628387
13
Zoom out
Zoom in
Previous page
1/48
Next page
......
x2
19T Drive Pinion
(H0361-S)
Metric Hex Nylon Nut M3
(HC206-S)
Strong Main Gear
(H0320-S)
Metric Hex Nylon
Nut M2.5
(HC200-S)
M4 Locking Collar
(H0121-S)
Secondary
Shaft
(H0157-S)
37T Pulley
(H0172-S)
Socket Head Cap Screw
M2x5mm
......
x3
Bearing
10x
15x4mm
(HC420-S)
Check the axial play
See Note 1.
Washer
10x
16x0.2mm
(HC232-S)
Front Tail Pulley Low
Assembly
(H0172-S)
One Way Bearing
10x
14x12mm
(HC442-S)
60T Pulley Assembly
(H0171-S)
Bearing
10x
15x4mm
(HC420-S)
Socket Head Cap Screw
Shouldered M2.5x19mm
(HC033-S)
Note 1:
When you tighten the collar (
H0121-S
) on
the main shaft, ensure there is no axial play. Push
down the main shaft while pulling up the locking
collar. Tighten the screw
M4x22
at this time.
Note 2:
The pinion and gear are designed to have zero
backlash. This leads to initial “rough” rotation.
After some run in flights (
3-5 flights
) it will begin
to rotate freely, ensuring perfect contact and
the ability to transmit maximum power.
It is very important to lubricate these two
elements with a lubricant ( Tri-Flow
Synthetic grease).
One Way Bearing
10x
14x12mm
(HC442-S)
6.25 4.8
Main Shaft
(H0127-S)
Main Structure
Assembly 1
Metric Hex Nylon Nut M2.5
Socket Head Cap Screw M4x22mm
......
x1
Socket Head Cap Screw
Shouldered M4x24mm
(HC111-S)
Socket Head Cap Screw Shouldered
M2.5x18mm
Socket Head Cap Screw Shouldered M4x24mm
......
x1
......
x2
Metric Hex
Nylon Nut M4
(HC212-S)
Metric Hex Nylon
Nut M4
(HC212-S)
Socket Head Cap Screw
M4x22mm
(HC104-S)
Socket Head Cap
Screw Shouldered
M3x18mm
(HC079-S)
60T Pulley
(H0171-1)
60T Pulley Assembly
(H0171-S)
Metric Hex Nylon Nut M4
......
x2
Socket Head Cap
Screw M2x12mm
(HC014-S)
Front Tail Pulley Assembly
(H0172-S)
Bush One Way
(H0110-S)
Note:
Put a small amount of grease
every 30/40 flights on the main
gear (for example Tri- flow
Synthetic grease)
Note 2
The perfect play is 0.5mm
add or remove shim for this
Note:
Correct insertion of
the one-way pulley
Copyright © 2013 - SAB Heli Division - All rights reserved
Page 11
Chapter 5, Transmission Assembly
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Heli Division Goblin 770 Competition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Heli Division Goblin 770 Competition in the language / languages: English as an attachment in your email.

The manual is 48,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SAB Heli Division Goblin 770 Competition

SAB Heli Division Goblin 770 Competition Additional guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info