button and the camera will detect all wireless networks around the area. It should also display
your router in the list.
Set the same Subnet Mask
and gateway of the camera
with your PC.
There are two DNS servers,
you can set any of them.
Same with gateway is also
40
40
Figure 4.21
Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network,
such as the name and the encryption, will be filled into the relevant fields automatically.
You will only need to fill in the password of your network. Make sure that the SSID, Encryption and the
password you filled in are exactly the same for your router.
Figure 4.22
Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable.
Never shut down the power of the camera until the IP camera is able to connect to the wireless network.
Click the Page number to see other wireless
networks devices if there are more than 10.
1 Click the SSID of your
router and the relevant
information will be filled in
the fields automatically.
2 Enter the password of
your router
Click the Scan button
to search for wireless
networks.
41
41
The LAN IP address will disappear on the window of Equipment Search Tool when the camera is configuring a
wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of
the camera will show again on the window of the Equipment Search Tool. The IP address may have changed
after the camera receives a wireless connection; we recommend setting a static local IP address if this IP
address changes by right clicking the camera in Equipment Search Tools, setting a static IP, and pushing OK
(see Figure4.36).
Congratulations! You have set up the wireless connection of the camera successfully.
NOTE:
If you fail to make a wireless connection, please refer to your seller or contact us directly for
assistance.
WPS (Wi-Fi Protected Set-up)
Step 01) Press and hold the WPS button for two seconds.
Step 02) Press the WPS button on your router within 60 seconds. The WPS button is usually on the back or
side of your router. On some routers, you may need to log in to the web interface and click on an on-screen
button to activate the WPS feature. If you are not sure where the WPS buttons is on your router, please refer to
your router’s User Manual.
The camera will automatically create a secure wireless connection to your router. If you have plugged in the
network cable, please plug it out. The Equipment Search Tool will search the camera’s LAN IP. Make sure the
PC and the camera share the same subnet.
NOTE:
The security mode of router cannot be WEP, or else the WPS settings may be failed.
4.3.3 DDNS
Each camera has embedded a unique DDNS domain name when producing, and you can directly use the
domain name, you can also use the third party domain name.
Ip camera domain name
Here take a33471.myipcamera.org for example. Go to option of DDNS on the Settings->Network panel, you
can see the domain name.
42
42
Figure 4.23
Now you can use http:// Domain name + HTTP Port to access the camera via internet.
Take hostname a33471.myipcamera.org and HTTP Port no. 800 for example, the accessing link of the
camera via internet would be http:// a33471.myipcamera.org:8000
Restore DDNS to factory: If you have configured Third Party DDNS successfully, but you want to use
Manufacturer’s DDNS again , here click this button and start Manufacturer’s DDNS Service.
Third Party Domain Name Settings
User can also use third part DDNS, such as www.no-ip.com, www. 3322.com
Here take www.no-ip.com for example:
Step 1, Go to the website www.no-ip.com to create a free hostname
Firstly: Login on www.no-ip.com and click No-IP Free to register.
43
43
Figure 4.24
Figure 4.25
Click here to register
44
44
Please register an account step by step according to instructions on www.no-ip.com
After registration, please login your email which used to register. You will receive an email from website, please
click the link to activate your ACCOUNT as indicated in email.
Secondly: Login the link with the registered username and password to create your domain name.
Figure 4.26
45
45
Figure 4.27
Please create the domain name step by step according to instructions on www.no-ip.com
Step 2, DO DDNS Service Settings within the Camera
Please set DDNS Settings within the camera by hostname, a user name and password you’ve got from
www.no-ip.com
Take hostname ycxgwp.no-ip.info, user name ipcamera, password ipcamera2012 for example.
Firstly, goes to option of DDNS Settings on the administrator panel.
Secondly, select No-Ip as a server..
Thirdly, fill ipcamera as DDNS user, fill password ipcamera2012 as DDNS password, fill ycxgwp.no-ip.info
as DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the
DDNS settings effective.
Fourthly, after the restart, login the camera, and go to option of Device Status on the administrator panel, and
check if the DDNS status is successful.
If failed, please double check if you have input the correct hostname, user name, and password, and
try to redo the settings.
NOTE:
If you have set Third Party DDNS successfully ,the Domain Name will be invalid. The Third Party DDNS and
the Domain Name cannot work at the same time, the last time you configured will take effect.
Do port forwarding within the router
Example: The cameras LAN IP address is http://192.168.8.100:2000 , Media port no. is 9200.
Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue
Server on some brands of router). Take Linksys brand router as an example, Login the router, and goes
to Applications & Gaming->Single Port Forwarding.
Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the router showed
as below.
Figure 4.28
Assign a name
as you like here
Fill the Media Port no. of the
camera on the column of
External Port and Internal Port
46
46
Use domain name to access the camera via internet
After the port forwarding is finished, you can use the domain name+ http no. to access the camera via
internet. Take hostname ycxgwp.no-ip.info and http no. 2000 for example, the accessing link of the camera
via internet would be http:// ycxgwp.no-ip.info:2000
4.3.4 UPnP
Figure 4.29
The default UPnP status is closed. You can enable UPnP, then the camera’s software will be configured for
port forwarding. Back to the “Device Status” panel, you can see the UPnP status:
Figure 4.30
The camera’s software will be configured for port forwarding. There may be issues with your routers security
settings, and sometimes may error. We recommend you configure port forwarding manually on your router.
4.3.5 Port
This camera supports HTTP Port / HTTPS Port/ ONVIF Port. HTTP Port is used to access the camera remotely.
If you want to access the camera and view the video.
HTTP port : By default, the HTTP and Media port is set to 88. Also, they can be assigned with another port
number between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21.
47
47
Figure 4.31
Another way to change the HTTP port NO.
Step 1: Open the Equipment Search Tool, select the camera you would like to change the port of, right click on
the IP address, and click on ”Network Configuration”, this brings up the network configuration box as shown in
Figure 4.35 and 4.36.
Figure 4.32
Figure 4.33
Modify the Http Port .
Enter the Username and
password, click OK.
Select which camera
you’d like to change the
port for, and right click .
48
48
Step 2: Enter the username and password of the Administrator (default username is admin with a blank
password), and click “OK” to apply changes.
Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it
was changed to 2000, so we see http://192.168.1.110:2000 in Equipment Search Tool. Also, the LAN IP
address is now fixed at a static IP address of http://192.168.1.110:2000 . This IP address will not change even
if the camera is powered off and back on, the camera will remain on this LAN IP address. This is very important
that a static LAN IP address is set, or you may have problems later with remote access and seeing the camera
remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static
LAN IP address!
Figure 4.34
If the camera cannot be accessed, please make sure the port forwarding is succeed.
ONVIF port: By default, the ONVIF port is set to 888. Also, they can be assigned with another port number
between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports.
HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS port.
RTSP port: The default port is 554. Only some IP Cameras have RTSP port.
4.3.6 Mail Settings
If you want the camera to send emails when motion has been detected, here Mail will need to be configured.
49
49
Figure 4.35
1----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually
set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually
is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be
set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you
select.
2-----SMTP Username/ password ID account and password of the sender email address
3----- Sender E-mail Mailbox for sender must support SMTP
4----- Receiver Mailbox for receiver need not support SMTP,you can set 4 receivers
5---- Save Click Save to take effect
6---- Test Click Test to see if Mail has been successfully configured.
Click Test to see if Mail has been successfully configured.
50
50
Figure 4.36
If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test
mail.
If the test fails with one of the following errors after clicking Test, verify that the information you entered is
correct and again select Test .
1) Cannot connect to the server
2) Network Error. Please try later
3) Server Error
4) Incorrect user or password
5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try
again
6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server
8) The server does not support the authentication mode used by the device
4.3.7 FTP Settings
If you want to upload record files and images to your FTP serveryou can set FTP Settings.
Test result
51
51
Figure 4.37
Figure 4.38
FTP server: If your FTP server is located on the LAN.
If you have an FTP server which you can access on the internet.
Port: Default is port 21. If changed, external FTP client program must change the server connection port
accordingly.
FTP Mode: Here supports two modes: PORT and PASV.
Username/password: The FTP account and password.
Click Save to take effect.
Click Test to see if FTP has been successfully configured.
52
52
4.3.8 P2P
Access the IP Camera by Smart Phone (Android or iOS operating system)
First of all, you need to open the P2P function of the IP Camera at “Settings-->Network-->P2P”.
Figure 4.39
4.3.9 Cloud Server
Cloud Server: IP camera support dropbox which is network disk to store record files and images. You can
upload the record files and images to dropbox from your IP camera.
You need to configure the cloud server information to store the recording files.
Figure 4.40
Enable cloud server: you can check it to enable the cloud server.
Click the Get Authorization Code button, then you will enter the dropbox website. After signed in your
dropbox’s account, you will get the authorization code, copy it and paste to the Authorization Code textbox.
Then click the Accept button. You will see the status at the Status Information textbox. When the Status
Information display “status:set config ok”, click the Save button.
Note: You must plug the SD card into the camera before using the cloud storage feature.
53
53
4.4 Video
This section allows you to configure Video stream settings, On screen display and Snapshot settings.
4.4.1 Video Settings
There are two ways to set the stream video settings. They are main stream video settings and sub stream
video settings.
Figure 4.41
Enhanced Night video Definition: The camera will automatically drop the frame to extend the recording time
in the night.
Stream Type: There are four types to identify different streams you have set. If select the HD Mode, the
clearer video will become, and it will take up more bandwidth; If select the Smooth Mode, the bandwidth is very
narrow, and bit rate is large, that will lead to video can not play well. The Equilibrium Model is a value between
HD Mode and Smooth Mode.
Resolution: The camera supports multiple types, For example: 960P, 720P, VGA, QVGA. The higher the
resolution is, the clearer video will become. But the code flux will become larger too, and it will take up more
bandwidth.
Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate
configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate
54
54
is large, that will lead to video can not play well.
Frame Rate: Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the
maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should
lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve
fluently video. The maximum frame rate for each model is different, please see the “Specifications”.
Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the more
likely you will get a better video quality, but at the cost of higher network bandwidth consumption.
Variable bitrate: Select the Bit rate type to constant or variable. If select Yes, the camera will change the video
bit rate according to the situation, but will not more than the maximum parameter "Bit Rate"; If select No, the Bit
Rate is unchanged.
4.4.2 On Screen Display
This page is used to add time-stamp and device name on the video.
Figure 4.42
Display Timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on the
video.
Display Camera Name: There are two options: Yes or NO. Select Yes and you can see the device name on
the video.
4.4.3 Snapshot Settings
On this page you can set the snapshot pictures’ image quality and the storage path.
55
55
Figure 4.43
Manual snap Quality: Low, Middle and High. The higher the quality, the picture will be clearer.
Pictures Save To: FTP or SD card. If you have done FTP and Alarm settings, when alarming, the camera will
snap pictures to the FTP or SD card automatically. If you select the FTP, you can set
the file name which the picture save to.
Enable timing to capture
To enable capture interval, follow the steps below:
1 Select Enable timing to capture
2 Capture interval:The interval time between two captures.
3 Select the capture time
Capture anytime
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will capture.
Specify an capture schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all
column of TUE turns to red, that means during Tuesday whole day, the camera will capture.
Press the left mouse and drag it on the time boxes, you can select the serial area,
4 Click Save button to take effect.
4.4.4 IR LED Schedule
On this page you can set the schedule time for switching IR LED lights. When parameter Mode is set to the
Schedule on the Live Video window, at these schedule time, the IR LED lights will be turned off.
56
56
Figure 4.44
4.5 Detector
4.5.1 Motion Detection
IP Camera supports Motion Detection Alarm,when the motion has been detected, the IP Camera will make a
alarm.
Figure 4.45
To enable action detection, follow the steps below:
Step 01: Enable action detection
57
57
Step 02: Sensitivity---- It supports five modes: Lowest, Lower, Low, Medium and High. The higher the
sensitivity, the camera will be more easily alarmed. Select one motion sensitivity.
Step 03: Trigger interval--- The interval time between two motion detection.
Step 04: Select the alarm indicator
There are some alarm indicators:
A Camera Sound and PC Sound
if you select Camera Sound or PC Sound, when the motion has been detected, the people around the camera
will hear beep alarm sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in
Video->Snapshot settings panel.
D Recording
If you select this checkbox, when the motion has been detected, the camera will record automatically and store
the record files to the SD Card. Make sure the camera has inserted SD card and you have set the SD card as
the Alarm record files storage path, please go to Record—> Storage location page to verify this settings.
The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm Record
page and change the alarm time settings.
Capture interval: The interval time between two pictures.
Step 05: Set detect area
Click set detect area and it pop up a window, then you can draw the detection area. Click OK button after
settings. When something moving in the detection area, the camera will alarm.
58
58
Figure 4.46
Step 06: Alarm Schedule
Alarm anytime when motion is detected
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will alarm.
Figure 4.47
Specify an alarm schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all column
of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the
camera will alarm.
Click this button and select all time range
59
59
Figure 4.48
Press the left mouse and drag it on the time boxes, you can select the serial area.
Figure 4.49
Step 07: Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the camera will alarm and
adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.
4.5.2 Sound Detection
When the ambient sound over a certain decibel ,the sound alarm will be triggered.
60
60
If the Sensitivity is set to “High”, the camera will detect the sound whose more than 55db.
If the Sensitivity is set to “Medium”, the camera will detect the sound whose more than 65db.
If the Sensitivity is set to “Low”, the camera will detect the sound whose more than 75db.
If the Sensitivity is set to “Lower”, the camera will detect the sound whose more than 85db.
If the Sensitivity is set to “Lowest”, the camera will detect the sound whose more than 95db.
About the other operation of the sound detection, please refer to the Motion detection”.
4.6 Record
This section will allow you to change the record files storage path and the record time.
4.6.1 Storage Location
On this page you can change the alarm and manually recording storage path.
61
61
Figure 4.50
Recording Location: SD card , FTP , SD card and cloud.
When the camera alarmed, it will store the alarm files to the SD card,FTP or cloud. Make sure the camera has
been inserted the SD card. On this page, you can see the available space of the SD card.
Local Recording Location: For Windows OS, the location recording path is c:/ IPCamRecord, you can
change another one. For MAC OS, the manual recording path is: / IPCamRecord.
Enter the local folder: Click here, You can enter the local storage folder.
4.6.2 Alarm Recording
This page you can change the Pre-record time and Alarm record time.
Figure 4.51
The default Pre-recorded time is 5s and the alarm record time is 30s, you can change another time, click Save
button to take effect.
4.6.3 Local Alarm Recording
This page you can enable the local alarm record and Local Alarm record time.
62
62
Figure 4.52
4.6.4 Scheduled Recording
On the page you can configure the schedule record.
When the parameter Recording Location is set SD Card on the Storage Location page, you can configure
parameters as shown in follow figure.
Figure 4.53
When the parameter Recording Location is set FTP on the Storage Location page, you can configure
parameters as shown in follow figure.
63
63
Figure 4.54
Click Save button to take effect.
4.6.5 SD Card Management
This camera supports SD Card and the max size of SD card must be under 32G.
Go to the SettingsDevice StatusDevice Status page, you can see the SD card status.
64
64
Figure 4.55
The default storage path of alarm record files is SD card, when the available size of SD card is less than 256M,
the old record files will be deleted automatically.
4.8 Firewall
This section explains how to control the access permission by checking the client PC’s IP addresses. It is
composed of the following columns: Block access from these IP addresses and Only allow access from
these IP addresses.
Figure 4.56
Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only
those clients whose IP addresses listed in the Only allow access from these IP addresses can access the
Network Camera. If you select Block access from these IP addresses, only those clients whose IP
65
65
addresses are in the IP list cannot access the Network Camera.
Click Save to take effect.
4.9 System
In this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version, restore
the camera to default settings and reboot the device.
4.9.1 Back-up& Restore
Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future
use.
Click Browse and select the parameters file you have stored, then click Submit to restore the restore the
parameters.
Figure 4.57
4.9.2 System Upgrade
Your current firmware version will be displayed on your screen. You may go to the Device Status
Device
Information Page to check for the latest firmware versions available.
Click Browse, choose the correct bin file and then click System upgrade.
Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result.
66
66
Figure 4.58
Upgrade Firmware by Equipment Search Tool
Double click the Equipment Search Tool shot icon , select the Camera IP that you want to upgrade the
firmware. Then select Upgrade Firmware and enter the username and password, choose the firmware file, and
upgrade.
Figure 4.59
67
67
Figure 4.60
CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don’t
upgrade the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade.
NOTE:
1) Before upgrade the firmware, please unplug the SD card and reboot the camera, don’t upgrade the
firmware in WAN through the web UI, or else the upgrade process may be failed.
2) Please ensure you have download the correct firmware package for your camera before upgrading. Read
the upgrade documentation (readme.txt file) in the upgrade package before you upgrade.
3) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the
readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will
not function correctly if a corrupt .bin file is used.
4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device System
Firmware.
5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected.
6) After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the
default factory settings before using the camera.
4.9.3 Patch Installation
Click "Browse" to select the correct patch file, and then click "Install Patch" to install the patch. Do not turn off
the power during it installing. After installing is complete, you will receive a system prompt.
4.9.4 Factory Reset
Click All reset and all parameters will return to factory settings if selected. This is similar to press the Reset
button on the bottom of the camera.
Figure 4.61
4.9.5 Reboot
Click Reboot System to reboot the camera. This is similar to unplugging the power to the camera.
68
68
Figure 4.62
5 Playback
On this page you can view the record files stored in the SD card.
NOTE:
The FC1403P does not support the function.
Section 1 Define the Record files time and Type
: The storage path of record files
: Here supports three types: current day, current month and All records. Another way,
select the time on the time&date manually.
1
2
3
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB IP1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB IP1600 in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SAB IP1600

SAB IP1600 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info