628350

SAB Heli Division Goblin 570 Manual

25
Zoom out
Zoom in
Previous page
1/40
Next page
0.75 mm
H0287
90°
Socket Head
Cap M2.5x6
(HC018-S)
Boom Bolt
Safety lock
(H0287-S)
H0395-S
HC164-S
Metrix Nylon
Screw M8x14mm
(HC164-S)
Plastic Wrench Nut M8
(HA016-S)
Installation Of The Boom
- Insert the boom in place helping enlarging the frame ( Fig 1,2 ).
- Push the boom forward until the nylon bolts bottom out against the end of the slot on the boom.
- Tighten the nylon bolts and only after tighten the two M3x10mm screws.
- For additional safety, install the boom bolt safety lock (Fig 3)
Tail Belt Tension
- Make sure the boom is assembled and installed correctly.
- Loosen up the tail case by loosening the 4 M3 screws.
- Mount the tail belt on the front pulley making sure the direction of rotation is correct (Fig 4).
- Adjust the belt tension by pulling on the tail case.
- Tighten the 4 M3 screws.
- Check that the tail output shaft is perpendicular to the boom (Fig 5).
- Connect the tail push rod to the tail servo.
- Make sure the tail belt and carbon rod are free, check the belt to ensure it is not twisted.
NOTE:
To remove the tail boom from the helicopter, it is possible to remove the front tail pulley
H0304-S without having to loosen up the tail case. Simply remove the locking screw and pull.
Note:
Between the boom and the aluminum
plate, there is a space of around 0.75mm.
Look the picture.
Socket Head Cap
Screw M3x10mm
(HC056-S)
Washer
3.1x
12x1.8mm
(H0078-S)
Copyright @ 2014 - SAB Heli Division - All rights reserved
Page 23
Chapter 13, Boom Assembly
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Heli Division Goblin 570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Heli Division Goblin 570 in the language / languages: English as an attachment in your email.

The manual is 29,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info