628350
16
Zoom out
Zoom in
Previous page
1/40
Next page
X
X
X
X
120°
120°
18.5mm
The servo linkages must be aligned correctly. In order to do this, you must chose from one of the options shown here.
Figure 3 shows the installation of the servos at 120 degrees. Note that the distance between the carbon fiber servo mount and the center of
the ball should be 18.5mm.
Figure 4 shows 4 different mounting options, the distance “X” should be as close as possible to 18.5mm.
Socket Head Cap
Screw M2.5x8mm
(HC020-S)
Servo 3
Servo 1
Servo 2
Servo 1
Servo 3
Servo 2
Installation Of The Swashplate Servos
The distance between the center of the horn and the ball should be between
16-18 mm (Figure 1)
.
Select the carbon fiber servo mount that is suitable for the size of servos to be used
(Figrure 2)
.
16-18mm
H0308
FRONT
Servo Mounting
Servo Mounting Options
Note:
Chamfer Outside In Carbon Parts
Note:
Chamfer Outside In Carbon Parts
Note:
Chamfer Outside In Carbon Parts
Final Servo Assembly
H0064-S
H0031-S
HC008-S
H0392-S
SERVO
H0308-S
HC022-S
H0064-S
HC004-S
H0392-S
SERVO
H0308-S
HC022-S
H0064-S
HC004-S
HC022-S
H0308-S
SERVO
H0392-S
H0064-S
H0031-S
HC008-S
HC022-S
H0308-S
SERVO
H0392-S
Copyright © 2014 - SAB Heli Division - All rights reserved
Page 14
Chapter 7,
Installation Of The Servos
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Heli Division Goblin 570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Heli Division Goblin 570 in the language / languages: English as an attachment in your email.

The manual is 29,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info