628338
23
Zoom out
Zoom in
Previous page
1/48
Next page
TRANSMISSION SETUP
It is important to choose the right reduction ratio to maximize efficiency based on your required flight performance.
The Goblin has many possible reduction ratios at your disposal. It is possible to optimize any motor and battery combination.
It is recommended to use wiring and connectors appropriate for the currents generated in a helicopter of this class.
If you are using a head speed calculator which requires a main gear and pinion tooth count, use
214
teeth for the main gear
(this takes into account the two stage reduction) and the tooth count of your pulley as the pinion count.
Below is a list of available reduction ratios
:
H0175-18-S - 18T Pinion = ratio 11.9:1 H0175-22-S - 22T Pinion = ratio 9.8:1
H0175-19-S - 19T Pinion = ratio 11.3:1 H0175-23-S - 23T Pinion = ratio 9.3:1
H0175-20-S - 20T Pinion = ratio 10.7:1 H0175-24-S - 24T Pinion = ratio 8.9:1
H0175-21-S - 21T Pinion = ratio 10.2:1 H0175-26-S - 26T Pinion = ratio 8.6:1
Note: Although the Goblin can fly at high rpm, for safety reasons we suggest to not exceed 2200 rpm.
Some example configurations:
GOBLIN 700 COMPETITION CONFIGURATIONS
Rev:01
Performace
Battery
Motor
ESC
Pinion
RPM
Max (Gov)
Pitch
GENERAL
12S
5000/5500
Quantum
4530-500
Edge 160 HV (V2)
22T
2100
± 12,5
Jive 120 HV
YGE 160 HV
21T
2100
± 12,5
Kontronik
Pyro 700-520
Edge 160 HV (V2)
22T
2100
± 12,5
Jive 120 HV
YGE 160 HV
20T
2100
± 12,5
12S
5000/5500
Scorpion
HK 4525-520
Edge 160 HV (V2)
23T
2250
± 12,5
Jive 120 HV
YGE 160 HV
KOSMIK 160/200
22T
2250
± 12,5
Quantum
4530-500
Scorpion
4530-500
Edge 160 HV (V2)
23T
2250
± 12,5
Jive 120 HV
YGE 160 HV
KOSMIK 160/200
22T
2250
± 12,5
Kontronik
Pyro 800-48
Jive 120 HV
YGE 160 HV
KOSMIK 160/200
24T
2250
± 12,5
14S
4500
Kontronik
Pyro 800-48
YGE 160 HV
KOSMIK 160
20T
2300
± 12,5
Scorpion
4530-450
Quantum
4530-450
YGE 160 HV
KOSMIK 160
21T
2300
± 12,5
Copyright@2013 - SAB Heli Division - All rights reserved
Page 21
Chapter 11, Installation Of The Motor
23


Need help? Post your question in this forum.

Forumrules
1

Forum

sab-heli-division-goblin-700-competition

Reset search

  • My son has just built a Kraken 700S he has a VBCT Transmitter, a XTareq 4530 550 kv motor and a 200 Hobbywing ESC he would like to know the ideal motor pinion size and settings for his VBCT Submitted on 2-8-2022 at 13:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Heli Division Goblin 700 Competition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Heli Division Goblin 700 Competition in the language / languages: English as an attachment in your email.

The manual is 65,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info