Manual SAB Heli Division Goblin 700 Competition (page 41 of 48) (English)

628338

Zoom out

Zoom in

1/48

Stop Battery Tray

[H0150-S]

- 1 x Stop Battery Tray.

- 2 x Socket Head Cap

Screw M2.5x8mm.

- 1 x Column Belt Tensioner.

- 1 x Tail Belt Idler.

- 1 x Belt Tensioner Arm.

- 2 x Flanged Bearings

7x3mm.

- 2 x Flanged Bearings

9x3mm.

- 1 x Socket Head Cap Screw M3x50mm.

- 1 x Washer

4x0.5mm.

- 1 x Socket Head Cap Screw M3x12mm.

- 2 x Washers

3.2x

6x0.5mm.

- 1 x Button Head Cap Screw M3x4mm.

- 1 x Spring De8/df0.5/LL8.

1 x Block Nut.

1 x Flat Head Cap Screw M3x8.

Block Nut

[H0358-S]

1x Tail Upper Case

Tail Upper Case

[H0360-S]

- 1 x Red Vertical Fin.

- 2 x Socket Head Cap

Screws M3x12mm.

- 2 x Finishing Washers M3.

Red Vertical Fin

[H0117-S]

- 1 x Battery Plate.

- 1 x Battery Protection.

- 2 x Cylinder M2.5.

- 2 x Flat Head Cap Screw

M2.5x5mm

- 1 x Heat Shrink.

- 4 x Landing Gear Struts.

- 4 x Button Head Cap Screws

M4x6mm.

- 4 x Button Head Cap Screws

M4x10mm.

- 10 x Washers

3.1x

12x1.8mm.

Washer

3.1x

12x1.8mm

[H0078-S]

Servo Spacer

[H0075-S]

Landing Gear Struts

[H0074-S]

Belt Tensioner Support

[H0174-S]

- 5 x Uniballs M3x4

5H3.5.

Uniball M3x4

5H3

[H0065-S]

- 4 x Spacers

4x0.5mm

Bell Crank Lever

[H0059-S]

- 1 x Tail Rotor Hub.

Tail Rotor Hub

[H0326-S]

Antenna Guide

[H0050-S]

- 1 x 27T Tail Pulley.

- 1 x Set Screw M4x4mm.

- 6 x Socket Head Cap Screws

M2x5mm.

27T Tail Pulley

[H0102-S]

- 1 x 26T Tail Pulley.

- 1 x Set Screw M4x4mm.

- 6 x Socket Head Cap

Screws M2x5mm.

26T Tail Pulley

[H0103-S]

Tail Rotor Shaft

[H0325-S]

- 1 x Tail Side Plate.

- 2 x Socket Head Cap

Screws M3x12mm.

- 2 x Finishing Washers M3.

- 1 x Linkage Tail Support.

- 2 x Socket Head Cap

Screws M2.5x6mm.

Linkage Tail Support

[H0045-S]

- 3 x Spacer Flybarless.

- 1 x Supporto Flybarless.

- 1 x Flat Head Cap Screw

M3x8mm.

- 5 x Socket Head Cap Screws

M3x6mm.

Battery Tray

[H0149-S]

Plastic Ball Link

[H0066-S]

Uniball M3x4

5H18

[H0063-S]

- 1 x Uniball M3x4

5H18

Uniball M2

5H6

[H0064-S]

Spacer

9x0.5mm

[H0062-S]

- 1 x Bell Crank Base.

Bell Crank Base

[H0058-S]

- 2 x Grips Link.

- 2 x Grip Link Bush.

- 2 x Socket Head Cap

Screws M2x6mm.

Grip Link

[H0056-S]

- 1 x Tail Pitch Slider 01.

- 1 x Tail Pitch Slider 02.

- 1 x Tail Pitch Slider 03.

- 1 x Spacer

9x3.2mm.

- 1 x Uniball M3x4

5H3.

- 2 x Flanged Bearings

12x3.5mm

- 2 x Tail Blade Grips.

- 2 x Bottom Head Cap Screws

M4x8mm.

- 4 x Bearings

10x4mm.

- 2 x Antenna Guide.

- 2 x Button Head Cap

Screws M3x4mm.

Tail Side Plate

[H0359-S]

- 1 x Yellow Vertical Fin.

- 2 x Socket Head Cap Screws

M3x12mm.

- 2 x Finishing Washers M3.

-10 x Servo Spacers.

Tail Case Spacer

[H0061-S]

- 2 x Tail Case Spacers.

- 4 x Socket Head Cap

Screws M3x8mm.

- 5 x Uniballs M2

5H6.

- 5 x Uniball Spacers.

- 5 x Socket Head Cap

Screws M2x8mm.

- 5 x Socket Head Cap

Screws M2x6mm.

- 1 x Bell Crank Lever.

- 1 x Bush Bell Crank.

- 1 x Washer

4x0.5mm.

- 1 x Spacer

4x9.6mm.

- 1 x Socket Head Cap Screw

M3x22mm.

- 2 x Flanged Bearings

7x3mm.

Tail Pitch Slider

[H0053-S]

Tail Blade Grip

[H0327-S]

- 1 x Tail Rotor Shaft.

- 2 x Set Screws M4x4mm.

Yellow Vertical Fin

[H0046-S]

Spacer Flybarless

[H0043-S]

10 x Plastic Ball Link

Spindle

[H0079-S]

- 1 x Spindle.

- 2 x Button Head Cap Screw

M6x10mm.

- 2 x

Washer

14x1.5mm

Boom Spacer

[H0082-S]

- 2 x Boom Spacer.

- 1 x

Set Screw M3x20mm

- 1 x ESC Support.

- 2 x Frame Spacer.

- 4 x Flat Head Cap Screws

M2.5x5mm.

ESC Support

[H0088-S]

- 1 x CF Yellow Landing Gear.

Yellow Landing Gear

[H0106-S]

Bush One Way

[H0110-S]

- 4 x Bush One Ways.

M4 Locking Collar

[H0121-S]

- 1 x M4 Locking Collar.

- 1 x Socket Head Cap Screw

M4x22mm.

- 1 x Metric Hex Nylon Nut M4 H5.

- 1 x Main Shaft.

- 1 x M4 Locking Collar

- 1 x Socket Head Cap Screw

Shouldered M4x24mm.

- 2 x Socket Head Cap Screws

M4x22mm.

- 3 x Metric Hex Nylon Nuts M4 H5.

Main Shaft

[H0122-S]

Radius Arm

[H0132-S]

-2 x Radius Arms.

-2 x Spacer Arm

5x2.7mm.

-2 x Spacer Arm

2.5x

4x6.3mm.

-2 x Uniball Radius Arms.

-2 x Socket Head Cap Screws M3x16mm.

-2 x Socket Head Cap Screws M2.5x18mm.

-2 x Washers

4x0.5mm.

-2 x Flanged Bearings

2.5x

6x2.5mm.

-2 x Flanged Bearings

7x3mm.

Page 39

Chapter 18, Spare Parts

My son has just built a Kraken 700S he has a VBCT Transmitter, a XTareq 4530 550 kv motor and a 200 Hobbywing ESC he would like to know the ideal motor pinion size and settings for his VBCT Submitted on 2-8-2022 at 13:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SAB Heli Division Goblin 700 Competition in the language / languages: English as an attachment in your email.

The manual is 65,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SAB Heli Division Goblin 700 Competition Manual

Product: